I am a noob and just an android enthusiast. All the Galaxy Y roms I had used earlier were stock based. I decided to give Hyperion X a try and I followed the following steps for flashing-
1) Flashed stock ROM
2) Rooted the phone
3) Went into Samsung recovery. Flashed CWM 5.0.2.8
4) Mounted data sytem cache
5) Flashed ext4formatter
6) Without going back to cwm again directly flashed sir nvsetup's kernel
7)Then went back to cwm>advanced>reboot recovery
8) Then formatted data system cache
9) Wiped battery stats and dalvik cache
10) Mounted system data cache sdcard
11) Flashed Hyperion X
12) Flashed gapps
Every time I ended up on a bootloop ( I have tried flashing 4 times :crying: ) Please tell me where I went wrong.
For those who can't install the rom properly you can follow this guide:
-Flash Stock Rom via odin (If you're on stockrom skip this step)
-Flash CWM recovery using stock recovery (v.6.0.1.2 or 5.0.2.8)
-After flashing cwm recovery mount System,Data,Cache
-Flash Cm Specific Kernel
-After flashing cm kernel go back and mount System,Data,Cache
-Flash EXT4 formatter
-After flashing go to advance and recovery and REBOOT RECOVERY
-Now you're on the recovery again now mount System, Data,Cache
-Wipe S,D,C
-Mount S,D,C
-Flash the rom file or zip
-Go back Mount S,D,C
-Flash G-apps
-Reboot Now (Wait for it it takes time to boot the rom )
-Sorry for a long guide it's only for those who cannot understand the instructions given to flash the rom
Sent from my GT-S5360 using Tapatalk 2
Hi, I'm currently running CM12.1 on my LG G2 D802 and I'm planning to upgrade it to CM13. I did some research but since I'm a newbie I would like to ask for some confirmation that following steps are correct:
Download and store following files in device memory:
TWRP BUMP Recovery: http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Hybrid Bootstack: http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Latest CM13 Release: https://download.cyanogenmod.org/get/d802-snapshot.zip
GApps for ARM/6.0: http://opengapps.org/
Reboot to Recovery (currently TWRP v2.8.6.1 )
Flash TWRP BUMP recovery
Reboot to Recovery
Flash Hybrid Bootstack
Reboot to Recovery
Create a backup of currently running system (CM12.1)
Factory Reset
Flash CM13 and GApps
Reboot to System
Did I miss something?
It worked.
Thanks for simplified steps... the ones shown in the Official CM13 thread were a bit confusing. Going to try this now myself
Just some feedback, this worked 100%. Thanks again
i perfer to do a full wipe. factory reset then wipe dalvik, system, data and cache but leave internal storage alone.
I'm using Seraph08 ROM dated 4/23, how do I update to latest version Dirty flash or clean install?
Sent from my ONE A2003 using XDA-Developers mobile app
Dirty Flashing would be fine, but as you are on a month old build, I'd suggest a clean flash.
1. Download the latest ROM from here
2. Copy the downloaded ROM to your Phone with Gapps (arm64, 6.0, nano)
3. Backup all your stuff, if you want to.
4. Enter TWRP, wipe system, data, cache & dalvik.
5. Flash the ROM + Gapps and any other mods you use (xposed, V4A etc)
6. Wipe Cache & Dalvik.
7. Reboot.
8. Profit.
Dirty flash should be ok but, for good measure, wipe your caches after installing and maybe install the latest gapps alongside it.
#Newupdate MIUI8.2 8.2.1.0 Global Stable for MimaxPro
http://bigota.d.miui.com/V8.2.1.0.MBDMIDL/miui_MIMAX652Global_V8.2.1.0.MBDMIDL_9060ae09fa_6.0.zip
ota 8.1.9.0-8.2.1.0
http://bigota.d.miui.com/V8.2.1.0.M...0.MBDMIDI-V8.2.1.0.MBDMIDL-b2511afedf-6.0.zip
formimax650
FullRom http://bigota.d.miui.com/V8.2.1.0.MBCMIDL/miui_MIMAXGlobal_V8.2.1.0.MBCMIDL_ad2db3ac36_6.0.zip
Does it work on mi max 32g global? Thanks in advance
Nano23 said:
Does it work on mi max 32g global? Thanks in advance
Click to expand...
Click to collapse
Yes, it should do.
Note:
Update for Mi Max / Redmi 1S suspended
http://en.miui.com/thread-501418-1-1.html
Waiting for fix the bugs
Plz. Which one is for mi max 32g global version?
---------- Post added at 12:11 AM ---------- Previous post was at 12:10 AM ----------
And how to update i am in miui 8 1.6.0
On my 32GB Global, i had OTA notification for v8.2.1.0 when i was on v8.1.6.0
Downloaded using upgrade tool, installation is ok.
Easily rooted using TWRP after.
I have no information about upgrade mi max plz can somone explain step by step how to do
Thank you very much! Full ROM work like a charm on Mi Max 3/32GB.
It's Android Nougat ?
bortoloj said:
It's Android Nougat ?
Click to expand...
Click to collapse
No, it's Marshmallow 6.0.1.
Why full rom is still unavailable for Fastboot mode ?
How can i install this with TWRP and keep TWRP and keep root and keep my unencrypted internal storage?
Is it rooted or my Mi Max root will be gone, thanks
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Tried it, still on Android 6. Not much different.
Will try the beta 7.2.16.
Can NOT install MultiRom.ME
HawkXP said:
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Click to expand...
Click to collapse
Hi there,
I can not install any version of MultiRom.me ROM, except this one v8.0.1.0 Global Stable. Here is the detail of my weird issue.
A. What do you have?
Mimax 3/32GB with working TWRP 3.0.3-0
https://dl.twrp.me/hydrogen/twrp-3.0.3-0-hydrogen.img
v8.0.1.0 Global Stable ROM flashable .zip file (1)
http://ua.multirom.me/MROTA/STABLE/V8/V8.0/multirom_MIMAX_V8.0.1.0.MBCCNDG_v6.0.1_b13_e685363f8e.zip
v8.2.2.0 Global Stable ROM flashable .zip file (2)
https://vroms2fe7lh.multirom.me/MRO...AX_V8.2.2.0.MBCCNDL_v6.0.1_b24_8c9ad51076.zip
SuperSU 2.79 flashable .zip file (3)
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
B. What process did you use?
Booted to TWRP
Wiped fully (system, data, cache, davik cache)
Installed ROM (saved in USB OTG)
Installed SuperSU (saved in USB OTG)
Wiped Cache & Davik Cache
Rebooted​
C. What is your issue?
If I used the combo (1), (3) and process (B), everything worked well w/o any problem. But,
If I used the combo (2), (3) and process (B), it could not boot up. The Mi logo lighted on in 1s and shutdown immediately later whenever I pressed power button.
In addition, I could not boot into TWRP too.
Now I've been in rom (1) with working TWRP, and still could not flash rom (2).
Kindly help me explain it and show me how to solve this issue.
Thanks and Best Regards,
[email protected]
Hello,
I tried to download v8.2.2.0 Global Stable ROM flashable .zip (2) but I could not access the file (forbidden). So I have no way to test the installation.
Try this:
1. Boot into TWRP.
2. Wipe (system, data, cache, davik cache and internal storage).
3. Install ROM.
4. Go to Mount -> Select , Deselect and Select againSystem. Let it selected.
5. Go to Advanced -> File Manager -> Go to System folder. In root of System it's a file: recovery-from-boot.p. Delete it. In this way, you will not loose TWRP.
6. Go back and install SuperSU.
7. Wipe Cache & Davik Cache.
8. Reboot.
It is possible for the device to auto reboot 2-3 times until the system will load.
See if this will help you.
I cannot flash ROMs, im following steps:
1. boot in TWRP
2. format data, reboot in TWRP
3. wipe (cache, system, vendor, internal storage)
4. install the latest firmware 11.0.4.0
5. install the ROM
6. reboot, but in fastboot mode and it does not allow to enter back to TWRP.
I flash vbmeta.img with PC and flash recovery TWRP 3.3.1-12.
I unlock bootloader in MIUI version 11.0.4.0, Android 10.
Enviado desde mi Mi 9T mediante Tapatalk
elfabo88 said:
I cannot flash ROMs, im following steps:
1. boot in TWRP
2. format data, reboot in TWRP
3. wipe (cache, system, vendor, internal storage)
4. install the latest firmware 11.0.4.0
5. install the ROM
6. reboot, but in fastboot mode and it does not allow to enter back to TWRP.
I flash vbmeta.img with PC and flash recovery TWRP 3.3.1-12.
I unlock bootloader in MIUI version 11.0.4.0, Android 10.
Enviado desde mi Mi 9T mediante Tapatalk
Click to expand...
Click to collapse
I've noticed that wiping system often ends up booting in fastboot on that device.
Wiping system is not necessary since that happens while flashing the ROM.
This is what I did to successfully boot other ROMs than MIUI:
1. boot in TWRP
2. format data, reboot in TWRP
3. wipe (cache, system, vendor, internal storage)
4. install the latest MIUI 11.0.4.0 full ROM
5. reboot in TWRP
6. wipe (cache, internal storage)
7. install the ROM
I always wipe cache/dalvik after installing ROM but I don't think it's necessary.
whoamix3 said:
I've noticed that wiping system often ends up booting in fastboot on that device.
Wiping system is not necessary since that happens while flashing the ROM.
This is what I did to successfully boot other ROMs than MIUI:
1. boot in TWRP
2. format data, reboot in TWRP
3. wipe (cache, system, vendor, internal storage)
4. install the latest MIUI 11.0.4.0 full ROM
5. reboot in TWRP
6. wipe (cache, internal storage)
7. install the ROM
I always wipe cache/dalvik after installing ROM but I don't think it's necessary.
Click to expand...
Click to collapse
Thanks bro, i can flash ROMs
Official twrp goes into fastboot if I try to reboot to recovery without any system installed, but orangefox does that fine
So I recommend orangefox