Database Users

Help Please i am desperate

hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help

I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/

Just flash a 4.4.2 stock rom true Odin that is for you device.

[Q] please help: sbl1 partition doesn't exist

i sometimes get an 'error' message rebooting my phone (either directly or to/from twrp)
i think it first occured after i flashed twrp
i'm running on cm12 (nightly)
the full text reads:
boot recovery mode
check boot partitions. .
sbl1 partition doesn't exist
odin mode
product name: sm-g900f
current binary: custom
sytem status: custom
reactivation lock(kk): off
knox warranty void: 0x1 (0)
qualcomm secureboot: enable (csb)
rp swrev: s1, t1, r1, a1, p1
secure download : enable
udc start
if i then press the power button for ten seconds, the system boots without a problem
still, i don't like this
i tried solving this problem by going back to stock
also flashed the pit file for my device (g900f)
didn't help
what's wrong and what should i do?

scienex said:
i sometimes get an 'error' message rebooting my phone (either directly or to/from twrp)
i think it first occured after i flashed twrp
i'm running on cm12 (nightly)
the full text reads:
boot recovery mode
check boot partitions. .
sbl1 partition doesn't exist
odin mode
product name: sm-g900f
current binary: custom
sytem status: custom
reactivation lock(kk): off
knox warranty void: 0x1 (0)
qualcomm secureboot: enable (csb)
rp swrev: s1, t1, r1, a1, p1
secure download : enable
udc start
if i then press the power button for ten seconds, the system boots without a problem
still, i don't like this
i tried solving this problem by going back to stock
also flashed the pit file for my device (g900f)
didn't help
what's wrong and what should i do?
Click to expand...
Click to collapse
Could be an emmc failure.. But I'm sorry to be late to the post

thnx mate!
it's four phones ago
but i appreciate your reply :good:

scienex said:
thnx mate!
it's four phones ago
but i appreciate your reply :good:
Click to expand...
Click to collapse
Absolutely boss!

GS5 Won't Boot After I Tried to Install TWRP

So long story short, I screwed up and tried to install TWRP on my Verizon GS5. I realize now that you need to install Safestrap on the Verizon GS5 and that TWRP doesn't work.
The phone is now stuck trying to boot into recovery mode and failing.
When trying to boot, the first screen says:
Code:
RECOVERY BOOTING
SYS REV CHECK FAIL: No version
SECURE: SECURE VERSION failure (recovery.img)
The second screen is the yellow triangle telling me that "System software not authorized by Verizon..."
Code:
SECURE FAIL: RECOVERY
When I put it into download mode it says:
Code:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Is there any way to fix this? Do I need to use Odin to put a new firmware on the phone?

Can not flash SM-N910F (Deutsche Telekom) to original SW

Power+Home+Volume down shows :
Odin Mode
Product Name: SM-N910F
Current Binary: Custom
System Status: Custom
Reactivation Lock: off
Knox Waranty VOID : 0x1(4)
Qualcomm Secureboot: Enable (CSB)
Power+Home+Volume up NO MENU
I tried to update my device with kies
- bootloop recovery booting
I tried to update my device with Odin
- N910FXXS1CPC5_N910FDTM1COI1_N910FXXS1COK1_HOME.tar
- bootloop recovery booting
What can I do ?

[Help] S5 bricked after flashing TWRP custom recovery with flashify~!

Please help me! My phone stays in download mode with the following messages appearing on screen:
Could not do a normal boot.
Odin Mode.
Product Mode: SM-G900F
Current Binary: Custom
System Status: Custom
Reactivation Lock: Off
Knox Warranty Void: 0x1(4)
Secure Boot: Enable
Ap SWREV: S1,T1,R1,A1, P1
Secure Download: Enable
UDC START

Flash a stock ROM with ODIN

If your first thought after a "brick" isn't "where did I store the tar for my phone?" you should probably read on how to use Odin to repair your phone and not flash things on it again...