I am a noob at this, so pardon me for my ignorance. After unrooting my Note 3 i am unable to update my firmware OTA or with Kies, even after factory resetting it did not work. After doing some research i learned that i have to flash my phone with stock firmware using odin(in order to get my phone back to normal). Do i have to flash the original firmware that my phone came with, or can i just flash it with the most up to date stock firmware that i want?
Jaxxxed said:
I am a noob at this, so pardon me for my ignorance. After unrooting my Note 3 i am unable to update my firmware OTA or with Kies, even after factory resetting it did not work. After doing some research i learned that i have to flash my phone with stock firmware using odin(in order to get my phone back to normal). Do i have to flash the original firmware that my phone came with, or can i just flash it with the most up to date stock firmware that i want?
Click to expand...
Click to collapse
You can flash the same build fw or the latest. Install 'samsung phone info' app to check your csc. You can even use the app to download the fw. But in case downloading takes forever to complete, you may use 'samsung firmware downloader'. It's a windows utility tool to download fw from sammobile.
Sent from my SM-N920C
When i attempted to use Odin, the flashing failed. here is the Odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone still works fine, and i have everything set up properly so that my phone can be flashed. so, im not sure whats going wrong.
Jaxxxed said:
When i attempted to use Odin, the flashing failed. here is the Odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone still works fine, and i have everything set up properly so that my phone can be flashed. so, im not sure whats going wrong.
Click to expand...
Click to collapse
It's N900?. Try different fw.
In download mode does it show reactivation lockn?
Sent from my SM-N920C
Rosli59564 said:
It's N900?. Try different fw.
In download mode does it show reactivation lockn?
Sent from my SM-N920C
Click to expand...
Click to collapse
Here is what my phone says in download mode:
Odin Mode
Product name: SM-N900A
Current Binary: Samsung official
System status: custom
Knox kernel lock: 0x0
Knox warranty void: 0x0
Qualcomm Secure boot: enable(csb)
RP SWREV: S2, T2, A2, A2, P2
Write protection:enable
The n900a is an att note 3.
Related
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
ryannnnn said:
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
Click to expand...
Click to collapse
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
urko95 said:
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
Click to expand...
Click to collapse
It's fixed, i flashed CM 10.2 RC2 in CWM it worked, then i flashed 4.3 GP addition and it's fine. WiFi doesnt work but i guess thats a new issue
Thanks!
Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance
UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present
xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:
Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:
I installed CyanogenMod 10.2.1 on my rooted Sprint S4. Upon realizing that I could no longer connect my Gear 2 watch to my phone, I would like to reset my phone to factory settings, unrooted, with the stock ROM. I followed the guide at galaxys4root.com (xda won't let me post the outside link, but it is the first result when you Google "galaxy s4 root unroot") and used all the downloads from that page. However, upon trying to flash to my phone, I receive this error in Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can then shut down my phone and reboot back into CM just fine, but I really would like to have the stock ROM back so I can use my watch. If anyone could help me with this, I'd really appreciate it. Thanks!
GadgetGuy3 said:
I installed CyanogenMod 10.2.1 on my rooted Sprint S4. Upon realizing that I could no longer connect my Gear 2 watch to my phone, I would like to reset my phone to factory settings, unrooted, with the stock ROM. I followed the guide at galaxys4root.com (xda won't let me post the outside link, but it is the first result when you Google "galaxy s4 root unroot") and used all the downloads from that page. However, upon trying to flash to my phone, I receive this error in Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can then shut down my phone and reboot back into CM just fine, but I really would like to have the stock ROM back so I can use my watch. If anyone could help me with this, I'd really appreciate it. Thanks!
Click to expand...
Click to collapse
What version of ODIN are you using?
pontif said:
What version of ODIN are you using?
Click to expand...
Click to collapse
I've tried both 1.85 and 3.04, both present the same error
GadgetGuy3 said:
I've tried both 1.85 and 3.04, both present the same error
Click to expand...
Click to collapse
The stock nae forum suggests using 3.07
Put in pda slot
Be sure to power completely off before going into download mode
pontif said:
The stock nae forum suggests using 3.07
Put in pda slot
Be sure to power completely off before going into download mode
Click to expand...
Click to collapse
Just did all that, still got the error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Attaced is a photo of the screen of my phone after the flash fails. In case you can't read it, the text in the top-left corner says:
ODIN MODE
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
WRITE PROTECTION: Enable
eMAC BURST MODE: enabled
START [244, 1440]
SECURE CHECK FAIL : aboot
Since you have the file already here is the link from Sammmobile. Also if you want ,download the Odin version that they provide. GoodLuck
GadgetGuy3 said:
Just did all that, still got the error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Attaced is a photo of the screen of my phone after the flash fails. In case you can't read it, the text in the top-left corner says:
ODIN MODE
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
WRITE PROTECTION: Enable
eMAC BURST MODE: enabled
START [244, 1440]
SECURE CHECK FAIL : aboot
Click to expand...
Click to collapse
Well there's you problem says you have the l720T version of the s4. You need stock firmware for the sphl720 T version. Search for that specific device
BIGSAMDA1ST said:
Since you have the file already here is the link from Sammmobile. Also if you want ,download the Odin version that they provide. GoodLuck
Click to expand...
Click to collapse
There's no link in this post
Holy S*#@. Anyway just saw that @pontif just posted that you have the T version so the link I provided will not work.
---------- Post added at 01:57 PM ---------- Previous post was at 01:50 PM ----------
Here you go.. Its the latest for SPH-L720T
http://www.sammobile.com/firmwares/3/?download=28778
BIGSAMDA1ST said:
Holy S*#@. Anyway just saw that @pontif just posted that you have the T version so the link I provided will not work.
---------- Post added at 01:57 PM ---------- Previous post was at 01:50 PM ----------
Here you go.. Its the latest for SPH-L720T
Click to expand...
Click to collapse
pontif said:
Well there's you problem says you have the l720T version of the s4. You need stock firmware for the sphl720 T version. Search for that specific device
Click to expand...
Click to collapse
Alright, that was a stupid mistake on my part, I apologize. I'm downloading the L720T firmware from Sammobile now and I also downloaded Sammoblie's suggested ODIN, which is 3.09. I will post the results after the download finished and I try to flash it.
GadgetGuy3 said:
Alright, that was a stupid mistake on my part, I apologize. I'm downloading the L720T firmware from Sammobile now and I also downloaded Sammoblie's suggested ODIN, which is 3.09. I will post the results after the download finished and I try to flash it.
Click to expand...
Click to collapse
That worked. Thanks for your help.
PLZ HELP!!!
Hi, I am having the EXACT same issue but with SPH-L720 device. I've tried multiple odin's.....STILL....."FAILED"
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I desperately need to return to stock so I can update my device. It is not running well AT ALL.
Thanks in advance.
bbryson said:
Hi, I am having the EXACT same issue but with SPH-L720 device. I've tried multiple odin's.....STILL....."FAILED"
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I desperately need to return to stock so I can update my device. It is not running well AT ALL.
Thanks in advance.
Click to expand...
Click to collapse
Try downloading the NG2.tar. It's the most up to date.
Will do. Thank you!
Hey guys!
I'm working with the I9505 at the moment.
I flashed Omega rom (Version 40) and the Wifi stopped working..
To fix it, I went to Sammobile and just went ahead and got the Stock Australian rom (So far I've tried with the stock 4x roms and none are working, even though the phone was at 4.2.2)
The phone won't take anything from Odin.
I get a "Fail" after trying to flash things to the phone.
The messages aren't always the same, depending on what I'm flashing. The most recent from odin is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
The phone screen itself says:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
At other times it'll read things like Fused 4, Binary 1 and stuff like that...
Please help
Just tried again with a different firmware and got the following
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
screen says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
BAR [240,1440]
Almost all Odin errors can be resolved by the following:
- Different usb port
- Different usb cable.
I9505XXUGNH6
should flash just fine.
The first one you flashed is 4.3 and you probably can't flash that anymore.
Hi!
I got it fixed (I think. Still got some testing to do) by booting the phone until it displayed something along the lines of 'Firmware update error recovery' and THAT 'version' of Odin allowed me to add the "I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5" file
Not sure how that's any different from Odin but yeah, the phone boots, Wifi is on.. everything is fine. Going to try to add Root and TWRP later tonight though
I cant seem to unroot my phone at all back to a stock rom. It looks like an authentication problem with knox, but im not sure.
The rom im trying to flash is the I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2.
Ive tried using a pit file before and it ended up soft bricking the phone.
Im really sick of CM13 and 12 and I'd love to get back to stock.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, it says STAT [224,1440]
Enter download mode and read off the model number on the screen please?
The failure after trying to flash aboot.mbn indicates the rom being flashed has an older bootloader than the bootloader currently on the phone. Not sure if your phone has a downgradeable bootloader.
@audit13: I really need to read logs a bit more thoroughly.
That said, I think the bootloader can be downgraded, so long as the replacement has Knox included. I haven't tried it however, so you could just as easily be right.
The bootloader is probably not locked but I don't think a bootloader can be downgraded to 4.3 or older.
Honestly, I can't remember.