I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
Removed!!
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
FAIL! Model dismatch fail
All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
it really says that. I copied and pasted that.
There was no failure on the phones boot loader screen either.
Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch
BrokenMessiah said:
Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch
Click to expand...
Click to collapse
well mine says model " dismatch " not model mismatch
I put a custom rom on it maybe that will fix it.
I got mine working. I used this rom and this odin
firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
I had the same problem. I downloaded version 3.12.3 of Odin and used that instead and that worked.
Related
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
do you get a yellow port mapping?
mjz2cool said:
do you get a yellow port mapping?
Click to expand...
Click to collapse
Yes i do
danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
Maybe the files are corrupt.
Press THANKS please?
danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
SetupConnection..
Can't open the serial(COM) port.
All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
Run kies first...
Then close kies and then install firmware through odin ...
It will work......
Sent from my GT-S5360
danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
did u get yello icon in odin
Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.
I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?
Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4
Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!
I have Galaxy S4 (i9505). Custom ROM, rooted (Flashed by Odin).
Then i tried to flash recovery TWRP. Found my version of TWRP recovery on official site, downloaded an install for odin.
Then tried to flash and THIS happened - FAIL. I started to panic, tried to start again, and it's failed again, because PIT wasn't found
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
After that I didn't know really what to do. and tried to flash firmware stock, but it has same result. No PIT.
So then i found the PIT file from reading the forum, and downloaded it for my i9505, and flash it with and without firmware stock. That's the log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> Removed!!
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Added!
It seems like phone every time disconnects while PIT is flashing. Even Re-Partition is checked on.
Sorry for my english, if I said something grammatically wrong. Please help!
did you try with a other cable, cuz it looks like the phone disconnect (Like you said).
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Thx i will try it!
THANK YOU SO MUCH!
I did it! I have uninstall my KIES from computer with Samsung driver.
Then i downloaded one of firmware stock from that link, it was 4 file installation in Odin. Restarted my computer and then tried to flash it.
It works! Thank you for my unbricked phone
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
cwis said:
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
Click to expand...
Click to collapse
if you are using a prince cosmey or custom odin with orange text on left of apps header download an official odin assuming your trying to flash a stock firmware. should fix custom odin only flashes root stuffs
It worked. Now I'm debating rooting again but the lag is still difficult.
Thank you for the help.
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Whicho_castillo said:
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Click to expand...
Click to collapse
Samsung Odin 3.13.1
instrumentaly said:
Samsung Odin 3.13.1
Click to expand...
Click to collapse
Thank you so much dude, it actually worked, Thank you so much.
Hi im using a samsung galaxy s7 edge (SM-G935F)(VDF).
And im trying to flash the 8.0.0 stock rom.
but it keeps saying.
<ID:0/003> Odin engine v(ID:3.1207).
.<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i do have the samsung drivers installed and a good usb cable.. and port,
my phone is in odin mode i really dont know anymore,
ive tried 9/10 odin version and all thesame.
Thanks in advance
Edit: I got it to work by using 3.13B version odin, i was in the wrong download mode i got into it using twrp
Edit 2: Nevermind Complete(Write) operation failed.
Edit 3: i dont want to be the guy without the source but i dont im sorry, the best i have is this
G935FXXU2EREM_G935FOJV2ERE8_TUR, thanks everyone for helping me
Go into Developer Options and check OEM Unlock
PixelIsHere said:
Hi im using a samsung galaxy s7 edge (SM-G935F)(VDF).
And im trying to flash the 8.0.0 stock rom.
but it keeps saying.
<ID:0/003> Odin engine v(ID:3.1207).
.<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i do have the samsung drivers installed and a good usb cable.. and port,
my phone is in odin mode i really dont know anymore,
ive tried 9/10 odin version and all thesame.
Thanks in advance
Click to expand...
Click to collapse
Use odin 3.13b from the xda forums
3.12 has no oreo support
pingufanpoy said:
Use odin 3.13b from the xda forums
3.12 has no oreo support
Click to expand...
Click to collapse
Still doesnt work for me for some reason,
i used https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. i supposed that was the right forum.
i tried Odin3 v3.13.1_3B_PatcheD.zip, and got this http://prntscr.com/ke7mdf
i tried Odin3_v3.13.1.zip too and i got thesame result.
PixelIsHere said:
Still doesnt work for me for some reason,
i used https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. i supposed that was the right forum.
i tried Odin3 v3.13.1_3B_PatcheD.zip, and got this http://prntscr.com/ke7mdf
i tried Odin3_v3.13.1.zip too and i got thesame result.
Click to expand...
Click to collapse
is this for all slots all fail?
flash it individually each box
pingufanpoy said:
is this for all slots all fail?
flash it individually each box
Click to expand...
Click to collapse
Oh i actually didnt know that was possible, it seems to get stuck at AP, BL is fine, i suppose the others are fine too
Edit: AP failed
Edit 2: Both CP and CSC succeeded im gonna look for a better AP
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
OH thats a very good reason ill download it again
Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
Dammit i had so much hope in that, still thesame error
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3940 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
This was the solution
I found a file with the right AP.. atleast im pretty sure its still charging
i dont want to be the guy who doesnt have the sauce, but i dont.
by the time you see this ive edited the post