[Q] Help with rooting a samsung offical rom - Galaxy Note 3 Q&A, Help & Troubleshooting

Hello,
I've been trying to flash a new ROM on my NOTE 3 (SM-900)
the ROMi've been using is the official Samsung ROM for Israel. (device compatible ofc)
but during flashing Odin (3.04) says failure.
this happen with two versions of the Israeli ROM and another ROM i've tried ( Paraguay's ROM)
the device is not a fake and it seem like i can flash it only with the official Hong Kong ROM.
the Odin log shows the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMJ6_N900OJKCMJ4_N900XXUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise??

Related

Help plz I9505 stuck in bootloop

Hi,
tried to flash the 4.4 stock on my I9505 (was on 4.3, which worked fine).
4.4 didnt run smooth so I restored the old backup and ended up in a bootloop.
Tried to flash Samsung 4.3 stock via Odin but it fails every time giving me this message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDK_I9500MBCAMD6_I9500XXUAMDK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions? Would be very happy!

Trying to remove and flash stock with odin, Nand fail!

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Anyone know how to fix this?
Where did you get that firmware file? If is from Sammobile At&t version is failing Odin.

[Q] Korean GTi9500- now good for building walls...

Hi guys - first post.
I have been trying to upgrade my Gti9500 Octa with Kitkat. After trying many different upgrades I finally got one to work through odin:
I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar
It's the Hong Kong version.
all goes well through odin until here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Seems I need a modem.bin file.
In dowload mode ( which is in Korean!) it says:
Product Name: SHV-E300S
Current Binary: Custom
System Status: Custom
Warrany Bit:1
Apologies if I am in the wrong thread/
Any help is greatly appreciated.
charleville said:
Hi guys - first post.
I have been trying to upgrade my Gti9500 Octa with Kitkat. After trying many different upgrades I finally got one to work through odin:
I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar
It's the Hong Kong version.
all goes well through odin until here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Seems I need a modem.bin file.
...
Apologies if I am in the wrong thread/
Any help is greatly appreciated.
Click to expand...
Click to collapse
I had the same on GT-I9595 and had to use a different usb port for it to flash correctly
Your phone is SHV-E300S NOT GT-I9500 and you're trying to flash i9500 rom on it. That's why it's fail.
Find SHV-E300S rom and flash it. It should work then.
(If I can remember correctly SHV-E300S and i9500 are different in modem hw. That should explain why it fail at flashing modem.)
NonXtreme said:
Your phone is SHV-E300S NOT GT-I9500 and you're trying to flash i9500 rom on it. That's why it's fail.
Find SHV-E300S rom and flash it. It should work then.
(If I can remember correctly SHV-E300S and i9500 are different in modem hw. That should explain why it fail at flashing modem.)
Click to expand...
Click to collapse
... and you can find the latest firmware of SHV-E300S: HERE

[Q] can't install any STOCK ROM using ODIN but the Chinese one I9500

hey everybody
so i was one of those who tried the Chinese leaked lollipop Rom
but now i can't install the Official ones using odin tried the Russian and the Indian didn't work
here is my odin log
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and by the way i flashed the pit file that came with the chinese software which increased my internal storage free space
Solved by flashing adonis.pit file

Galaxy S5 G900F CFAuto Root Fails

Galaxy S5 root issue
So I need to root my S5 after a full reset but it keeps running into problems. I've tried from installing usb drivers to disabling reactivation lock and changing usb ports. I'm on G900F t-mobile variant with stock rom and firmware after a full reset, but no matter what I do it just wont do.
This is the log:
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help please
I've got the same problem
???
Sent from my SM-G900F using XDA Free mobile app

Categories

Resources