Please help me! My phone stays in download mode with the following messages appearing on screen:
Could not do a normal boot.
Odin Mode.
Product Mode: SM-G900F
Current Binary: Custom
System Status: Custom
Reactivation Lock: Off
Knox Warranty Void: 0x1(4)
Secure Boot: Enable
Ap SWREV: S1,T1,R1,A1, P1
Secure Download: Enable
UDC START
Flash a stock ROM with ODIN
If your first thought after a "brick" isn't "where did I store the tar for my phone?" you should probably read on how to use Odin to repair your phone and not flash things on it again...
Related
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.
WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:
When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting
Try turning of your reactivation lock.
Reactivation lock would be my guess. It stops a lot of people until they turn it off.
Hello guys, ever since I bought my phone I sometimes have this error "sbl1 partition doesn't exist" pressing power button for 7 seconds reboots and fixes it, but problem is, I'm about to sell the phone and the owner might think I'm cheating him if it ever happens to him, so does anyone have an idea of how to fix this?
Full error:
boot recovery mode
check boot partitions. .
sbl1 partition doesn't exist
odin mode
product name: sm-g900f
current binary: custom
sytem status: custom
reactivation lock(kk): off
knox warranty void: 0x1 (0)
qualcomm secureboot: enable (csb)
rp swrev:**s1,**t1,**r1,**a1,**p1
secure download :**enable
udc start
Flash a stock ROM with ODIN
Latest G900F (United Kingdom) Lollipop ROM
Code:
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
So long story short, I screwed up and tried to install TWRP on my Verizon GS5. I realize now that you need to install Safestrap on the Verizon GS5 and that TWRP doesn't work.
The phone is now stuck trying to boot into recovery mode and failing.
When trying to boot, the first screen says:
Code:
RECOVERY BOOTING
SYS REV CHECK FAIL: No version
SECURE: SECURE VERSION failure (recovery.img)
The second screen is the yellow triangle telling me that "System software not authorized by Verizon..."
Code:
SECURE FAIL: RECOVERY
When I put it into download mode it says:
Code:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Is there any way to fix this? Do I need to use Odin to put a new firmware on the phone?