Hi,
i got a LG G2 TMobile D801
1. rooted the phone
2. copied latest cm11 nightly and gapps to the phones internal sd card.
3. copied twrp 2.6.3.2 img to internal sd too and flashed it with revoery tool app
4. rebooted into recovery
5. did a factory reset wipe
6. wipe cache
7. wipe dalvik cache
8. tried to flash cm-1-20140109-nighlty-d801.zip
but i keep getting an error message
set_metadata_recursive:some changes failed
E:Error executing updater binary in zip....
Error flashing zip...
Iam stuck in a endless lg loop to recovery twrp
What iam doing wrong???
indianx said:
Hi,
i got a LG G2 TMobile D801
1. rooted the phone
2. copied latest cm11 nightly and gapps to the phones internal sd card.
3. copied twrp 2.6.3.2 img to internal sd too and flashed it with revoery tool app
4. rebooted into recovery
5. did a factory reset wipe
6. wipe cache
7. wipe dalvik cache
8. tried to flash cm-1-20140109-nighlty-d801.zip
but i keep getting an error message
set_metadata_recursive:some changes failed
E:Error executing updater binary in zip....
Error flashing zip...
Iam stuck in a endless lg loop to recovery twrp
What iam doing wrong???
Click to expand...
Click to collapse
Did you try deleting CM and GAPPS and redownloading? Maybe try a nightly or newer/older version. I had this happen to me with another rom, flashed a different version then flashed the most recent and it all went well. Hope this helps!
thanks for your answer but i figured out it was twrp.
somehow i was able to sideload philz latest cwm and was able to flash successfully cm11 and gapps
indianx said:
thanks for your answer but i figured out it was twrp.
somehow i was able to sideload philz latest cwm and was able to flash successfully cm11 and gapps
Click to expand...
Click to collapse
Awesome. Glad you got it sorted.
Related
Hi guys. I wanted to install Kit Kat on my defy, follow instruction entered TWRP, nandroid backup, wipe everything except sdcard, install recovery, reboot and now I'm stucked in Android system recovery (3e) and dont know how to proced from here. I only have theses options:
1. Apply sdcard:update.zip
2. Wipe data/factory reset
3. wipe cache partition
Under these it says:
E: Can't mount CACHE:recovery/command
E: Can't mount CACHE:recovery/caller
E: Can't mount CACHE:recovery/log
When I apply sdcard:update.zip it says Faild to open /sdcard/update.zip (No such file or directory), which is normal as my update.zip is on /sdcard/ROM/update.zip.
I also tried to wipe cache partition but nothing happened.
Could someone help me?
brendza said:
Hi guys. I wanted to install Kit Kat on my defy, follow instruction entered TWRP, nandroid backup, wipe everything except sdcard, install recovery, reboot and now I'm stucked in Android system recovery (3e) and dont know how to proced from here. I only have theses options:
1. Apply sdcard:update.zip
2. Wipe data/factory reset
3. wipe cache partition
Under these it says:
E: Can't mount CACHE:recovery/command
E: Can't mount CACHE:recovery/caller
E: Can't mount CACHE:recovery/log
When I apply sdcard:update.zip it says Faild to open /sdcard/update.zip (No such file or directory), which is normal as my update.zip is on /sdcard/ROM/update.zip.
I also tried to wipe cache partition but nothing happened.
Could someone help me?
Click to expand...
Click to collapse
Wich ROM are you using?
brendza said:
Hi guys. I wanted to install Kit Kat on my defy, follow instruction entered TWRP, nandroid backup, wipe everything except sdcard, install recovery, reboot and now I'm stucked in Android system recovery (3e) and dont know how to proced from here. I only have theses options:
1. Apply sdcard:update.zip
2. Wipe data/factory reset
3. wipe cache partition
Under these it says:
E: Can't mount CACHE:recovery/command
E: Can't mount CACHE:recovery/caller
E: Can't mount CACHE:recovery/log
When I apply sdcard:update.zip it says Faild to open /sdcard/update.zip (No such file or directory), which is normal as my update.zip is on /sdcard/ROM/update.zip.
I also tried to wipe cache partition but nothing happened.
Could someone help me?
Click to expand...
Click to collapse
Flash sbf. Root phone. Install cm10.2. Install update-recovery.zip. Install KitKat
Sent from my MB526 using Tapatalk 4
Thank you for answers.
@leandrolutz - It was one that Quarx built, from 02.12.13 CM.
@thekguy - I had to flash SBF, now I'm on Android 2.2.2. I'll follow your instructions. Just have one question, should I install CWM or TWRP? I follow guide, in which I installed update-recovery.zip from TWRP after wiping all date except those on sd-card. then After that, I couldnt get into new recovery. Is this right order to update to KitKat?
brendza said:
Thank you for answers.
@leandrolutz - It was one that Quarx built, from 02.12.13 CM.
@thekguy - I had to flash SBF, now I'm on Android 2.2.2. I'll follow your instructions. Just have one question, should I install CWM or TWRP? I follow guide, in which I installed update-recovery.zip from TWRP after wiping all date except those on sd-card. then After that, I couldnt get into new recovery. Is this right order to update to KitKat?
Click to expand...
Click to collapse
SBF, root, 2ndinit. Then you install CM10 (4.1), reboot, install CM10.2 (4.3), reboot, install update-recovery.zip, REBOOT (without any wipe), install CM11 (4.4).
DO you want to use ART or DALVIK? :highfive:
brendza said:
Thank you for answers.
@leandrolutz - It was one that Quarx built, from 02.12.13 CM.
@thekguy - I had to flash SBF, now I'm on Android 2.2.2. I'll follow your instructions. Just have one question, should I install CWM or TWRP? I follow guide, in which I installed update-recovery.zip from TWRP after wiping all date except those on sd-card. then After that, I couldnt get into new recovery. Is this right order to update to KitKat?
Click to expand...
Click to collapse
You will need to use twrp, the one included with the respective build. From 4.3, you should flash recovery zip, reboot without wiping, and from recovery you should be able to flash kk
There's a button dedicated to thanks
Sent from my MB526 using Tapatalk 4
Thanks all for your help. I installed 4.3 and after that flashed recovery where I made a mistake and wipe dalvik cache after instaling (did this before yours answers):crying:. After restart, I couldnt enter twrp recovery (as soon as I enter defy restarts), only bootmenu and stock recovery from there. Luckily I havent wiped system so I still have 4.3 installed. Then I tried to install recovery from GooManager (didn't make it), stock recovery where I get message: "Failied to verify whole-file signature. Signature verification failed. Installation aborted".
Is there any way to install twrp without having to do all from the begining (sbf, root...)?
Hey guys, problems again. Didnt find way to install recovery so I decided to do all steps (sbf, root, 10.1...) again.
First I entered bootloader, connected usb, RSD lite and flashed same sbf as I did few days ago. Unlike last time, this time it wont flash, RSD did his job (erasing flash memory, flashing code group...) and when it comes to reboting, in RSD is written finished, but defy didnt turn on, not even motorola logo on screen. Take out battery, try to get into stock recovery and bootloader (volume down and up+power on), but still nothing. Then tried other sbf, 3 od them (retail French) but same thing happened every time, dead screen). Only thing that points that tel.is alive is white led that turns on when I connect it to PC.
I cant understand why 2 days ago when I flashed sbf, everything was fine and this time it refuses do complete. Only difference is that this time it was installed Android 4.3 and last time 4.2.2.
Any suggestions.
If your current sbf isn't working, try dfp 231 or a sbf newer than your current one. It should get you at least to stock recovery, from where you can wipe data and revive your defy.
From 4.3, just flash update recovery, don't wipe or flash anything else. Reboot, and enter recovery once again. Now install 4.4 and it should work
Although, that should not have occurred just by dalvik wipe. Make sure the 4.3 build you use is recent
FYI you could have fixed recovery by extracting and overwriting bootmenu folder from zip
Sent from my MB526 using Tapatalk 4
Hey thekguy, thank you very much. I managed to revive my defy with 4.5.1-134 DFP-231 Retail.en.EU CEE and now I'm using Android 2.3.6. I'm reading another topic http://forum.xda-developers.com/showthread.php?t=1820282 where it says that after flashing 4.5.1-134 DFP-231 Retail.en.EU CEE, it should than be flashed with rooted SBF 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF.
Should I also flash this second SBF or go directly to 4.3?
Thanks again.
Root with framaroot, no need for 2nd sbf
Sent from my MB526 using Tapatalk 4
Hi,
I was using Slimkat 4.2 with TWRP recovery. Wanted to update to the latest stable build. Did so. Now I'm stuck in a bootloop.
1) I restarted in bootloader, went to advanced wipe and wiped system, dalivik cache and cache.
2) Then I flashed the file (Slim-grouper-4.4.4.build.7.0-OFFICIAL). Sha1 check out. My device is a nexus 7 2012 (non 3g).
3) on top of that, I flashed the latest gapps normal.
Bootlooped.
1) I'm able to enter into bootloader.
2) I do not have a backup of my previous instal
3) I am unable to mount usb through the twrp mount interface.
Could somebody help me here? I seem to be making a lot of mistakes with this after successfully flashing my phones for years (just recently I got a "enter password to decrypt device" on the same nexus 7 that I got through by formating through twrp.
Should I try wiping and flashing the rom again, without the gapps? (By wiping system, dalivik cach and cache)?
Are there other methods I could use?
Help would be greatly appreciated!
Please note that I can easily get into fastboot mode. When I'm at fastbook, should I just try to return to stock? I'm not exactly sure how that would work given that I have a custom recovery and rom installed.
Should I try to use sideload adb to instal the rom/original rom for the device again?
Hi, I'm currently running CM12.1 on my LG G2 D802 and I'm planning to upgrade it to CM13. I did some research but since I'm a newbie I would like to ask for some confirmation that following steps are correct:
Download and store following files in device memory:
TWRP BUMP Recovery: http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Hybrid Bootstack: http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Latest CM13 Release: https://download.cyanogenmod.org/get/d802-snapshot.zip
GApps for ARM/6.0: http://opengapps.org/
Reboot to Recovery (currently TWRP v2.8.6.1 )
Flash TWRP BUMP recovery
Reboot to Recovery
Flash Hybrid Bootstack
Reboot to Recovery
Create a backup of currently running system (CM12.1)
Factory Reset
Flash CM13 and GApps
Reboot to System
Did I miss something?
It worked.
Thanks for simplified steps... the ones shown in the Official CM13 thread were a bit confusing. Going to try this now myself
Just some feedback, this worked 100%. Thanks again
i perfer to do a full wipe. factory reset then wipe dalvik, system, data and cache but leave internal storage alone.
i flashed twrp and installed the zip directory via the bootloader.
My friend told me i also had to wipe davik and art cache after installing.
Now my phone is in a bootloop and my friend isn't available to help.
any ideas?
I was on 10T official. I decided to unlock bootloader, I followed the guide, I my storage was unencrypted...
I have unlocked bootloader and then installed TWRP 3.1.1.
After a boot, I have installed a Stock modified ROM (Fulmics ROM 2.0).
After reboot, the phone is stuck on LG logo, and after minutes it reboots and stucks on LG logo and the reboot...... etc etc
Entering TWRP again, it says my Data is encrypted and asks me for the password.
I have formatted Data, and reinstalled Fulmics ROM, but, same problem. Stuck on LG logo. Now entering TWRP there is no partition encrypted... but...
What should I do now?
Reinstall stock using LGUP
galerio said:
I was on 10T official. I decided to unlock bootloader, I followed the guide, I my storage was unencrypted...
I have unlocked bootloader and then installed TWRP 3.1.1.
After a boot, I have installed a Stock modified ROM (Fulmics ROM 2.0).
After reboot, the phone is stuck on LG logo, and after minutes it reboots and stucks on LG logo and the reboot...... etc etc
Entering TWRP again, it says my Data is encrypted and asks me for the password.
I have formatted Data, and reinstalled Fulmics ROM, but, same problem. Stuck on LG logo. Now entering TWRP there is no partition encrypted... but...
What should I do now?
Click to expand...
Click to collapse
Restore the official firmware with LGup, install again the TWRP, make a format data (format, not wipe), install whatever you want to get twrp stuck (SuperSU, magisk ECC...), Reboot system, then reboot in twrp, manually or by a rebooter app, wipe system, data, cache and dalvik, install fulmics with your favourite aroma settings, after that reboot recovery, flash the 2.1 ota, and reboot system.
Now wait some minutes, it'll reboot again once, it's normal, when happens just wait again for some minutes, and it should boot normally.
I've installed this rom a bunch of times (for a bunch of reasons) and never had Bootloop problems doing this.
Good luck:good:
Thanks, stock firmware like this one? https://forum.xda-developers.com/lg-g6/development/rom-h870-10f-rom-imgs-kdz-t3615183
And in LGUP should I do anything particular? Or just reinstall kdz?
Then, should I format only Data partition or also system or others?
You can decrypt data through fastboot
galerio said:
Thanks, stock firmware like this one? https://forum.xda-developers.com/lg-g6/development/rom-h870-10f-rom-imgs-kdz-t3615183
And in LGUP should I do anything particular? Or just reinstall kdz?
Then, should I format only Data partition or also system or others?
Click to expand...
Click to collapse
Here it is the kdz: https://lg-firmwares.com/download-file/?fileId=10110
Just reinstall the kdz with upgrade option.
You have only to format data (not wipe, remember).
Thanks, worked!
Mmm... No, I was able to reinstall stock rom, but then, when I try to format Data I get error like "Failed to unmount /system (Device or resource busy)" and then "Failed to mount /data", "Unable to recreate /data/media folder...
And also when I install Magisk I have those errors... (Failed to mount system and data).
Booting up, stock rom is ok, and also Magisk, so phone is rooted.
But when I reboot to recovery and I install fulmics rom, it seems to install correctly, it shows a final error of mount system and when I boot I still have stock rom, without Magisk or fulmics settings... so It is not installed fulmics rom! Tomorrow I will try another time. By now I keep stock rom rooted. Anyway I'm happy to see how easy is to reinstall stock rom.
galerio said:
Mmm... No, I was able to reinstall stock rom, but then, when I try to format Data I get error like "Failed to unmount /system (Device or resource busy)" and then "Failed to mount /data", "Unable to recreate /data/media folder...
And also when I install Magisk I have those errors... (Failed to mount system and data).
Booting up, stock rom is ok, and also Magisk, so phone is rooted.
But when I reboot to recovery and I install fulmics rom, it seems to install correctly, it shows a final error of mount system and when I boot I still have stock rom, without Magisk or fulmics settings... so It is not installed fulmics rom! Tomorrow I will try another time. By now I keep stock rom rooted. Anyway I'm happy to see how easy is to reinstall stock rom.
Click to expand...
Click to collapse
Try to download twrp from the official twrp post. There are some problems with twrp /system mount. Then format data and install magisk the first time.
mprovi_15 said:
Try to download twrp from the official twrp post. There are some problems with twrp /system mount. Then format data and install magisk the first time.
Click to expand...
Click to collapse
I downloaded the official one from twrp.me version 3.1.1.0 2017-06-30. Is there any new beta/modded twrp to install?
galerio said:
I downloaded the official one from twrp.me version 3.1.1.0 2017-06-30. Is there any new beta/modded twrp to install?
Click to expand...
Click to collapse
In my case the official twrp from twrp.me had the problem of unable to mount system. I read all the twrp Guide from LG G6 in rom, recovery root section and I read that had some problems and they posted an usefull twrp. Try downloading twrp from these post.
I've installed experimental TWRP over official TWRP posted here https://forum.xda-developers.com/showpost.php?p=73071238&postcount=228 and works, no more mount error.
Now I have installed Fulmics rom. I'm happy!
Thanks to all