Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated
Related
I am trying to use CF Auto-Root for my GS-4 i9500. I power up my phone in "download mode" but as soon as i do it already says 'Downloading... Do not turn on target!!'. I waited for a while (watched a tv show so probably 40-45 min) and nothing changed. The upper left says; Odin mode, ..., Write Protection: Enabled, eMMC BURST MODE enabled. I turn it off and back on in download mode (still says 'Downloading...'), load up the binary, connect the phone to my comp (odin says 'Added!!' and recognizes the COM port it is connected to), and click start. About half the time i get:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried 4 different USB ports and 3 different cables. I can simply click restart in odin and try again when i get this error
The other half i get:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
in the upper left on my phone I get, in red; start [224, 1440], secure magicode check fail : recovery. This requires me to reboot the phone for another attempt. I have clicked the PIT button in odin and there are no files there.
I have found some similar threads for the first failure but they all seem to require re-partitioning and re-make (?) the PIT file which is apparently "extremely risky". As for the second failure, I found several threads with a similar failure but they were regarding going back to stock and seemed to be caused by a bad recovery image?? On the up side my phone will still boot into factory software just fine, but I would really like to figure out what I'm f-ing up.
What am I doing wrong?
Thanks in advance for any help
If I were you, I would look for a custom recovery and flash this. I use Philz Touch Recovery, you can root it from it and it works perfect.
Links here: http://d-h.st/users/philz_touch/?fld_id=16644#files
flash it in Odin using AP.
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul
Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
IceOnMyBraiN said:
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
Click to expand...
Click to collapse
Simply odin back to stock.
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
IceOnMyBraiN said:
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
Click to expand...
Click to collapse
First make sure that the firmware is for your phone, secondly uninstall Samsung Kies.
Reboot your PC
Then install Samsung USB drivers:
https://www.androidfilehost.com/?fid=24052804347849220
Then run Odin as admin and make sure no security software is interfering, temporarily switching it off might be advised.
Odin v3.10.7:
https://www.androidfilehost.com/?fid=24052804347851815
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button.
I tried,It didn't worked..but I fixed it by downloading erobot rom and putting it into my sd card and then flash it trough twrp,thank you for the answer and the help tho thread closed ^_^
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
For anyone who has the same problem as me, here is a fix i found after almost giving up,
Go to Sammobile.com or Shell.BoxWares.com and download the latest firmware for your phone model, even if it isn't your country, still download and flash it, i live in ireland, so i should have 3IE Firmware but i downloaded the Indonesian firmware and it flashed without a single hassle
Its due to bootloader issue
xNexeon said:
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
Click to expand...
Click to collapse
You are trying to flash a old bootloader on top of new bootloader version, downgrading is not allowed AFAIK
There is a simple reason for this. If you came from TWRP as "reboot to download", this creates the problem. Turn off the phone. Go to download mode with Vol_Down+Bixby+Power and then press Vol_Up button. When I enter download mode like this, it flashes without any problems.