Hello,
So to start off I had encrypted CyanogenMOd 12.1 nightlies running on my T-Mobile Samsung Galaxy S5 with TWRP 2.8.7 recovery without any problems. I went to reboot and it got stuck in a bootloop, I tried restarting it and same thing. I tried wiping cache/dalvik and same thing. Sometimes it would make it to the "optimizing apps" screen and indefinitely hang on "starting apps", but mostly it gets stuck on the boot animation. I hadn't added or deleted anything prior to this happening. I had tried a number of possible solutions from various threads, none of which solved my issue. (Also, it never asked me to enter my password to startup which it usually did)
I then tried wiping dalvik, system , data, internal storage, and cache and flashing a fresh rom which did not work either. This time the bootloop only ever occurs on the boot animation screen.
What should be my next course of action?
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
*Detection* said:
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
Click to expand...
Click to collapse
I'm having trouble getting a stock rom, they keep corrupting at the end of the download and the download speed is throttled. Do you know of a good source to obtain a stock rom that won't take 2+ hours to download?
What model S5 is it?
Eg: Mine is G900F
*Detection* said:
What model S5 is it?
Eg: Mine is G900F
Click to expand...
Click to collapse
G900T
EzStyles said:
G900T
Click to expand...
Click to collapse
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
*Detection* said:
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
Click to expand...
Click to collapse
Awesome thank you that is working great! Much faster than the download links I have been finding. I will report back shortly with results
Good luck
*Detection* said:
Good luck
Click to expand...
Click to collapse
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
*Detection* said:
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
Click to expand...
Click to collapse
100% positive. It's T-Mobile, I have the box with that model number and in download mode it shows product name: SM-G900T
Perhaps the files need to have a specific name in order to flash properly? I've run into that issue when reflashing motherboards
So I tried flashing without the PIT file and it "passed" according to odin but it is just stuck on the "Samsung Galaxy S5 Powered by Android" screen now
Ok, So i tried flashing the rom itself one more time and this time it worked! My phone is back to working now. Or, at least until I reboot again > I'll be back if there's any more issues haha. Thanks again for your help
Same Problem
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Cendrez said:
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Click to expand...
Click to collapse
Did you have ODIN and Kies running at the same time? Make sure Kies service is stopped in system before running ODIN
Related
softbrick my s4 but still able to access download mode
I have TWRP backups( boot.emmc.win.md5,cache.ext4.win.md5,data.ext4.win.md5,efs.ext4.win.md5,recovery.emmc.win.md5,sd-ext.ext4.win.md5,system.ext4.win.md5)
I got the idea of installing TWRP in download again since it's not booting up in recovery mode
but it's keeps saying FAIL!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
tried changing ports? Try ports that are directly connected into the motherboard
Sent from my GT-I9500 using Tapatalk 4 Beta
Paras Lehana said:
tried changing ports? Try ports that are directly connected into the motherboard
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Is usb debugging enabled on the phone, closed Kies (also in windows tray manager), what odin version are u using (try 3.04 cause 3.07 is buggy),
try downloading TWRP again maybe its corrupted.
terryspanky said:
softbrick my s4 but still able to access download mode
I have TWRP backups( boot.emmc.win.md5,cache.ext4.win.md5,data.ext4.win.md5,efs.ext4.win.md5,recovery.emmc.win.md5,sd-ext.ext4.win.md5,system.ext4.win.md5)
I got the idea of installing TWRP in download again since it's not booting up in recovery mode
but it's keeps saying FAIL!
Removed!!
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Click to expand...
Click to collapse
Do u have a proper root?
Edit : u can try rooting again and then flash recovery
.
gee2012 said:
Is usb debugging enabled on the phone, closed Kies (also in windows tray manager), what odin version are u using (try 3.04 cause 3.07 is buggy),
try downloading TWRP again maybe its corrupted.
Click to expand...
Click to collapse
changing the usb port do the trick.
Now tried to root and install openrecovery-twrp-2.6.0.0-jfltexx/CSB_signed_Fusion3_EUR_0325_V2 from odin and it says pass on all of them.
But when I'm trying to boot up in teamwin, the twrp logo will show up then it will turn black screen, vibrate a moment and automatically restarts to samsung galaxy s4 screen....
I can't seem to make twrm to work...
I think I have messed up my kernel when I install Abyss kernel for gt-I9505 then it bricked after I install I9505XXUBMF4_modems.tar via mobile odin..
any suggestions?
I'm downloading the PDA for my country and It's taking some time to get finished.
Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.
I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?
Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4
Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
If you can be more spesific, u will being helped easily. Which variant/baseband/rom/firmware and etc. And check the attached image which is belongs with @xanthrax :good:
S6 Edge or Edge Plus ?
same problem please help
Im getting the same error message when I try to stock flash my regular s6. I have a G920P, I was told the t mobile G920t root would work, but now when I reboot I get the error "recvoery is not seandroid enforcing", and im stuck on the boot loader screen. I got the t mobile flash from aurtoroot. please help im stuck with a bricked phone.
Also have this error - Here is additional info
Hi, I am having this issue too. It sucks, I feel as if I have lost a limb!
I am not so experienced in this area so I will do my best on info:
RP SWREV: B:3 K:2 S:2 - I presume this is the model info and will assist you guys.
I have attached a screenshot of the error I get in Odin. Any help would be greatly appreciated. I am a little worried as this issue appears to be virtually unknown on the internet!
I am a first time poster so having issues sharing link.... hope this works: ht tp://tinypic.com/r/2e0mqu0/9
Thanks,
Adam
Also i am on a Galaxy S6.
r3dfour said:
Im getting the same error message when I try to stock flash my regular s6. I have a G920P, I was told the t mobile G920t root would work, but now when I reboot I get the error "recvoery is not seandroid enforcing", and im stuck on the boot loader screen. I got the t mobile flash from aurtoroot. please help im stuck with a bricked phone.
Click to expand...
Click to collapse
What are firmware are you flashing? You say you have a G920P this is the G928 S6Edge Plus thread
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.
---------- Post added at 01:33 AM ---------- Previous post was at 01:31 AM ----------
fallaize said:
Hi, I am having this issue too. It sucks, I feel as if I have lost a limb!
I am not so experienced in this area so I will do my best on info:
RP SWREV: B:3 K:2 S:2 - I presume this is the model info and will assist you guys.
I have attached a screenshot of the error I get in Odin. Any help would be greatly appreciated. I am a little worried as this issue appears to be virtually unknown on the internet!
I am a first time poster so having issues sharing link.... hope this works: ht tp://tinypic.com/r/2e0mqu0/9
Thanks,
Adam
Also i am on a Galaxy S6.
Click to expand...
Click to collapse
Make sure you have the proper firmware this is the G928 S6Edge Plus thread. Not G920
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.
---------- Post added at 01:39 AM ---------- Previous post was at 01:33 AM ----------
agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
If you are stuck in download mode you're not bricked.
Make sure you have the proper firmware downloaded on your computer. Use Odin 3.10.06 Using winzip or similar tool unzip the firmware and you'll see four files.
Open Odin you'll see AP BL CP and CSC place the corresponding files you've unzipped from firmware into those slots and hit start button you should be up and running
agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.
Hi s7freak, could you please make a screenshot of the four files in odin? I cant find them.
Thank you
Beni
derboiistfly said:
Hi s7freak, could you please make a screenshot of the four files in odin? I cant find them.
Thank you
Beni
Click to expand...
Click to collapse
If you download the official firmware I was able to use the official firmware in the AP slot by itself
"All we know is...He's called the Stig!"
Sent from my Gorgeous G935F
I'm having this exact problem.
I am on a galaxy s6 edge, G925T.
I tried wiping the system and flashing again, nothing worked. I've tried flashing cyanogenmod, and stock rom, but they both give this same error.
The thing that initially broke the phone was trying to use CF-autoroot, and it put it into a bootloop. i was able to install TWRP but that's as far as i've gotten.
I was trying to copy a cyanogenmod zip file onto my phone to install from TWRP, but every time I tried, the transfer failed.
Check Fail Device 3 binary 1
Hi, I need Help with my Samsung Galaxy A7 2018 (SM-A750FN/DS)
I have a frp lock and a oem lock, I flashed the Combination-file on the Phone but it is the U3.
I can not flash any firmeware or combination file.
on the Screen from the Phone, Check fail (Bootloader) Device 3, Binary 1.
Sorry but can anyone Help me?:crying:
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
Hi,
download a stock firmware from updato. In Odin select all of the files. For CSC file use the normal CSC file (not HOME_CSC).
In addition, select re-partition and flash.
Odin gets the PIT information from the CSC file.
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ok so I tried that and still this keeps coming up I read something about that the phone is in read only mode do it cant write anything to it not even odin I flashed the wrong twrp it wasn't for my international phone and now I cant do anything with it it don't even have a recovery on it now please help and thank you for the idea tho but didn't work
I tried it again and this is coming up now
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
and now this I don't know why this is going on its killing me
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
tried the new odin and this happened
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Have you downloaded the correct firmware from updato.com? If you have g935f you need a 'f' version of the firmware.
Sorry, I have no further idea.
flash again and use your country home CSC i did that and works like a charm
I have downloaded the g935f and the uk csc BTU and still not working
Maybe you try a different usb cable and flash on another pc?
ive tried everything the phone has put itself in read only mode I need to know how to do a boot trap install or something if anyone know how to do that
Have you tried with re partition and NAND erase all ticked in odin? If not, try it. And please use latest version of odin. 3.11 or above.
ya ive tried everything I can think of it just cant get pass the pit file check an then my phone restart to the galaxy s7 edge screen an says on that I flashed twrp-3.0.2-0-hero2qltechn.img and it was that, that messed my phone up coz it was the wrong one I was ment to flash twrp-3.0.2-4-hero2lte.img and then I went to flash the the right one it said the I didn't have a pit partition so I tried the latest firmware for my phone (UK EVR an the pit files) I also used just the csc files but everything ive tried has gave me the above errors ive ready messed up this time
You can download the .pit file for your device: HERE
thank you joku1981 but I already have one but ill try this one
can someone tell me how to use the pit file tab bit coz I still cant get it to work still all the above odin errors
hi
have u fixed ur peoblem i have same
Did u try a restore to factory firmware with smartswitch? With ur IMEI and SN maybe it works
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
cwis said:
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
Click to expand...
Click to collapse
if you are using a prince cosmey or custom odin with orange text on left of apps header download an official odin assuming your trying to flash a stock firmware. should fix custom odin only flashes root stuffs
It worked. Now I'm debating rooting again but the lag is still difficult.
Thank you for the help.
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Whicho_castillo said:
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Click to expand...
Click to collapse
Samsung Odin 3.13.1
instrumentaly said:
Samsung Odin 3.13.1
Click to expand...
Click to collapse
Thank you so much dude, it actually worked, Thank you so much.