Running Samsung-SGH-I337 Galaxy S4 AT&T with 4.2.2, rooted and encrypted of course, I've been trying to flash a custom recovery such as CWM via ROM Manager and also TWRP via GooManager as well as other attempts to get the custom recovery working. When ROM Manager or GooManager tries to set things up it says it works, but when I reboot into recovery mode it actually goes into Download/Odin mode instead. Even if I use the volume up method of getting into recovery mode (download mode is volume down) it goes to download mode instead. I've even rebooted to recovery mode via adb, still goes to download instead. What?
Try flashing it with Odin.
I haven't found a TWRP method that works for the ATT I337 via ODIN. Not sure how that would make a difference either though.
i dont about twrp why not use Philz Touch CWM ?
i can send your a link, pm me if you're interested
I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Parad0x86 said:
I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
have you tried other versions of Odin?
Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord
XxLordxX said:
Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord
Click to expand...
Click to collapse
Thanks, I didn't realize I had to look at "All" forums to find my device's forum since the default is just "Top Devices" and didn't see it. If this can be moved please do.
I've been reading and from what I've gathered, since I have MF3 firmware my bootloader is locked down and my only bet is to use Safestrap. I'll be looking into this.
Edit: Also I use encryption which is apparently not a good idea with Safestrap so I'm probably SOL. Awesome.
Related
I have a Galaxy Note 3 SM-N9005 running stock Android 4.3 rooted and I cannot for the life of me figure out how to properly install TWRP. I booted into download mode, loaded up Odin3, and flashed openrecovery-twrp-2.6.3.0-hlte.img.tar under "PDA" but it failed.
I use to install TWRP easily through goomanager, but it doesn't seem to work on the Note 3.
How do I go with installing TWRP on N9005 running rooted stock 4.3?
TWRP Manager
Try to flash img via TWRP Manager
verny94 said:
Try to flash img via TWRP Manager
Click to expand...
Click to collapse
Downloaded the .img and selected it in the app. It tells me to choose a device but N9005 doesn't appear in the list.
Mine won't flash in Odin
Running Stock 4.3 rooted
Attempting to flash "openrecovery-twrp-2.6.3.0-hlte.img.tar" with PDA
Galaxy Note 3 N9005 in Download mode
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At the first of all you need Flash CWM via Odin and try to flash TWRP. If not ->
Try to flash Philz Touch in zip and via PT flash TWRP in zip.
Edit: Newest is 2.7.0.0
Colton127 said:
Mine won't flash in Odin
Running Stock 4.3 rooted
Attempting to flash "openrecovery-twrp-2.6.3.0-hlte.img.tar" with PDA
Galaxy Note 3 N9005 in Download mode
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to use Odin 3.0.7/3.0.9 if you used the old one. If not I could also recommend philz touch recovery... looks and works pretty nice
Colton127 said:
Mine won't flash in Odin
Running Stock 4.3 rooted
Attempting to flash "openrecovery-twrp-2.6.3.0-hlte.img.tar" with PDA
Galaxy Note 3 N9005 in Download mode
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
why don't you try the latest TWRP, and choose for the android 4.3 one.
by right it should work. You can use odin any version, but for me personally I preferred to use 3.0.9.
I get this error:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried installing TWRP via the manager app and now my phone will only boot into download mode. Any help available?
Fail auth indicates that you are flashing a firmware that has a lower version of the boot loader than the one on the phone.
http://forum.xda-developers.com/showthread.php?t=2926642
When the I try to flash my phone with odin, I end up getting the same error code. Is there anyway I can reflash it to stock.
My phone is not working at all. I have no clue what I did. I tried to use kies to get me to stock but it gave me an error and now I have a "Firmware upgrade encountered an issue." It is stuck at download mode. Can someone help with this.
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul
Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
IceOnMyBraiN said:
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
Click to expand...
Click to collapse
Simply odin back to stock.
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
IceOnMyBraiN said:
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
Click to expand...
Click to collapse
First make sure that the firmware is for your phone, secondly uninstall Samsung Kies.
Reboot your PC
Then install Samsung USB drivers:
https://www.androidfilehost.com/?fid=24052804347849220
Then run Odin as admin and make sure no security software is interfering, temporarily switching it off might be advised.
Odin v3.10.7:
https://www.androidfilehost.com/?fid=24052804347851815
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button.
I tried,It didn't worked..but I fixed it by downloading erobot rom and putting it into my sd card and then flash it trough twrp,thank you for the answer and the help tho thread closed ^_^