Galaxy S5 G900F CFAuto Root Fails - Galaxy S 5 Q&A, Help & Troubleshooting

Galaxy S5 root issue
So I need to root my S5 after a full reset but it keeps running into problems. I've tried from installing usb drivers to disabling reactivation lock and changing usb ports. I'm on G900F t-mobile variant with stock rom and firmware after a full reset, but no matter what I do it just wont do.
This is the log:
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help please

I've got the same problem
???
Sent from my SM-G900F using XDA Free mobile app

Related

[Q] Help with rooting a samsung offical rom

Hello,
I've been trying to flash a new ROM on my NOTE 3 (SM-900)
the ROMi've been using is the official Samsung ROM for Israel. (device compatible ofc)
but during flashing Odin (3.04) says failure.
this happen with two versions of the Israeli ROM and another ROM i've tried ( Paraguay's ROM)
the device is not a fake and it seem like i can flash it only with the official Hong Kong ROM.
the Odin log shows the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMJ6_N900OJKCMJ4_N900XXUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise??

Unroot Galaxy S4

Hi I am very new to this rooting thing, im trying to unroot my galaxy s4 AT&T. I have used oden and the stock firmware I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar I get an fail right when odin starts it says this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is this the wrong firmware? im sorry for such a boot questions but I have no idea what to do. Thank you for all your help. I am on android 4.3
Wrong firmware you need the MK2 Odin . Use the full odin in the pda slot http://forum.xda-developers.com/showthread.php?t=2621279
Sent from my SAMSUNG-SGH-I337 using Tapatalk

Trying to remove and flash stock with odin, Nand fail!

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Anyone know how to fix this?
Where did you get that firmware file? If is from Sammobile At&t version is failing Odin.

[Q] can't install any STOCK ROM using ODIN but the Chinese one I9500

hey everybody
so i was one of those who tried the Chinese leaked lollipop Rom
but now i can't install the Official ones using odin tried the Russian and the Indian didn't work
here is my odin log
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and by the way i flashed the pit file that came with the chinese software which increased my internal storage free space
Solved by flashing adonis.pit file

Flashing Problem [ Fail! (Auth) ]

Hello all , I Just had a problem while flashing official ROM for SM-G530h Egypt ,Odin Gives me this error :
_________________________
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
_______________________________
Note : The device is Dual SIM , not rooted , It's completely clean ..
The ROM http://www.sammobile.com/firmwares/download/49118/G530HXCU1AOE2_G530HOJV1AOF1_EGY/
ALDaFeN said:
Hello all , I Just had a problem while flashing official ROM for SM-G530h Egypt ,Odin Gives me this error :
_________________________
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
_______________________________
Note : The device is Dual SIM , not rooted , It's completely clean ..
The ROM
Click to expand...
Click to collapse
Just to check ... try flash a 5.0.2 instead of 4.4.4 ... forget language until solution

Categories

Resources