Database Users

Note 4 N910T, Need help please. It says firmware update encountered an issue.

Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....

dwaynelegg said:
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
Click to expand...
Click to collapse
PM me...I found a fix for this.

Could not do normal boot.

I installed the with the newest ODIN version the newest Stock Firmware for my N910F.
Then i installed NOBLE ROM UX and i tried RAM ROM.
But with all two custom ROMS i have a boot problem.
The phone can't restart automatically. I must take out the battery an wait one minuten.
Then it comes the error message:
Could not do normal boot.
dd : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Who can me help me with this error?

NEED HELP! I may have bricked my J3, not sure what to do.

I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!

Shadeofdoom said:
I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!
Click to expand...
Click to collapse
Same here but I get the error you are leaving out for recovery.img also. Plus, my USB port is fried. Returns all 0000s for hardware IDs, 3 different cords, 3 machines. At least you have a chance to use recovery. I am totally ****ed.
So, that is ODIN/Download mode. I was high and trying to turn off debugging and switching my USB mode to charge only then doing the whole switch to Modem then back to AP and restart to fix the USB connection with my computer.
Know what I flipped? I'm pretty sure you did the same. I accidentally hit the OEM Unlock switch, turning it off, meaning I enabled OEM Lock. The error when you do a normal boot, not download mode (cuz thats what you posted) is "Custom binary blocked by FRP Lock" (boot.img)". Is your phone stolen or something? That why you left it out?
I got a ton of shady phones from shady mofos who ask me to fix them and then cant pay, but I bought this one new myself and know for sure its not. Releax, it doesn't mean its stolen. IN my case it means drugs are bad and Im dumb.

Rooted S5 doesn't charge correctly, (Knox Warranty Void 0x1(4) )

Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465).
Rooted S5 with 4.4.2 had some problems, random freezing etc. Then it suddenly got stuck in a recovery loop.
I managed to save all important data by flashing TWRP, and then wiped it and flashed 4.4.2 on it again.
I used the phone for about a week, then it suddenly started causing problems, it wouldn't charge anymore when it is booted up. I then tried to wipe it all again and restart the phone but it didnt help. I then tried flashing the newest Android version for the S5 on it. 6.0.1. and flashed the CF-Auto-Root file.
It worked but same problems: It doesn't charge while it's on. When I start it up it shows:
Set Warranty bit : kernel
When I turn it off and connect it to the power it will only show the battery sign with the flash(lightning sign) inside of it, then restart, then show it again, then restart, until infinity. I have even bought a new battery, this is has got to be some weird software thing.
When I enter into download/Odin mode it shows:
PRODUCT NAME: SM-G900F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Is there anything I can do to return to stock, and make it work normally again or is there some hardware problem as well?
UPDATE:
It seems I made some progress, flashed 6.0.1 again and did the CF autoroot again.
"Set Warranty bit : kernel" is gone now, and Odin Mode now shows Samsung official as BINARY. Still doensn't charge though.
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START

Mattson44 said:
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465)...
Click to expand...
Click to collapse
Your best bet is to post this question within the following thread. Someone should be able to help you out or provide some guidance as to where to obtain it.
http://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Problem with digitizer ?

Hello , xda-developers,
I have a SM-N910F, and "played" today with the ROM and recovery, trying to root and put a custom recovery.
The Odin part worked smoothly, changed a couple of times the ROM but not succeeding the part with recovery.
After a wrong file being flashed (n915f-cwm-recovery-6.0.5.1(1128)), the screen mistakes the position of my finger onto screen.
Tried flashing stock ROM for it (COA-N910FXXU1ANK4_N910FCOA1ANK1-20141117 -Android 4.4.4 and N910FXXU1DRI2_N910FCOA1DQI1_COA - Android 6.0.1 ),no luck.
Screen not recognise corectly whereis my finger on screen, but the stilus work perfect, also mouse with OTG seems to work fine.
What is to be done to revert this.
Can be fixable?
THX!

find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START

MasterMarius said:
find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Click to expand...
Click to collapse
Open dialer and Dial *#2663#
Press TSP FW UPDATE
Wait until it finished
Reboot device
Done.
This will recalibrate your touch as normal to default.