WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:
When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting
Try turning of your reactivation lock.
Reactivation lock would be my guess. It stops a lot of people until they turn it off.
Related
hey everyone.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
last but not least. does this means my warranty wont work?
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
Please help me! My phone stays in download mode with the following messages appearing on screen:
Could not do a normal boot.
Odin Mode.
Product Mode: SM-G900F
Current Binary: Custom
System Status: Custom
Reactivation Lock: Off
Knox Warranty Void: 0x1(4)
Secure Boot: Enable
Ap SWREV: S1,T1,R1,A1, P1
Secure Download: Enable
UDC START
Flash a stock ROM with ODIN
If your first thought after a "brick" isn't "where did I store the tar for my phone?" you should probably read on how to use Odin to repair your phone and not flash things on it again...
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
dwaynelegg said:
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
Click to expand...
Click to collapse
PM me...I found a fix for this.
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465).
Rooted S5 with 4.4.2 had some problems, random freezing etc. Then it suddenly got stuck in a recovery loop.
I managed to save all important data by flashing TWRP, and then wiped it and flashed 4.4.2 on it again.
I used the phone for about a week, then it suddenly started causing problems, it wouldn't charge anymore when it is booted up. I then tried to wipe it all again and restart the phone but it didnt help. I then tried flashing the newest Android version for the S5 on it. 6.0.1. and flashed the CF-Auto-Root file.
It worked but same problems: It doesn't charge while it's on. When I start it up it shows:
Set Warranty bit : kernel
When I turn it off and connect it to the power it will only show the battery sign with the flash(lightning sign) inside of it, then restart, then show it again, then restart, until infinity. I have even bought a new battery, this is has got to be some weird software thing.
When I enter into download/Odin mode it shows:
PRODUCT NAME: SM-G900F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Is there anything I can do to return to stock, and make it work normally again or is there some hardware problem as well?
UPDATE:
It seems I made some progress, flashed 6.0.1 again and did the CF autoroot again.
"Set Warranty bit : kernel" is gone now, and Odin Mode now shows Samsung official as BINARY. Still doensn't charge though.
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Mattson44 said:
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465)...
Click to expand...
Click to collapse
Your best bet is to post this question within the following thread. Someone should be able to help you out or provide some guidance as to where to obtain it.
http://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE