Hey there, I'm new to the whole rooting thing, and I messed up while doing it the first time so I get stuck at the Samsung Logo now, and it says while on that screen 'SET WARRENTY BIT: KERNAL', which from what I have read online means that my bootloader is messed up, but I don't know how to fix it. I will provide as much information as I can while not being able to load into my phone.
Info:
Model: SM-S902L(GP)
GPSAS902CB
FFC ID: A3LSMG900V
Galaxy S5 (TFN Region)
I've tried custom bootloaders, Stock Firmware, Factory Reset. Just about everything I can think of. I've even tried the stock firmware for my model.
I get the error: SW REV CHECK FAIL: (aboot) Fused 3 > Binary 2
Additional Info (From Screen):
ODIN MODE
Product Name: SM-S902L
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Warranty Void: 0x1 (1)
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T3, R1, A3, P1
UDC START
If anybody can help that would be much appreciated!
Related
So long story short, I screwed up and tried to install TWRP on my Verizon GS5. I realize now that you need to install Safestrap on the Verizon GS5 and that TWRP doesn't work.
The phone is now stuck trying to boot into recovery mode and failing.
When trying to boot, the first screen says:
Code:
RECOVERY BOOTING
SYS REV CHECK FAIL: No version
SECURE: SECURE VERSION failure (recovery.img)
The second screen is the yellow triangle telling me that "System software not authorized by Verizon..."
Code:
SECURE FAIL: RECOVERY
When I put it into download mode it says:
Code:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Is there any way to fix this? Do I need to use Odin to put a new firmware on the phone?
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
dwaynelegg said:
Ive tried everything. I tried flashing with odin and kiesI need to do an emergency firmware recovery on my SM-N910T phone. I have a new pc so I do not have the code. How to I obtain a new one so I can update my firmware.
This is what it says..
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT: ENABLED (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Then it tells me to use Kies to do a firmware recovery. I cant do an emergency recovery because I dont have the recovery code. Odin fails everytime I try to flash anything on it. Please help ....
Click to expand...
Click to collapse
PM me...I found a fix for this.
I installed the with the newest ODIN version the newest Stock Firmware for my N910F.
Then i installed NOBLE ROM UX and i tried RAM ROM.
But with all two custom ROMS i have a boot problem.
The phone can't restart automatically. I must take out the battery an wait one minuten.
Then it comes the error message:
Could not do normal boot.
dd : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Who can me help me with this error?
Hi all. Can Someone pls tell me what is happening here and what should i do?the phone tried to restart on it's own and now its stuck here on restart screen with this messages
Could not do normal boot.
Ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SW- N910F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: ON
KNOZ WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE ( CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START[
And also under the droid it says
Downloading...
Do not turn off target!,
Could it be that you done a Update? you could try a factory reset
Say goodbye to your Note 4, eMMC failure! Samsung wants you to buy a new phone.
Hey there,
i probably bricked my device while trying to root it. Its an sm-g901f and right now it shows me the recovery screen with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & and try again." Of course I tried but the Samsung download-page wants me to get "Smart Switch" which couldn't do anything noticeable.
In the left top corner it reads:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G901F
CURRENT BINARY: Custom
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1 R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
Unsupported dev_type
Unsupported dev_type
Is there any hope? I am quite computer savvy but only a mere beginner with android. Can someone point me in the right direction to fix the device?