So long story short, I screwed up and tried to install TWRP on my Verizon GS5. I realize now that you need to install Safestrap on the Verizon GS5 and that TWRP doesn't work.
The phone is now stuck trying to boot into recovery mode and failing.
When trying to boot, the first screen says:
Code:
RECOVERY BOOTING
SYS REV CHECK FAIL: No version
SECURE: SECURE VERSION failure (recovery.img)
The second screen is the yellow triangle telling me that "System software not authorized by Verizon..."
Code:
SECURE FAIL: RECOVERY
When I put it into download mode it says:
Code:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Is there any way to fix this? Do I need to use Odin to put a new firmware on the phone?
Related
Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
dwaynelegg said:
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
Click to expand...
Click to collapse
PM me...I found a fix for this.
I installed the with the newest ODIN version the newest Stock Firmware for my N910F.
Then i installed NOBLE ROM UX and i tried RAM ROM.
But with all two custom ROMS i have a boot problem.
The phone can't restart automatically. I must take out the battery an wait one minuten.
Then it comes the error message:
Could not do normal boot.
dd : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Who can me help me with this error?
Hey there, I'm new to the whole rooting thing, and I messed up while doing it the first time so I get stuck at the Samsung Logo now, and it says while on that screen 'SET WARRENTY BIT: KERNAL', which from what I have read online means that my bootloader is messed up, but I don't know how to fix it. I will provide as much information as I can while not being able to load into my phone.
Info:
Model: SM-S902L(GP)
GPSAS902CB
FFC ID: A3LSMG900V
Galaxy S5 (TFN Region)
I've tried custom bootloaders, Stock Firmware, Factory Reset. Just about everything I can think of. I've even tried the stock firmware for my model.
I get the error: SW REV CHECK FAIL: (aboot) Fused 3 > Binary 2
Additional Info (From Screen):
ODIN MODE
Product Name: SM-S902L
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Warranty Void: 0x1 (1)
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T3, R1, A3, P1
UDC START
If anybody can help that would be much appreciated!
I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!
Shadeofdoom said:
I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!
Click to expand...
Click to collapse
Same here but I get the error you are leaving out for recovery.img also. Plus, my USB port is fried. Returns all 0000s for hardware IDs, 3 different cords, 3 machines. At least you have a chance to use recovery. I am totally ****ed.
So, that is ODIN/Download mode. I was high and trying to turn off debugging and switching my USB mode to charge only then doing the whole switch to Modem then back to AP and restart to fix the USB connection with my computer.
Know what I flipped? I'm pretty sure you did the same. I accidentally hit the OEM Unlock switch, turning it off, meaning I enabled OEM Lock. The error when you do a normal boot, not download mode (cuz thats what you posted) is "Custom binary blocked by FRP Lock" (boot.img)". Is your phone stolen or something? That why you left it out?
I got a ton of shady phones from shady mofos who ask me to fix them and then cant pay, but I bought this one new myself and know for sure its not. Releax, it doesn't mean its stolen. IN my case it means drugs are bad and Im dumb.