Database Users

[Q]Odin????

i keep gettin this error below does anyone know how to fix it?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

You didn't have your tab in download mode. Completely power off your tab. Then at the same time push power and volume down and hold until black screen has a yellow image. That is download mode, and now, start odin, and connect your tab. One of the rectangles will turn yellow and say COM....You are ready to flash!

Odin fail again and again

Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Mh...... odd
Sent from my LG-LS970 using xda app-developers app

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Sorry, but you can't mention the name of banned roms here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.

luqman98 said:
Sorry, but you can't mention the name of banned roms" here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.
Click to expand...
Click to collapse
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia

devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
Banned roms are ROMs that are banned by xda members. It is caused by violating xda rules. Example, Jellyblast rom were banned because Avijit (creator) linking to a download which took you to an ad site and Nemesis is banned because containing warez and steal other's work.

better to install kies first
devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
If u have latest samsung drivers, then u should not get error... i'll advice to download latest kies from the samsung site.... install it... & then try odin..
i faced this problem long ago, & solved by this way...
as u know, dont use pit file.. dont clck on repartition...
best luck

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Use newer versions of Odin like Odin 3.0+
And make sure adb.exe/Kies.exe/Kiesxxxxxxxxxx.exe r not running

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Question:
Is this your first time flashing Odin?
Yes: Then first install KIES, but your stock driver is preferable (you know.. the one that comes with the box) to avoid incompatibilities, the install odin; i personally use Odin3 v1.85 and it has never failed me once.. and I have tried almost every ROM and kernel for Y. Close KIES before flashing.
No, I have done this before: Did you try another USB port or another computer? Assuming you didnt interchange the 3 files when flashing, did you remove the battery and let the fone discharge for atleast 1 minute and also did you remove the SD card. Sometimes there are files and script from your custom Roms that messes with odin so remove SD card prior to flashing.
There is another method you can do, I myself have used this twice to get out of a quite sticky softbrick... but I do not recommend it, Using a totoro pit file. If all other method fails this will MAY get you out
1. after placing PDA, MODEM and CSC... put the totoro pit file on "PIT", LEAVE BOOTLOADER ALONE!!!
2. Click repartition and NOTHING ELSE!!!
3. Click start
4. Hope for the best:fingers-crossed::fingers-crossed::fingers-crossed:

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
did u install drivers of ur phone and started odin as administrator

As stated by a user above that make sure adb, kies ,any software that uses ur phobes usb is not running....
In odin make sure re-partition is disabled and dont use a pit file
All u need to use is pda,csc,phone,
Not even bootloader
Check whether the usb is nit interupted by anything during the flash...
Sent from my GT-S5360 using xda app-developers app

[ODIN] Bricked Galaxy S4 (i9505)

I have Galaxy S4 (i9505). Custom ROM, rooted (Flashed by Odin).
Then i tried to flash recovery TWRP. Found my version of TWRP recovery on official site, downloaded an install for odin.
Then tried to flash and THIS happened - FAIL. I started to panic, tried to start again, and it's failed again, because PIT wasn't found
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
After that I didn't know really what to do. and tried to flash firmware stock, but it has same result. No PIT.
So then i found the PIT file from reading the forum, and downloaded it for my i9505, and flash it with and without firmware stock. That's the log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> Removed!!
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Added!
It seems like phone every time disconnects while PIT is flashing. Even Re-Partition is checked on.
Sorry for my english, if I said something grammatically wrong. Please help!

did you try with a other cable, cuz it looks like the phone disconnect (Like you said).

Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727

jd1639 said:
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Thx i will try it!

THANK YOU SO MUCH!
I did it! I have uninstall my KIES from computer with Samsung driver.
Then i downloaded one of firmware stock from that link, it was 4 file installation in Odin. Restarted my computer and then tried to flash it.
It works! Thank you for my unbricked phone

[Help Needed] Soft-Bricked my phone. i9505

So, my phone was giving me problems, too much battery consumption, the keyboard would sometimes lag and i would get weird words and phrases... so i though, well, i have an android! why not making the most of it and trying a custom rom? Geez, i tried installing first CWM since i had no recovery mode besides the stock one, and i bricked the phone. How? dunno, i tried twice in two different computers and all the times i would get an error, Odin would start writing.... and stop, then the phone disconects and connects back (windows makes that sound) and now it seems that i broke the partition tables. I found a .pit file for my phone ("CSB_signed_Fusion3_EUR_0325_V2"), and i have the stock rom ("I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar") (im downloading also one from sammobile just in case). But.. nope, odin doesn´t want to work, i just get the following
Without the .pit file
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
Click to expand...
Click to collapse
With .pit file
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
Click to expand...
Click to collapse
So, since ive tried in different USB ports, and different computers, and im getting the same resoult, i guess that my problem lies with the usb cable, ill try to get one tomorrow (its 2.08 here in sweden) but im posting in case there are other solutions. Btw, ive also tried Heimdall Suite (it was already bricked so... why not) and i get another error. Like if the computer couldnt communicate with the phone. YES i do have installed the drivers. Yes ive also use zadig to change/install the drivers with no solution.
Thanks for your help. *insert banana here as sign of my gratitude*
Yes, i wont mess with my phone again, ever.
Additional info: Galaxy s4 i9505 "north countries/baltic/north" edition (from sweden, tele3)

You probably just a need an other usb cable. Don't worry, you will get your phone up and running again.

Trying to Flash Back To Stock S7 930A

I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
Removed!!
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
FAIL! Model dismatch fail
All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
it really says that. I copied and pasted that.

There was no failure on the phones boot loader screen either.

Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch

BrokenMessiah said:
Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch
Click to expand...
Click to collapse
well mine says model " dismatch " not model mismatch

I put a custom rom on it maybe that will fix it.

I got mine working. I used this rom and this odin

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
I had the same problem. I downloaded version 3.12.3 of Odin and used that instead and that worked.