Database Users

Can't flash files using Odin

Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.

I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.

Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4

squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?

Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4

Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...

Did you use the original samsung cable for flashing?Using another cable often cause issues.

Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.

Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!

[Q] I9505 with radio issues

Hi,
Since I dont have 10 posts and cant post on the Android Development forum I guess I need to post here instead. I flashed my I9505 with Android 4.3 v.2.2 of this firmware http://forum.xda-developers.com/showthread.php?t=2341026 , which worked awesome except for a couple of force close and reboots. Perfect LTE and HSPA. I recently flashed it with the updated version Android 4.4 v.2. Everything works awesome except LTE or 3G, when trying to use those 2 the phone does not connect to a tower, doing a forced scan and connect works for a very short while and I get kicked off. Forcing 2G/Edge works perfect though!
1. When I flashed 4.4 V2, is it possible that it may somehow changed my radio firmware or can this only be done via odin? (I used philz to flash to 4.4 v2 without doing a full wipe, I wanted to keep settings/apps etc)
2. When checking here http://www.sammobile.com/firmwares/2/ under I9505 and my country South Africa(Vodafone/Vodacom), the radio version on the site and on my phone correlates
GT-I9505 Galaxy S 4 LTE
BASEBAND -> MODEM: I9505XXUBMGA
What may have caused the phone to loose HSPA and LTE connectivity?
Thanks in advance for the replies.

Ne3M said:
Hi,
Since I dont have 10 posts and cant post on the Android Development forum I guess I need to post here instead. I flashed my I9505 with Android 4.3 v.2.2 of this firmware http://forum.xda-developers.com/showthread.php?t=2341026 , which worked awesome except for a couple of force close and reboots. Perfect LTE and HSPA. I recently flashed it with the updated version Android 4.4 v.2. Everything works awesome except LTE or 3G, when trying to use those 2 the phone does not connect to a tower, doing a forced scan and connect works for a very short while and I get kicked off. Forcing 2G/Edge works perfect though!
1. When I flashed 4.4 V2, is it possible that it may somehow changed my radio firmware or can this only be done via odin? (I used philz to flash to 4.4 v2 without doing a full wipe, I wanted to keep settings/apps etc)
2. When checking here http://www.sammobile.com/firmwares/2/ under I9505 and my country South Africa(Vodafone/Vodacom), the radio version on the site and on my phone correlates
GT-I9505 Galaxy S 4 LTE
BASEBAND -> MODEM: I9505XXUBMGA
What may have caused the phone to loose HSPA and LTE connectivity?
Thanks in advance for the replies.
Click to expand...
Click to collapse
Please use the search button next time , because this has been answered so many times. and if you have any problem please post it in here.http://forum.xda-developers.com/galaxy-s4/help and in order to fix your problem you need to update your modem sir. have a nice day.
Edit: Mods please move this thread in a right section . thanks

Repulsa said:
Please use the search button next time , because this has been answered so many times. and if you have any problem please post it in here.http://forum.xda-developers.com/galaxy-s4/help and in order to fix your problem you need to update your modem sir. have a nice day.
Edit: Mods please move this thread in a right section . thanks
Click to expand...
Click to collapse
Ok, tried flashing the modem with Odin 3.04 and fails with I9505_XXUBMH1_MODEM.tar.md5 which is an upgrade to I9505XXUBMGA?! When I google how to upload the modem firmware there are many variants. What is the CORRECT method to upload a modem to a i9505 using Odin? I dont want to brick my phone.

Ne3M said:
Ok, tried flashing the modem with Odin 3.04 and fails with I9505_XXUBMH1_MODEM.tar.md5 which is an upgrade to I9505XXUBMGA?! When I google how to upload the modem firmware there are many variants. What is the CORRECT method to upload a modem to a i9505 using Odin? I dont want to brick my phone.
Click to expand...
Click to collapse
Bro download and unzip this file http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar then flash it with odin by selecting phone. Let me know if that fix your problem

It hangs on setup connections.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Again I ask what is the exact/correct procedure to do a flash for I9505? I assume I should extract the RAR first to a .TAR which I did and then what?

Ne3M said:
It hangs on setup connections.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Again I ask what is the exact/correct procedure to do a flash for I9505? I assume I should extract the RAR first to a .TAR which I did and then what?
Click to expand...
Click to collapse
You have to extract it and then you open odin and select phone on odin and find the file you extract then on your phone power off manually and wait 5 sec and hold power+volume down in order to go to download mode and connect the cable andpress start in odin . done/

Repulsa said:
You have to extract it and then you open odin and select phone on odin and find the file you extract then on your phone power off manually and wait 5 sec and hold power+volume down in order to go to download mode and connect the cable andpress start in odin . done/
Click to expand...
Click to collapse
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And I get this error if I try again:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Still not working
It says write protect enable on the phone. Is this my problem? and how do disable it?

Ne3M said:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And I get this error if I try again:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Still not working
It says write protect enable on the phone. Is this my problem? and how do disable it?
Click to expand...
Click to collapse
I just flashed the file via odin then select PHONE and it works alright here and i dont understand why it doesnt work for you when someone been using that file. try another file from here http://forum.xda-developers.com/showthread.php?t=2192025

Repulsa said:
I just flashed the file via odin then select PHONE and it works alright here and i dont understand why it doesnt work for you when someone been using that file. try another file from here http://forum.xda-developers.com/showthread.php?t=2192025
Click to expand...
Click to collapse
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!

Ne3M said:
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!
Click to expand...
Click to collapse
glad it works try to update your samsung driver prolly this is the one that causing it . but its not that bad to give it a try have a nice day

Ne3M said:
That is where I got my first files from that did not work as well...
edit: after numerous attemps I got it to work. Yay!
Click to expand...
Click to collapse
Edit: Even with the new radio. Same problems. 3g & LTE not working. 2G works flawless....

Hello,
You are tried from recovery factory resset and clean dalvik?
Sent from my GT-I9505 using Tapatalk 2

bogdan109 said:
Hello,
You are tried from recovery factory resset and clean dalvik?
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Same problem and lost all data on my phone now:crying:
Edit:
This modem I9505XXUEMKE-MODEM seems to work. From the thread it is a ROM issue, I hope I now have enough posts to post on the developer section. Other people had the same complaints, I seemed to be one of the first.

ne3m said:
same problem and lost all data on my phone now:crying:
Edit:
This modem i9505xxuemke-modem seems to work. From the thread it is a rom issue, i hope i now have enough posts to post on the developer section. Other people had the same complaints, i seemed to be one of the first.
Click to expand...
Click to collapse
did u find a fix?
xxuemke modem didnt work for me

I flashed with latest I9505 firmware from Sammobile website. Updated Radio, bootloader and camera firmware automatically! Then you can flash whatever you want. You must also check that the modem you use is compatible with your country.

Trying to Flash Back To Stock S7 930A

I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
Removed!!
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
FAIL! Model dismatch fail
All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
it really says that. I copied and pasted that.

There was no failure on the phones boot loader screen either.

Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch

BrokenMessiah said:
Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch
Click to expand...
Click to collapse
well mine says model " dismatch " not model mismatch

I put a custom rom on it maybe that will fix it.

I got mine working. I used this rom and this odin

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
I had the same problem. I downloaded version 3.12.3 of Odin and used that instead and that worked.

Tried to use ODIN but...FAIL! Model dismatch fail

The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.

cwis said:
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
Click to expand...
Click to collapse
if you are using a prince cosmey or custom odin with orange text on left of apps header download an official odin assuming your trying to flash a stock firmware. should fix custom odin only flashes root stuffs

It worked. Now I'm debating rooting again but the lag is still difficult.
Thank you for the help.

What odin did you use share the link, I've been having the same problem over and over
HELP!!!

Whicho_castillo said:
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Click to expand...
Click to collapse
Samsung Odin 3.13.1

instrumentaly said:
Samsung Odin 3.13.1
Click to expand...
Click to collapse
Thank you so much dude, it actually worked, Thank you so much.

Unroot and reset back to "as new"

So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?

Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade

SevenD2 said:
Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade
Click to expand...
Click to collapse
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.

xScylez said:
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.
Click to expand...
Click to collapse
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download

xScylez said:
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download
Click to expand...
Click to collapse
Use this instead https://updato.com/firmware-archive-select-model

update Odin

xScylez said:
So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?
Click to expand...
Click to collapse
note that you will not be able to restore it 100%. Knox is and will be forever broken on your phone. And for that, all Knox related functions won't work either.

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
After loading all and press Start i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5641 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and when using the home_csc i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 3834 M
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Maybe trying using Prince comsy Odin
https://drive.google.com/file/d/1enVG5a_ocyjhRlta8AX_0b7LLoHWciVU/view
(Not my link)
Given you were able to install TWRP I assume your phone can connect to your laptop so idk why it's not working. A quick Google search found people used older versions of Odin to get it working.