So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
IceOnMyBraiN said:
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
Click to expand...
Click to collapse
Simply odin back to stock.
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
IceOnMyBraiN said:
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
Click to expand...
Click to collapse
First make sure that the firmware is for your phone, secondly uninstall Samsung Kies.
Reboot your PC
Then install Samsung USB drivers:
https://www.androidfilehost.com/?fid=24052804347849220
Then run Odin as admin and make sure no security software is interfering, temporarily switching it off might be advised.
Odin v3.10.7:
https://www.androidfilehost.com/?fid=24052804347851815
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button.
I tried,It didn't worked..but I fixed it by downloading erobot rom and putting it into my sd card and then flash it trough twrp,thank you for the answer and the help tho thread closed ^_^
Related
I am trying to use CF Auto-Root for my GS-4 i9500. I power up my phone in "download mode" but as soon as i do it already says 'Downloading... Do not turn on target!!'. I waited for a while (watched a tv show so probably 40-45 min) and nothing changed. The upper left says; Odin mode, ..., Write Protection: Enabled, eMMC BURST MODE enabled. I turn it off and back on in download mode (still says 'Downloading...'), load up the binary, connect the phone to my comp (odin says 'Added!!' and recognizes the COM port it is connected to), and click start. About half the time i get:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried 4 different USB ports and 3 different cables. I can simply click restart in odin and try again when i get this error
The other half i get:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
in the upper left on my phone I get, in red; start [224, 1440], secure magicode check fail : recovery. This requires me to reboot the phone for another attempt. I have clicked the PIT button in odin and there are no files there.
I have found some similar threads for the first failure but they all seem to require re-partitioning and re-make (?) the PIT file which is apparently "extremely risky". As for the second failure, I found several threads with a similar failure but they were regarding going back to stock and seemed to be caused by a bad recovery image?? On the up side my phone will still boot into factory software just fine, but I would really like to figure out what I'm f-ing up.
What am I doing wrong?
Thanks in advance for any help
If I were you, I would look for a custom recovery and flash this. I use Philz Touch Recovery, you can root it from it and it works perfect.
Links here: http://d-h.st/users/philz_touch/?fld_id=16644#files
flash it in Odin using AP.
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
I flash twrp on my phone using odin:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
but after entering to recovery mode it show message:
Installing system update ...
and after 10 seconds it show message:
no Commands.
then bring default Android Recovery screen instead of twrp.
mmta41 said:
I flash twrp on my phone using odin:
but after entering to recovery mode it show message:
Installing system update ...
and after 10 seconds it show message:
no Commands.
then bring default Android Recovery screen instead of twrp.
Click to expand...
Click to collapse
I realized that this happened when `auto-reboot` option is enable . uncheck `auto-reboot` option remove and place again battery then start in recovery mode works for me.
Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Here are my steps.
1. Factory Reset Wipe out all Data
2. Go Back into the phone and enabled USB Debugging.
3. Go into Recovery (Down + Home + Power)
4. Odin Flash with Auto-reboot off (TWRP -twrp-3.6.2_9-0-trlte.img)
5. I got error from odin
--------------
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 13 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
--------------
It keeps failing. with the error log above.
I tried a couple of TWRP version, it fails with same error.
I tried a couple of Odin version, it fails with same error.
Is the bootloader lock ? Please help and shine me a light with this lost soul.
Thank you very much.
mixtmxim said:
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Click to expand...
Click to collapse
afaik Odin can only flash tar or tar.md5 files so choose
twrp-3.6.2_9-0-trlte.img.tar.​Personally on that old device I use Odin 3.09 as I somewhere read it suits better.
mixtmxim said:
......
Is the bootloader lock ? Please help and shine me a light with this lost soul.....
Click to expand...
Click to collapse
No. Not on this old device (at least not on my N910F)
kit kat or marshmallow?