Hi,
i got a LG G2 TMobile D801
1. rooted the phone
2. copied latest cm11 nightly and gapps to the phones internal sd card.
3. copied twrp 2.6.3.2 img to internal sd too and flashed it with revoery tool app
4. rebooted into recovery
5. did a factory reset wipe
6. wipe cache
7. wipe dalvik cache
8. tried to flash cm-1-20140109-nighlty-d801.zip
but i keep getting an error message
set_metadata_recursive:some changes failed
E:Error executing updater binary in zip....
Error flashing zip...
Iam stuck in a endless lg loop to recovery twrp
What iam doing wrong???
indianx said:
Hi,
i got a LG G2 TMobile D801
1. rooted the phone
2. copied latest cm11 nightly and gapps to the phones internal sd card.
3. copied twrp 2.6.3.2 img to internal sd too and flashed it with revoery tool app
4. rebooted into recovery
5. did a factory reset wipe
6. wipe cache
7. wipe dalvik cache
8. tried to flash cm-1-20140109-nighlty-d801.zip
but i keep getting an error message
set_metadata_recursive:some changes failed
E:Error executing updater binary in zip....
Error flashing zip...
Iam stuck in a endless lg loop to recovery twrp
What iam doing wrong???
Click to expand...
Click to collapse
Did you try deleting CM and GAPPS and redownloading? Maybe try a nightly or newer/older version. I had this happen to me with another rom, flashed a different version then flashed the most recent and it all went well. Hope this helps!
thanks for your answer but i figured out it was twrp.
somehow i was able to sideload philz latest cwm and was able to flash successfully cm11 and gapps
indianx said:
thanks for your answer but i figured out it was twrp.
somehow i was able to sideload philz latest cwm and was able to flash successfully cm11 and gapps
Click to expand...
Click to collapse
Awesome. Glad you got it sorted.
Please HELP ME!
I am on OOS 2.1.1, rooted and TWRP 2.8.7
installed.
I need to update to OOS 3.5.6.
Can soneone tell me the steps of flashing the
ROM and by which TWRP. And which data to clear.
Basically mention all the steps.
Please...
I will thank you 1000 times.
But please do help me.
Simply download the full 1.2GB OS 3.5.6 zip and flash it in recovery. Before you flash be sure to wipe ALL these folders in twrp : Dalvik, System, Data and Cache.
After wiping then you can flash the zip.
First of all flash latest twrp in twrp recovery than reboot recovery.now you could flash oxygen os 3.5.6 full zip.
I would suggest you to do following steps.
1. Flash OxygenOS 3.1.0 full rom by wiping all except internal storage.
2. Flash latest TWRP 3.0.2-2 from official twrp website. Becoz you won't be able to use old twrp on 3.0.1
3. Flash OxygenOS 3.5.6 full rom by wiping all in twrp except internal storage.
You can get the full roms in xda, spannaa has created a thread.
Note: Keep in mind that when you will uodate from oos 2.2 to oos 3.1 your bootloader will change so you will need latest twrp after installing oos 3.1.0 & when you will uodate from 3.1.0 to 3.5.6 your modem will change. So follow the steps exactly.
Flash Full rom OxygenOS 3.5.6
https://www.androidfilehost.com/?w=...22516d940d25d716555fe376b8858e31ad7cdcae4ce9f
Yes, but last TWRP is necessary, i installed OxygenOS 3.5.5 in TWRP, change to Stock Recovery and update from OTA, but Full ROM can be installed directly from TWRP, Wipe Caché, Data and System is necessary
Hi guys
I updated my OnePlus 5 from this link
https://forum.xda-developers.com/oneplus-5/how-to/official-stable-oxygen-os-5-0-update-t3724247/amp/
how to downgrade oxygen 5.0 to oxygen 4.5.15
I tried many times with many recoveries
Couldn't downgrade please help
Thank you
Please help
Reverting back to the 7.1.1 will require a full install and clean flash (FULL WIPE of all data and cache). Please be aware that all data will be wiped during the revert-back process, so do remember to backup your data in advance.
Stock Recovery:
Download Rollback Build and place it on internal
Reboot to Stock OOS Revovery
Wipe Cache
Select “Install from Local” and choose the downloaded build to install.
Reboot your device after installing the build. You have to re-enter recovery mode to Wipe data cache and Erase everything(Music, pics, etc).
Reboot your device again and you're all good to go.
Custom Recovery | TWRP
Oreo Compatible TWRP
Download Rollback Build and place it on internal
Reboot to compatible TWRP
Wipe Dalvik , System, Data & Cache
Select ROM Zip and Swipe to Flash
Flash SuperSU Beta/Magisk Beta
Wipe Dalvik & Cache
Reboot to OS
hy, you can find all you want here https://forum.xda-developers.com/showpost.php?p=74629867&postcount=3
on: Reverting back to the Official OTA path/7.1.1
Thank you
***Problem Solved***
Hello All,
First of all, Iam a newbie in custom roms so i hope it's not a stupid question...
Couple of months ago i rooted my LG G2 en installed TWRP and after that i flashed Lineageos 14.1.
But i wanna try something else.
I flashed AOSP and works like a charm.
So i decided to flash another one.
But now my phone is stuck on a TWRP loop.
I aleady update twrp to a new version: 3.2.1.0 but it still not work.
What did i do:
Iam going to wipe.
Advanced wipe and wipe:
Dalvik/ART cache
System
Data
And cache
After that iam going to Install:
select the rom and the OpenGapps. (ARM 7.1 Nano)
And confirm flash.
After the flash i wipe Cache and Dalvik and then reboot..
But it's only starting in recovery again and again.
I have tried this roms:
Lineageos
ASOP
CRdroid
Paranoid Android
MK
Ressurection remix
But none of the roms will work
I also tried to wipe Internal storage but unfortunatly that also doesnt work
What iam doing wrong?
Or what can i do to get one of this roms to work?
Thank you
***Problem Solved***
I Found it!!
By Terminal i have to type a code and then another code.
My phone is working again.
i follow the instructions as per omnirom thread... flash the vendor/firmware, wipe data , reboot recovery, and flash the rom, but the omni rom does not boot at all and just shows the OMNI sign on/off. How should i proceed?
Which ROM were you on? What Firmware were you on? Were you Encrypted? Did you only Wipe /Data or did you wipe everything?
Dirk said:
Which ROM were you on? What Firmware were you on? Were you Encrypted? Did you only Wipe /Data or did you wipe everything?
Click to expand...
Click to collapse
Lineageos 15.1 (android 8.1)
I first flashed OOS stock firmware, then OOS, then LOS.
I format data and then wipe dalvik cache, cache, data, system.
datg said:
Lineageos 15.1 (android 8.1)
I first flashed OOS stock firmware, then OOS, then LOS.
I format data and then wipe dalvik cache, cache, data, system.
Click to expand...
Click to collapse
Is your Recovery up to date? I'd recommend the latest Codeworkx TWRP. Did you already have the Vendor partition on your device before attempting to flash Omnirom?
If in doubt flash full OOS 5.1.3 and OTA all the way up to and including 9.0.1. Then reinstall TWRP by fastboot, wipe and format everything and then flash Omni.
Dirk said:
Is your Recovery up to date? I'd recommend the latest Codeworkx TWRP. Did you already have the Vendor partition on your device before attempting to flash Omnirom?
If in doubt flash full OOS 5.1.3 and OTA all the way up to and including 9.0.1. Then reinstall TWRP by fastboot, wipe and format everything and then flash Omni.
Click to expand...
Click to collapse
I still tried, it does not work. My phone got bricked, so I used MSM tool to unbrick and after that I got Nougat 7.1.1. I upgrade my Android to 8.0 (OOS 5.1.3) from system update, and after that update another one came, Android 8.1.1 ( OOS 5.1.7). I then unlock bootloader, flash twrp, flash vendor/firmware, wipe data, flash Omnirom but I get stuck into the omni loading screen. The phone does not load.
datg said:
I still tried, it does not work. My phone got bricked, so I used MSM tool to unbrick and after that I got Nougat 7.1.1. I upgrade my Android to 8.0 (OOS 5.1.3) from system update, and after that update another one came, Android 8.1.1 ( OOS 5.1.7). I then unlock bootloader, flash twrp, flash vendor/firmware, wipe data, flash Omnirom but I get stuck into the omni loading screen. The phone does not load.
Click to expand...
Click to collapse
Okay, i'm not seeing anything about a Format operation there. Wipe does not equal Format. I've just finished setting up Omnirom 9 on my own OP5, so it does work. (Great ROM btw)
Backup everything from Internal Storage to your PC, including all the installation files. The following will wipe your storage!
1) Boot into TWRP
2) Wipe Menu, Advanced, Select all Partitions manually and Wipe
3) Wipe Menu, Format. (Type Yes when prompted)
4) Reboot Menu, Reboot Recovery
5) Copy Installation files from PC to Internal Storage
6) Install Menu, Queue up and install zips in the following order:
i) Vendor/Firmware
ii) ROM
iii) Gapps
7) Wipe Dalvik/Cache when prompted
8) Reboot
9) Set up and done.
Dirk said:
Okay, i'm not seeing anything about a Format operation there. Wipe does not equal Format. I've just finished setting up Omnirom 9 on my own OP5, so it does work. (Great ROM btw)
Backup everything from Internal Storage to your PC, including all the installation files. The following will wipe your storage!
1) Boot into TWRP
2) Wipe Menu, Advanced, Select all Partitions manually and Wipe
3) Wipe Menu, Format. (Type Yes when prompted)
4) Reboot Menu, Reboot Recovery
5) Copy Installation files from PC to Internal Storage
6) Install Menu, Queue up and install zips in the following order:
i) Vendor/Firmware
ii) ROM
iii) Gapps
7) Wipe Dalvik/Cache when prompted
8) Reboot
9) Set up and done.
Click to expand...
Click to collapse
I did it, but I get a bootloop. Omnirom does not boot, it just shows the OMNI logo lights.
datg said:
I did it, but I get a bootloop. Omnirom does not boot, it just shows the OMNI logo lights.
Click to expand...
Click to collapse
The only difference between the two of us that i can see is that i flashed OOS 9.0.1 and booted into it once before doing the steps above.
Don't know if it's relevant but the Vendor/Firmware that i used was 9.0.1 also:
https://drive.google.com/drive/folders/11o0FxZ_rw5lhthGz8_iyYEXBt0dwiv3x
Make sure you nuke everything before starting. Wipe and Format everything. Move installation files across and follow steps.
Dirk said:
The only difference between the two of us that i can see is that i flashed OOS 9.0.1 and booted into it once before doing the steps above.
Don't know if it's relevant but the Vendor/Firmware that i used was 9.0.1 also:
https://drive.google.com/drive/folders/11o0FxZ_rw5lhthGz8_iyYEXBt0dwiv3x
Make sure you nuke everything before starting. Wipe and Format everything. Move installation files across and follow steps.
Click to expand...
Click to collapse
I flashed OOS first and booted everything and I followed the steps and got everything right, but still I get stuck with a bootloop that does not load OmniROM.
Works fine for me;
Flashed the latest OxygenOS. Now you dont need to worry about flashing firmware later in the process.
Enabled unlocking the bootloader in developer menu.
Rebooted into bootloader and flashed the recovery image from clockworkx and booted into twrp recovery.
Wiped everything and formatted data as well.
Reboot recovery.
Flashed rom. I always use sideload but that should not matter. Dont flash anything else; first reboot into your working system.