Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul
Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!
Related
Running Samsung-SGH-I337 Galaxy S4 AT&T with 4.2.2, rooted and encrypted of course, I've been trying to flash a custom recovery such as CWM via ROM Manager and also TWRP via GooManager as well as other attempts to get the custom recovery working. When ROM Manager or GooManager tries to set things up it says it works, but when I reboot into recovery mode it actually goes into Download/Odin mode instead. Even if I use the volume up method of getting into recovery mode (download mode is volume down) it goes to download mode instead. I've even rebooted to recovery mode via adb, still goes to download instead. What?
Try flashing it with Odin.
I haven't found a TWRP method that works for the ATT I337 via ODIN. Not sure how that would make a difference either though.
i dont about twrp why not use Philz Touch CWM ?
i can send your a link, pm me if you're interested
I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Parad0x86 said:
I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
have you tried other versions of Odin?
Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord
XxLordxX said:
Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord
Click to expand...
Click to collapse
Thanks, I didn't realize I had to look at "All" forums to find my device's forum since the default is just "Top Devices" and didn't see it. If this can be moved please do.
I've been reading and from what I've gathered, since I have MF3 firmware my bootloader is locked down and my only bet is to use Safestrap. I'll be looking into this.
Edit: Also I use encryption which is apparently not a good idea with Safestrap so I'm probably SOL. Awesome.
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
IceOnMyBraiN said:
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
Click to expand...
Click to collapse
Simply odin back to stock.
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
IceOnMyBraiN said:
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
Click to expand...
Click to collapse
First make sure that the firmware is for your phone, secondly uninstall Samsung Kies.
Reboot your PC
Then install Samsung USB drivers:
https://www.androidfilehost.com/?fid=24052804347849220
Then run Odin as admin and make sure no security software is interfering, temporarily switching it off might be advised.
Odin v3.10.7:
https://www.androidfilehost.com/?fid=24052804347851815
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button.
I tried,It didn't worked..but I fixed it by downloading erobot rom and putting it into my sd card and then flash it trough twrp,thank you for the answer and the help tho thread closed ^_^
Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Here are my steps.
1. Factory Reset Wipe out all Data
2. Go Back into the phone and enabled USB Debugging.
3. Go into Recovery (Down + Home + Power)
4. Odin Flash with Auto-reboot off (TWRP -twrp-3.6.2_9-0-trlte.img)
5. I got error from odin
--------------
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 13 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
--------------
It keeps failing. with the error log above.
I tried a couple of TWRP version, it fails with same error.
I tried a couple of Odin version, it fails with same error.
Is the bootloader lock ? Please help and shine me a light with this lost soul.
Thank you very much.
mixtmxim said:
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Click to expand...
Click to collapse
afaik Odin can only flash tar or tar.md5 files so choose
twrp-3.6.2_9-0-trlte.img.tar.​Personally on that old device I use Odin 3.09 as I somewhere read it suits better.
mixtmxim said:
......
Is the bootloader lock ? Please help and shine me a light with this lost soul.....
Click to expand...
Click to collapse
No. Not on this old device (at least not on my N910F)
kit kat or marshmallow?