[Q] Korean GTi9500- now good for building walls... - Galaxy S 4 Q&A, Help & Troubleshooting

Hi guys - first post.
I have been trying to upgrade my Gti9500 Octa with Kitkat. After trying many different upgrades I finally got one to work through odin:
I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar
It's the Hong Kong version.
all goes well through odin until here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Seems I need a modem.bin file.
In dowload mode ( which is in Korean!) it says:
Product Name: SHV-E300S
Current Binary: Custom
System Status: Custom
Warrany Bit:1
Apologies if I am in the wrong thread/
Any help is greatly appreciated.

charleville said:
Hi guys - first post.
I have been trying to upgrade my Gti9500 Octa with Kitkat. After trying many different upgrades I finally got one to work through odin:
I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar
It's the Hong Kong version.
all goes well through odin until here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500ZSUDNB3_I9500OZSDNB3_I9500XXUFNA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Seems I need a modem.bin file.
...
Apologies if I am in the wrong thread/
Any help is greatly appreciated.
Click to expand...
Click to collapse
I had the same on GT-I9595 and had to use a different usb port for it to flash correctly

Your phone is SHV-E300S NOT GT-I9500 and you're trying to flash i9500 rom on it. That's why it's fail.
Find SHV-E300S rom and flash it. It should work then.
(If I can remember correctly SHV-E300S and i9500 are different in modem hw. That should explain why it fail at flashing modem.)

NonXtreme said:
Your phone is SHV-E300S NOT GT-I9500 and you're trying to flash i9500 rom on it. That's why it's fail.
Find SHV-E300S rom and flash it. It should work then.
(If I can remember correctly SHV-E300S and i9500 are different in modem hw. That should explain why it fail at flashing modem.)
Click to expand...
Click to collapse
... and you can find the latest firmware of SHV-E300S: HERE

Related

[Q] Help with rooting a samsung offical rom

Hello,
I've been trying to flash a new ROM on my NOTE 3 (SM-900)
the ROMi've been using is the official Samsung ROM for Israel. (device compatible ofc)
but during flashing Odin (3.04) says failure.
this happen with two versions of the Israeli ROM and another ROM i've tried ( Paraguay's ROM)
the device is not a fake and it seem like i can flash it only with the official Hong Kong ROM.
the Odin log shows the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMJ6_N900OJKCMJ4_N900XXUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise??

[Q] help please..... phone bricked :(

my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
musheercmr said:
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
Click to expand...
Click to collapse
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
xclub_101 said:
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
Click to expand...
Click to collapse
what if flash N9005XXUEND6 using odin? will it work ?
musheercmr said:
what if flash N9005XXUEND6 using odin? will it work ?
Click to expand...
Click to collapse
If it is for the same model and region as your N9005 it could/should work, otherwise you might still see problems. Be careful not to confuse Hong-Kong 16GB model with EU 32GB models, also there have been some problems with other hardware or CSC combinations.

I337 hang on samsung LOGO

i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
hitibiti said:
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
Click to expand...
Click to collapse
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
MAX 404 said:
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
Click to expand...
Click to collapse
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
You need to give us more details. Post the Odin log here.
hitibiti said:
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
Click to expand...
Click to collapse
Lennyz1988 said:
You need to give us more details. Post the Odin log here.
Click to expand...
Click to collapse
Hi
As Lennyz1988 said more detail , post log.......
flashed ok still same problem with this version ; I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
now i try this version with pit file
I337_16GB.pit
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
now i try with
I337_16GB.pit
AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse

[Q] can't install any STOCK ROM using ODIN but the Chinese one I9500

hey everybody
so i was one of those who tried the Chinese leaked lollipop Rom
but now i can't install the Official ones using odin tried the Russian and the Indian didn't work
here is my odin log
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and by the way i flashed the pit file that came with the chinese software which increased my internal storage free space
Solved by flashing adonis.pit file

can't flash marshmallow firmware

Hi,i tried to flash firmware but odin blocks.. (sorry for english),so there is a way for flash it from recovery?( Italy Vodafone OMN firmware marshmallow)
up
bubugaga said:
Hi,i tried to flash firmware but odin blocks.. (sorry for english),so there is a way for flash it from recovery?( Italy Vodafone OMN firmware marshmallow)
Click to expand...
Click to collapse
What device model do you have? Are you trying to flash another device model for your phone ie> 928F for a 928G etc? What error are you having?
please provide more details and someone might be able to assist
I have a problem with flashing the marshmallow bootloader and radio files from the g928f onto my g928t. I've been looking everywhere for a solution but I can't find anything. Here is what Odin reads:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G928FXXU2BPB6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I'm having the same problem too ( flashing g9287c into g9287
is it because of pit file ? do i need it to flash another variant ?
guys please a little push to the right direction

Categories

Resources