Database Users

[Q] Samsung Galaxy S4 Odin Modem Flashing Issue

I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!

Also...
Also the solution on
http://forum.xda-developers.com/showthread.php?p=42418958
will not work for me because there is no .zip version of an LTE modem.

Is there any update on this? I can't figure this out for the life of me despite all the resources on these forums.

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Dude. I have the EXACT same problem as you, did you end up managing trying to find a fix for it?
I get the exact same errors exactly as you have listed. I'm also on Foxhound 3.4.

CuriosityBrah said:
Dude. I have the EXACT same problem as you, did you end up managing trying to find a fix for it?
I get the exact same errors exactly as you have listed. I'm also on Foxhound 3.4.
Click to expand...
Click to collapse
I can't find a fix. i gave up and went to paranoid android. the signal was too annoying for me to just deal with. still waiting for a recovery flashable lte modem for the s4. I bet that would make life so much easier.

Pickpoket said:
I can't find a fix. i gave up and went to paranoid android. the signal was too annoying for me to just deal with. still waiting for a recovery flashable lte modem for the s4. I bet that would make life so much easier.
Click to expand...
Click to collapse
I'm having this same exact problem wanting to replace a modem for fox hound diamond dogs 3.5. I've looked everywhere and followed all of the procedures, yet still no luck!

Bump

Temor said:
Bump
Click to expand...
Click to collapse
same here

zgarske said:
I'm having this same exact problem wanting to replace a modem for fox hound diamond dogs 3.5. I've looked everywhere and followed all of the procedures, yet still no luck!
Click to expand...
Click to collapse
Same here. I have Foxhound Diamond Dogs 3.6 and want to upgrade to the new 4.4 version. Getting the exact same error message that OP posted.

First time I post something useful and cant get help.
Since we are on our own, to those following the post.
Can you post...
Root procedure you used?
If you restored a back up, and are still facing the same issue?
what your "About Phone" reads under baseband after flashing a modem.
and if were all on carriers in US trying to flash a rom meant for international devices...<---this may be my issue.
Can you flash other KitKat roms?
"I flashed the Google KitKat edition, and it worked fine for a day. Rebooted my phone, started getting FC's by the second."
But yeah please just go through what you have done with your phone and the outcomes before this issue arose for you.
Some peer to peer research may extract the data we need to figure this fiddle-stick out.

I'm having the same issue on my Galaxy S4 Active with a locked bootloader. My IMEI got corrupted after an update. I'm trying to reflash the modem to fix the issue, but I can't get past the fail. Any solutions to this yet?

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Hi Buddys, I saw ur post and made an account to help u guys out. It can sound silly, but charge fully your battery and when its done, take it out for 5 minutes and re-odin it. Dont forget to uncheck to auto-reboot and hopefully it should be fine. No need for a beer , got enuff issues sober...

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Had the same freakin issue yesterday guys, try this , tried to flash the albe rom. This link worked very fine for my m919
http://forum.xda-developers.com/galaxy-s4-tmobile/general/i9505oa7tw5-0leak-t3045729

Cannot flash stock through ODIN

Okay guys, I have screwed up...
I will try to explain my situation as thoroughly as possible:
So there was a game promotion that if you had an S6/EDGE, you would get free content in that game. The only way (to me) that I could get it was change my ro.device.model number to appropriate S6 model number to fake having an S6/EDGE. I rooted my Note 4 (SM-N910P) using chainfire's auto-root. Everything went fine inthe rooting process. I downloaded the application that changes my build.prop (In play store it is titled "build.prop editor"). So I changed the ro.device.model to SM-G920F. I restarted my device so the game could notice that I "had" G6/EDGE. I was stuck in a bootloop. All I see is the Samsung logo. I can access download mode (power home voldown) and recovery (power home volup). I was freaking out that I was stuck in a bootloop. Then someone else in the reddit thread (reddit dot com/r/hearthstone/comments/3dkwew/how_to_get_the_samsung_s6_3_packs_and_card_back) said that he tried it on his Note 4 and he also got the same bootloop but he fixed it by reverting back through stock. I downloaded stock Note 4 4.4.4 firmware and flashed....
here are the logs: <ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone: UDC start
SW Rev Check FAIL: [aboot] Fuused 2 > Binary 1
[1] eMMC write fail: ABOOT
I am screwed, aren't I?

savev1 said:
Okay guys, I have screwed up...
I will try to explain my situation as thoroughly as possible:
So there was a game promotion that if you had an S6/EDGE, you would get free content in that game. The only way (to me) that I could get it was change my ro.device.model number to appropriate S6 model number to fake having an S6/EDGE. I rooted my Note 4 (SM-N910P) using chainfire's auto-root. Everything went fine inthe rooting process. I downloaded the application that changes my build.prop (In play store it is titled "build.prop editor"). So I changed the ro.device.model to SM-G920F. I restarted my device so the game could notice that I "had" G6/EDGE. I was stuck in a bootloop. All I see is the Samsung logo. I can access download mode (power home voldown) and recovery (power home volup). I was freaking out that I was stuck in a bootloop. Then someone else in the reddit thread (reddit dot com/r/hearthstone/comments/3dkwew/how_to_get_the_samsung_s6_3_packs_and_card_back) said that he tried it on his Note 4 and he also got the same bootloop but he fixed it by reverting back through stock. I downloaded stock Note 4 4.4.4 firmware and flashed....
here are the logs: <ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone: UDC start
SW Rev Check FAIL: [aboot] Fuused 2 > Binary 1
[1] eMMC write fail: ABOOT
I am screwed, aren't I?
Click to expand...
Click to collapse
try download diffrent firmware
try wipe data/cache (volum up+power button +home button) if you cant access it .try rooting your device and then install recovery then wipe(cache data) and try flashing stocks firmware again
it may also be bad cable try diffrent one
reinstall kies 3(after unistalling it first)
use diffrent odin (3.04 ECT)
and try kikat firmware i believe its just firmware issue (try russian kitkat if your device varient is supported )

savev1 said:
Okay guys, I have screwed up...
I will try to explain my situation as thoroughly as possible:
here are the logs: <ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone: UDC start
SW Rev Check FAIL: [aboot] Fuused 2 > Binary 1
[1] eMMC write fail: ABOOT
I am screwed, aren't I?
Click to expand...
Click to collapse
No youre not screwed(shouldnt be).
And No, dont continue to flash KitKat firmware or youre going to be wasting time and continually disappointed, no matter how many times you download it.
Once you get to a certain bootloader, youre not able to downgrade to prior(kitkat in this case) bootloaders. Flash the LATEST stock.tar through Odin and start all over.

xxSTARBUCKSxx said:
No youre not screwed(shouldnt be).
And No, dont continue to flash KitKat firmware or youre going to be wasting time and continually disappointed, no matter how many times you download it.
Once you get to a certain bootloader, youre not able to downgrade to prior(kitkat in this case) bootloaders. Flash the LATEST stock.tar through Odin and start all over.
Click to expand...
Click to collapse
Ummm, okay could you possibly link my to the current tars? I have tried flashing everything from kitkat to lollipop. (I was originally on the BOB7 lollipop build).)
From what I've read (hence why I am scared) is that my eMMC chip is broken and cannot be written to...

savev1 said:
Ummm, okay could you possibly link my to the current tars? I have tried flashing everything from kitkat to lollipop. (I was originally on the BOB7 lollipop build).)
From what I've read (hence why I am scared) is that my eMMC chip is broken and cannot be written to...
Click to expand...
Click to collapse
Well, lets hope that isnt the case and stick to what we do know. That message you received points to one thing, Trying to Odin a .tar firmware that contains an older bootloader that people with OE1 and up bootloaders cannot downgrade to.
OF5 Stock tar.
http://forum.xda-developers.com/note-4-sprint/general/of5-tar-t3158006
FYI SM-N910P Forum
http://forum.xda-developers.com/note-4-sprint

xxSTARBUCKSxx said:
Well, lets hope that isnt the case and stick to what we do know. That message you received points to one thing, Trying to Odin a .tar firmware that contains an older bootloader that people with OE1 and up bootloaders cannot downgrade to.
OF5 Stock tar.
http://forum.xda-developers.com/note-4-sprint/general/of5-tar-t3158006
FYI SM-N910P Forum
http://forum.xda-developers.com/note-4-sprint
Click to expand...
Click to collapse
It worked! It worked! I pressed thanks bro ^.^

savev1 said:
It worked! It worked! I pressed thanks bro ^.^
Click to expand...
Click to collapse
Lol. Np bro. Glad it worked. Thats what the community is here for.
Get your phone situated and the way you like it (launchers or what have you) and make a backup in recovery and youll be good to go.

Note 4 sm-n910f
savev1 said:
It worked! It worked! I pressed thanks bro ^.^
Click to expand...
Click to collapse
I've been had the same problem having this error
----------------------
UDC start
SW Rev Check FAIL: [aboot] Fuused 2 > Binary 1
[1] eMMC write fail: ABOOT
-----------------------
and I badly need to flash to stock since I am using custom and having problem with my sim not being detected .
but i just cant seem to get it flashed once more like i did the first try with a stock rom ?
would you suggest me to download several stock rom in sammobile and try all.

I am having the same problem with N910W8 getting emmc write fail

stuck in bootloop even after flashing new rom

Hello,
So to start off I had encrypted CyanogenMOd 12.1 nightlies running on my T-Mobile Samsung Galaxy S5 with TWRP 2.8.7 recovery without any problems. I went to reboot and it got stuck in a bootloop, I tried restarting it and same thing. I tried wiping cache/dalvik and same thing. Sometimes it would make it to the "optimizing apps" screen and indefinitely hang on "starting apps", but mostly it gets stuck on the boot animation. I hadn't added or deleted anything prior to this happening. I had tried a number of possible solutions from various threads, none of which solved my issue. (Also, it never asked me to enter my password to startup which it usually did)
I then tried wiping dalvik, system , data, internal storage, and cache and flashing a fresh rom which did not work either. This time the bootloop only ever occurs on the boot animation screen.
What should be my next course of action?

Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)

*Detection* said:
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
Click to expand...
Click to collapse
I'm having trouble getting a stock rom, they keep corrupting at the end of the download and the download speed is throttled. Do you know of a good source to obtain a stock rom that won't take 2+ hours to download?

What model S5 is it?
Eg: Mine is G900F

*Detection* said:
What model S5 is it?
Eg: Mine is G900F
Click to expand...
Click to collapse
G900T

EzStyles said:
G900T
Click to expand...
Click to collapse
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e

*Detection* said:
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
Click to expand...
Click to collapse
Awesome thank you that is working great! Much faster than the download links I have been finding. I will report back shortly with results

Good luck

*Detection* said:
Good luck
Click to expand...
Click to collapse
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?

EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F

*Detection* said:
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
Click to expand...
Click to collapse
100% positive. It's T-Mobile, I have the box with that model number and in download mode it shows product name: SM-G900T
Perhaps the files need to have a specific name in order to flash properly? I've run into that issue when reflashing motherboards
So I tried flashing without the PIT file and it "passed" according to odin but it is just stuck on the "Samsung Galaxy S5 Powered by Android" screen now

Ok, So i tried flashing the rom itself one more time and this time it worked! My phone is back to working now. Or, at least until I reboot again > I'll be back if there's any more issues haha. Thanks again for your help

Same Problem
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?

Cendrez said:
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Click to expand...
Click to collapse
Did you have ODIN and Kies running at the same time? Make sure Kies service is stopped in system before running ODIN

s7 edge 935f jammed on powered by android screen

Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated

Help Need. Flash TWRP Custom Rom to Samsung Note 4 (SM-N910F)

Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Here are my steps.
1. Factory Reset Wipe out all Data
2. Go Back into the phone and enabled USB Debugging.
3. Go into Recovery (Down + Home + Power)
4. Odin Flash with Auto-reboot off (TWRP -twrp-3.6.2_9-0-trlte.img)
5. I got error from odin
--------------
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 13 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
--------------
It keeps failing. with the error log above.
I tried a couple of TWRP version, it fails with same error.
I tried a couple of Odin version, it fails with same error.
Is the bootloader lock ? Please help and shine me a light with this lost soul.
Thank you very much.

mixtmxim said:
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Click to expand...
Click to collapse
afaik Odin can only flash tar or tar.md5 files so choose
twrp-3.6.2_9-0-trlte.img.tar.​Personally on that old device I use Odin 3.09 as I somewhere read it suits better.
mixtmxim said:
......
Is the bootloader lock ? Please help and shine me a light with this lost soul.....
Click to expand...
Click to collapse
No. Not on this old device (at least not on my N910F)

kit kat or marshmallow?