I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
ryannnnn said:
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
Click to expand...
Click to collapse
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
urko95 said:
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
Click to expand...
Click to collapse
It's fixed, i flashed CM 10.2 RC2 in CWM it worked, then i flashed 4.3 GP addition and it's fine. WiFi doesnt work but i guess thats a new issue
Thanks!
Related
Hello,
I've been trying to flash a new ROM on my NOTE 3 (SM-900)
the ROMi've been using is the official Samsung ROM for Israel. (device compatible ofc)
but during flashing Odin (3.04) says failure.
this happen with two versions of the Israeli ROM and another ROM i've tried ( Paraguay's ROM)
the device is not a fake and it seem like i can flash it only with the official Hong Kong ROM.
the Odin log shows the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMJ6_N900OJKCMJ4_N900XXUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise??
So when I upgraded to android 4.3 a while ago my phone stopped making and receiving sounds in calls. Weird problem, and I sent the phone out a couple of times to get it fixed and they just replaced the speaker and mic (which did absolutely nothing). Somebody else told me it was a problem with the 4.3 update and to try installing a 4.4.2 ROM, which I did (Gummy 2.1 using the CWM Recovery method). I know, I know, I voided my warranty, but there was only a couple months left and they weren't fixing it. Anyways, after finally upgrading the stupid thing the calls still didn't work! So I'm trying to rollback to 4.2.2 (firmware from sammobile .com), but every time I try with Odin 3.09 it fails. Here's the log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and then the only way to get the phone working again is to use odin to flash the CWM Recovery again. Any idea how to fix this?
Thanks
EDIT: Just thinking, is it possible to use the zip file I downloaded and do the CWM install from zip thingy the way that I installed Gummy 2.1?
Try just flashing the modem from 4.2.2 using twrp/CWM
sent from my mobile device
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
musheercmr said:
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
Click to expand...
Click to collapse
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
xclub_101 said:
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
Click to expand...
Click to collapse
what if flash N9005XXUEND6 using odin? will it work ?
musheercmr said:
what if flash N9005XXUEND6 using odin? will it work ?
Click to expand...
Click to collapse
If it is for the same model and region as your N9005 it could/should work, otherwise you might still see problems. Be careful not to confuse Hong-Kong 16GB model with EU 32GB models, also there have been some problems with other hardware or CSC combinations.
I cant seem to unroot my phone at all back to a stock rom. It looks like an authentication problem with knox, but im not sure.
The rom im trying to flash is the I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2.
Ive tried using a pit file before and it ended up soft bricking the phone.
Im really sick of CM13 and 12 and I'd love to get back to stock.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, it says STAT [224,1440]
Enter download mode and read off the model number on the screen please?
The failure after trying to flash aboot.mbn indicates the rom being flashed has an older bootloader than the bootloader currently on the phone. Not sure if your phone has a downgradeable bootloader.
@audit13: I really need to read logs a bit more thoroughly.
That said, I think the bootloader can be downgraded, so long as the replacement has Knox included. I haven't tried it however, so you could just as easily be right.
The bootloader is probably not locked but I don't think a bootloader can be downgraded to 4.3 or older.
Honestly, I can't remember.
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
hawre96 said:
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
Click to expand...
Click to collapse
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
DeadSquirrel01 said:
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
Click to expand...
Click to collapse
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
hawre96 said:
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
Click to expand...
Click to collapse
No problem, I'm happy u solved the problem