Database Users

[Q] Stuck in ODIN mode

I have the following problem and no matter what I try I can't get it to boot normaly.
The device is a SM-N9006 which was rooted with RDLV and MJ3 firmware. I put echoe rom on it and it was working fine.
A few days ago I wanted to update the firmware, so I downloaded the new echoe rom which installed through cwm nicely but after booting into it it kept hanging (not responding). Even the initial configuration had to be done in 4-5 parts because of the restarts that needed to bring it back to life.
So I decided to Flash a Stock firmware on it. Used N9006ZCUENF3_N9006CHNENF3_CHN in Odin, After restart the phone surprised me with the message:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, P1
WRITE PROTECTION: Enable
At this time also didnt work so whatever I tried to boot I ended up at this message. Tried to install several CWM versions which didnt help but after installing Philz Recovery, I could get into recovery but still no luck in booting normaly.
Tried flashing N9005 firmwares which failed in Odin (which worked before).
The only stock firmwares I can use now are the N9006 ones but no matter which one I try nothing lets me boot normaly.
Tried the Download Mode entry - Cancel method, the battery, SIM takeout method. Did several data, cache, dalvik deletion, nothing helps.
Please help what should I do?

[Q] Samsung galaxy S4 gt-i9506 Could not do normal boot ODIN mode

hey everyone.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
last but not least. does this means my warranty wont work?

i9506 S4 Unable to recover, stuck in DL Odin mode

Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.

Need urgent assistance on rooting galaxy s5 sm900f

WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:

When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting

Try turning of your reactivation lock.

Reactivation lock would be my guess. It stops a lot of people until they turn it off.

Note 4 N910T, Need help please. It says firmware update encountered an issue.

Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....

dwaynelegg said:
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
Click to expand...
Click to collapse
PM me...I found a fix for this.