I am a noob and just an android enthusiast. All the Galaxy Y roms I had used earlier were stock based. I decided to give Hyperion X a try and I followed the following steps for flashing-
1) Flashed stock ROM
2) Rooted the phone
3) Went into Samsung recovery. Flashed CWM 5.0.2.8
4) Mounted data sytem cache
5) Flashed ext4formatter
6) Without going back to cwm again directly flashed sir nvsetup's kernel
7)Then went back to cwm>advanced>reboot recovery
8) Then formatted data system cache
9) Wiped battery stats and dalvik cache
10) Mounted system data cache sdcard
11) Flashed Hyperion X
12) Flashed gapps
Every time I ended up on a bootloop ( I have tried flashing 4 times :crying: ) Please tell me where I went wrong.
For those who can't install the rom properly you can follow this guide:
-Flash Stock Rom via odin (If you're on stockrom skip this step)
-Flash CWM recovery using stock recovery (v.6.0.1.2 or 5.0.2.8)
-After flashing cwm recovery mount System,Data,Cache
-Flash Cm Specific Kernel
-After flashing cm kernel go back and mount System,Data,Cache
-Flash EXT4 formatter
-After flashing go to advance and recovery and REBOOT RECOVERY
-Now you're on the recovery again now mount System, Data,Cache
-Wipe S,D,C
-Mount S,D,C
-Flash the rom file or zip
-Go back Mount S,D,C
-Flash G-apps
-Reboot Now (Wait for it it takes time to boot the rom )
-Sorry for a long guide it's only for those who cannot understand the instructions given to flash the rom
Sent from my GT-S5360 using Tapatalk 2
Related
I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
horatiob said:
I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
Click to expand...
Click to collapse
My suggestion is that your read through the forums here as there are several "beginner guides" that will get you started.
After you installed your first custom rom the process proves itself to be easy:
- Flash a stock ROM (2.2 nordic)
- Acquire root using SuperOneClick
- Instal Clockworkmod recovery/2ndInit (I prefer 2ndInit)
- Transfer the nandroid backup (.zip file) to the root of your SD card
- Reboot phone when led turns blue hit volume down
-Wipe data
-Wipe cache
-Wipe Dalvik (It's under advanced)
-Restore -> select update zip from sdcard
- Browse to the nandroid backup file you put on your sdcard in step 4
Done
I was on with Kingdroid V2.0 with S3 addon. Kernel Speedmod#3.3.
I flashed Criskelo V7 as follows- None of the steps belongs to me-All gathered from this forum, thanks to concerned member/s.
1- download AbyssNote kernel 4.2 (for CWM), Criskelo V7.ROM in SdCard
2- reboot to recovery mode and install AbyssNote V4.2 original touch
3- don't leave recovery , Go back to advanced then reboot recovery
NOW THIS IS TOUCH SCREEN ONLY (buttons will not work)
4- wipe data/factory reset…yes--delete all user data
5- wipe cache partition…yes--wipe cache
6- go to advanced and wipe dalvik Cache…yes--wipe dalvik cache
7- Go back
8- go mount and storage
9- format /cache…yes--format
10- format /system…yes--format
11- format /data…yes--format
12- Go back
Now Flash Criskelo V7 Rom
After installation completed, the phone automatically rebooted into CriskeloRom. Working Nice. About the Phone-Build Number IML74K.XXLQ3 Kernel [email protected]#3.Rom Version CriskeloRom Note ICSv07.
Now I would like to know whether shall I keep this kernel or flash kernel speedmod #3.3 over this kenel. suggestions are appriciated.
Ask the dev which kernel it is.
I think it probably is CF Root kernel.
Hi, my Defy (Green Camera) is stuck on JORDN_U3_97.21.51.sbf - strange chineese Eclair ROM - screenshot here http://forum.xda-developers.com/showpost.php?p=27590063&postcount=4.
I installed it after my battery died during updating Cyanogen to newer version - I panicked a bit and needed working phone asap, so I used mcGyver hack and flashed it with RSD Lite as I found in some guide.
Now I want to install any better system on top of it (it's real crap - all google apps crashes immediately for example) Cyanogen 10+ would be best.
There are some similar threads, but they wanted to downgrade system, not upgrade.
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143 - I didn't tried it yet as download pages
looks suspicious. //edit: downloading it, but it's really slow.
I've also read:
http://forum.xda-developers.com/showthread.php?t=1486731
http://forum.xda-developers.com/showthread.php?t=1365673
http://forum.xda-developers.com/showthread.php?t=1065798
http://forum.xda-developers.com/showthread.php?t=1216982
http://forum.xda-developers.com/showthread.php?t=1795647
What I tried to do so far is:
I. Rooting phone with SuperOneClickv2.3.3-ShortFuse
II. Installing SndInitDefy_1.4_2.apk
III. One of following:
a)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash cm-10-20131030-NIGHTLY-mb526.zip
6) Wipe Cache and Dalvik again
7) Restart.
It didn't boot in 10 minutes (Motorola logo) so I flashed sbf again and returned to I.
b)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash froyo kernel
5) Flash CM10-20120924-NIGHTLY-mb525.zip.
7) Wipe Cache and Dalvik again
8) Restart.
It didn't boot in 10 minutes (Motorola logo) so I flashed sbf again and returned to I.
c)
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash froyo kernel
5) Flash cm-72-20120921-NIGHTLY-Defy.zip
7) Wipe Cache and Dalvik again (recommended).
8) Restart
It didn't boot in 10 minutes (Motorola logo).
I also tried some other Quarx builds, some times with gapps and RLRv2.16_base.zip but I don't remember details.
Any ideas what can I do? Now i'm trying downloading various roms and trying to install them with recovery.
EDIT:
Now I have DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf which works, but I cant root it - zerg rush fails
Well.. After I flash something I don't wipe cache and dalvik , this maybe should be the problem..Before I install something I do a data/factory reset , wipe cache , and then wipe dalvik. You should try after you install something don't wipe cache and dalvik..
OK, i fixed it.
With DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf from http://forum.xda-developers.com/showthread.php?t=1542956 i got root, after that i installed SndInitDefy_2.3.apk and was able to flash CM10.
I rooted the galaxy y, installed CWM, wiped cache and data..etc., installed a custom rom but the phone can't boot..stuck in bootscreen. I tried to change the kernel to CM kernel, and install a stable cm7, everything worked, but still no boot... what can I do?
what rom?
HnnnnnnnnmnHmmmmmmmmGpuuuuuuuuuuuuu
DeniablySam said:
what rom?
HnnnnnnnnmnHmmmmmmmmGpuuuuuuuuuuuuu
Click to expand...
Click to collapse
I've tried NukaRom V1.1.0 and CM7..happened the same..even with CM Kernel
Did you reboot to recovery after flashing kernel & mount system before flashing rom
Instructions to flash cm7
go to cwm
mount system
flash percy's cm #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash cm7 zip
flash gapps (optional)
format data
restart
If you get bootloop remove sim card - if it boots change your stock rom firmware via odin
For stock based roms do as above but use a stock based kernel
marcussmith2626 said:
Did you reboot to recovery after flashing kernel & mount system before flashing rom
Instructions to flash cm7
go to cwm
mount system
flash percy's cm #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash cm7 zip
flash gapps (optional)
format data
restart
If you get bootloop remove sim card - if it boots change your stock rom firmware via odin
For stock based roms do as above but use a stock based kernel
Click to expand...
Click to collapse
Thanks man! It works
I am using GT S5360. I have installed reincarnation pre final and it didn't passed the screen where samsung galaxy Y GTs5360 comes.
I followed the whole procedure but not working. Any help ???
Did you flash kernel?
Mount system?
Remember that naturalizer or touchwiz rom isn't for galaxy y
after you flash percys cm#2 kernel you must reboot to recovery and wipe system data and cache before you flash the rom
the steps are as follows
go into cwm
mount system
flash percys #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash rom zip
format data
restart
if the rom still doesnt boot after that take out your sim card
if the rom now boots you need to change your baseband by flashing a different stock rom firmware via odin
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
aniket.lamba said:
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Click to expand...
Click to collapse
Nthing happened
Still it stops at galaxy y gts5360 screen
marcussmith2626 said:
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
Click to expand...
Click to collapse
Yes, I mount the system and cache
Honey_singh said:
Nthing happened
Still it stops at galaxy y gts5360 screen
Yes, I mount the system and cache
Click to expand...
Click to collapse
have you removed the sim card and see if it booted - please do all the steps I mentioned