Database Users

Can't flash files using Odin

Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.

I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.

Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4

squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?

Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4

Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...

Did you use the original samsung cable for flashing?Using another cable often cause issues.

Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.

Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!

rogers signal problem after kitkat/fail odin

hey so ive been doing some research. my rom currently is cm 4.4 kitkat for can variant. the problem is i have 1 bar with lte, ive read that i needed to update my modem with odin. i tried this with the latest file found in the threads and made sure it was for canada. this is the error i got. also i tried flashing my phone with dandroid 4.4 and i actually get no service at all, played with apn settings and nothing. any help here would be awsome.
New edit..
So I figured out what I did wrong in the previous post. But now I have a new question. I have tried to flash my modem to to the most current using Odin
On the computer it said succsssful but the phone said downloading, for maybe like 4 minutes and I did a battery pull. Tried 3 different Roms LTE does not work all. But 3g does any help would be nice
new edit went back on android 4.2.2 and lte works fine. before i flashed the modem i had bad reception with lte on kitkat but now with the current I337MVLUEMK6 baseband i wont even go on lte. when i try to use mobile odin it says the device is not compatible and it asks to make a backup. Seems like lots of canadians are having this problem anyone, anyone got any ideas? (tried 3 different 4.4 roms still no lte)
message i got <ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

I have the same error message when trying to flash modem.
And if I flash modem and hlos with mobile odin I have no sound.
I never had issues flashing modem or hlos
Updated drivers and still no go with odin. Any help im still on 4.2.2 mg1
Sent from my SGH-I337M using xda app-developers app

bump!

I received the an error in odin as well when trying to flash I337MVLUEMK6.
FAIL! (Auth) along with "secure check fail: mdm"
I was able to flash it successfully with mobile odin which seems to perform the flash without using the device's bootloader (original odin)
In any case, I too have no LTE. Is there anyone here with SGH-i337m on 4.4 with working LTE?

Mine works perfectly. I'm on kitkat 4.4 rom
Samsung galaxy s4 Canadian i337m

Well, I solved my problem. For some reason the default APN was set to "rogers-core-appl1.apn" switching to the LTE apn, "ltemobile.apn" fixed all of my issues so far.

[Q] How can I SIM unlock my Canadian S4 ?

I have 3 i337m running 4.3 original firmware.One is Bell, 1 Rogers, 1 Telus.
I've tried all the methods I could find that include downgrading, rooting etc. I cannot seem to get access to the UMTS menu.
Is there any method that works ?

Anthony77777 said:
I have 3 i337m running 4.3 original firmware.One is Bell, 1 Rogers, 1 Telus.
I've tried all the methods I could find that include downgrading, rooting etc. I cannot seem to get access to the UMTS menu.
Is there any method that works ?
Click to expand...
Click to collapse
Everything Ihave seen, the service menu is hidden in 4.3... I never was able to get to it after the update... I did unlock my s3 before 4.3 but my s4 never got it done... best you can do now is either buy an unlock code on the net or take it to one of the mall kiosks... lots of the guys that sell cases unlock phones too for around $20

Anthony77777 said:
I have 3 i337m running 4.3 original firmware.One is Bell, 1 Rogers, 1 Telus.
I've tried all the methods I could find that include downgrading, rooting etc. I cannot seem to get access to the UMTS menu.
Is there any method that works ?
Click to expand...
Click to collapse
Did you try specifically flashing a modem from an older version where it had the service menu? (like the old 4.2.2 modem) and did you try flashing an older one and using RegionLock Away?

DeadlySin9 said:
Did you try specifically flashing a modem from an older version where it had the service menu? (like the old 4.2.2 modem) and did you try flashing an older one and using RegionLock Away?
Click to expand...
Click to collapse
+1
Also, the SIM unlock trick does not seem to work on the i337M with the newer MK6 modem. Heck, I even tried it on stock right when I got mine (which was still on MDJ at the time), and it didn't work. But results vary, apparently. Try downgrading to 4.2.2 stock like DeadlySin9 suggested, and see if that will work. If it doesn't, there should be an app out there that can access the hidden Service Menus; I just can't remember the name of it at the moment.

DeadlySin9 said:
Did you try specifically flashing a modem from an older version where it had the service menu? (like the old 4.2.2 modem) and did you try flashing an older one and using RegionLock Away?
Click to expand...
Click to collapse
The device does not allow downgrades to 4.2.2 for any carrier firmware. I tried region lock away on 4.3 with no success.

Anthony77777 said:
The device does not allow downgrades to 4.2.2 for any carrier firmware. I tried region lock away on 4.3 with no success.
Click to expand...
Click to collapse
Your not downgrading the firmware, just the modem. You can flash it in your custom recovery

DeadlySin9 said:
Did you try specifically flashing a modem from an older version where it had the service menu? (like the old 4.2.2 modem) and did you try flashing an older one and using RegionLock Away?
Click to expand...
Click to collapse
jd1639 said:
Your not downgrading the firmware, just the modem. You can flash it in your custom recovery
Click to expand...
Click to collapse
How can I downgrade the modem ?

Anthony77777 said:
How can I downgrade the modem ?
Click to expand...
Click to collapse
Look for the zip file in the development forum and flash that in your recovery.
Here
http://forum.xda-developers.com/showthread.php?p=42589278

jd1639 said:
Look for the zip file in the development forum and flash that in your recovery.
Here
http://forum.xda-developers.com/showthread.php?p=42589278
Click to expand...
Click to collapse
The modem downgrade fails with odin.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!

Anthony77777 said:
The modem downgrade fails with odin.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Do you have a custom recovery or safestrap? I'd flash the zip on there

jd1639 said:
Do you have a custom recovery or safestrap? I'd flash the zip on there
Click to expand...
Click to collapse
I installed the .zip with cwm recovery but when I checked my modem (baseband) it was mk6 modem, so it was unchanged.

Anthony77777 said:
I installed the .zip with cwm recovery but when I checked my modem (baseband) it was mk6 modem, so it was unchanged.
Click to expand...
Click to collapse
I've never been able to get this to work either. Also related, unlocking will remove LTE, permanently.

azuziel said:
I've never been able to get this to work either. Also related, unlocking will remove LTE, permanently.
Click to expand...
Click to collapse
Unlocking shouldn't remove LTE. All you have to do is make sure to correct the APN, as it might change, and flash back to your newer modem afterwards.
Are you sure your ODIN drivers are set up right? Try reinstalling/manually updating the drivers. They never like to work very well. You could also try Mobile ODIN since you have an unlocked bootloader.

stuck in bootloop even after flashing new rom

Hello,
So to start off I had encrypted CyanogenMOd 12.1 nightlies running on my T-Mobile Samsung Galaxy S5 with TWRP 2.8.7 recovery without any problems. I went to reboot and it got stuck in a bootloop, I tried restarting it and same thing. I tried wiping cache/dalvik and same thing. Sometimes it would make it to the "optimizing apps" screen and indefinitely hang on "starting apps", but mostly it gets stuck on the boot animation. I hadn't added or deleted anything prior to this happening. I had tried a number of possible solutions from various threads, none of which solved my issue. (Also, it never asked me to enter my password to startup which it usually did)
I then tried wiping dalvik, system , data, internal storage, and cache and flashing a fresh rom which did not work either. This time the bootloop only ever occurs on the boot animation screen.
What should be my next course of action?

Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)

*Detection* said:
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
Click to expand...
Click to collapse
I'm having trouble getting a stock rom, they keep corrupting at the end of the download and the download speed is throttled. Do you know of a good source to obtain a stock rom that won't take 2+ hours to download?

What model S5 is it?
Eg: Mine is G900F

*Detection* said:
What model S5 is it?
Eg: Mine is G900F
Click to expand...
Click to collapse
G900T

EzStyles said:
G900T
Click to expand...
Click to collapse
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e

*Detection* said:
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
Click to expand...
Click to collapse
Awesome thank you that is working great! Much faster than the download links I have been finding. I will report back shortly with results

Good luck

*Detection* said:
Good luck
Click to expand...
Click to collapse
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?

EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F

*Detection* said:
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
Click to expand...
Click to collapse
100% positive. It's T-Mobile, I have the box with that model number and in download mode it shows product name: SM-G900T
Perhaps the files need to have a specific name in order to flash properly? I've run into that issue when reflashing motherboards
So I tried flashing without the PIT file and it "passed" according to odin but it is just stuck on the "Samsung Galaxy S5 Powered by Android" screen now

Ok, So i tried flashing the rom itself one more time and this time it worked! My phone is back to working now. Or, at least until I reboot again > I'll be back if there's any more issues haha. Thanks again for your help

Same Problem
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?

Cendrez said:
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Click to expand...
Click to collapse
Did you have ODIN and Kies running at the same time? Make sure Kies service is stopped in system before running ODIN

Odin not working how it should

Hi im using a samsung galaxy s7 edge (SM-G935F)(VDF).
And im trying to flash the 8.0.0 stock rom.
but it keeps saying.
<ID:0/003> Odin engine v(ID:3.1207).
.<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i do have the samsung drivers installed and a good usb cable.. and port,
my phone is in odin mode i really dont know anymore,
ive tried 9/10 odin version and all thesame.
Thanks in advance
Edit: I got it to work by using 3.13B version odin, i was in the wrong download mode i got into it using twrp
Edit 2: Nevermind Complete(Write) operation failed.
Edit 3: i dont want to be the guy without the source but i dont im sorry, the best i have is this
G935FXXU2EREM_G935FOJV2ERE8_TUR, thanks everyone for helping me

Go into Developer Options and check OEM Unlock

PixelIsHere said:
Hi im using a samsung galaxy s7 edge (SM-G935F)(VDF).
And im trying to flash the 8.0.0 stock rom.
but it keeps saying.
<ID:0/003> Odin engine v(ID:3.1207).
.<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i do have the samsung drivers installed and a good usb cable.. and port,
my phone is in odin mode i really dont know anymore,
ive tried 9/10 odin version and all thesame.
Thanks in advance
Click to expand...
Click to collapse
Use odin 3.13b from the xda forums
3.12 has no oreo support

pingufanpoy said:
Use odin 3.13b from the xda forums
3.12 has no oreo support
Click to expand...
Click to collapse
Still doesnt work for me for some reason,
i used https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. i supposed that was the right forum.
i tried Odin3 v3.13.1_3B_PatcheD.zip, and got this http://prntscr.com/ke7mdf
i tried Odin3_v3.13.1.zip too and i got thesame result.

PixelIsHere said:
Still doesnt work for me for some reason,
i used https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. i supposed that was the right forum.
i tried Odin3 v3.13.1_3B_PatcheD.zip, and got this http://prntscr.com/ke7mdf
i tried Odin3_v3.13.1.zip too and i got thesame result.
Click to expand...
Click to collapse
is this for all slots all fail?
flash it individually each box

pingufanpoy said:
is this for all slots all fail?
flash it individually each box
Click to expand...
Click to collapse
Oh i actually didnt know that was possible, it seems to get stuck at AP, BL is fine, i suppose the others are fine too
Edit: AP failed
Edit 2: Both CP and CSC succeeded im gonna look for a better AP

I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk

Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
OH thats a very good reason ill download it again

Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
Dammit i had so much hope in that, still thesame error
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3940 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Melwin Jijo said:
I think the downloaded file is corrupted.
Because you may pause and started several times.
Sent from my Lenovo K33a42 using Tapatalk
Click to expand...
Click to collapse
This was the solution
I found a file with the right AP.. atleast im pretty sure its still charging
i dont want to be the guy who doesnt have the sauce, but i dont.
by the time you see this ive edited the post