Help plz I9505 stuck in bootloop - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
tried to flash the 4.4 stock on my I9505 (was on 4.3, which worked fine).
4.4 didnt run smooth so I restored the old backup and ended up in a bootloop.
Tried to flash Samsung 4.3 stock via Odin but it fails every time giving me this message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDK_I9500MBCAMD6_I9500XXUAMDK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions? Would be very happy!

Related

[Q] Help with rooting a samsung offical rom

Hello,
I've been trying to flash a new ROM on my NOTE 3 (SM-900)
the ROMi've been using is the official Samsung ROM for Israel. (device compatible ofc)
but during flashing Odin (3.04) says failure.
this happen with two versions of the Israeli ROM and another ROM i've tried ( Paraguay's ROM)
the device is not a fake and it seem like i can flash it only with the official Hong Kong ROM.
the Odin log shows the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMJ6_N900OJKCMJ4_N900XXUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any advise??

Okay, I need help and I feel dumb..

I rooted my s4 just to try it and I'm stuck trying to get it to go back to stock.
I have a note 3 now and I've got everything going well with that but the s4 (I have the I337).
I have it rooted and the phone will start and is a perfectly functional android phone, but whenever I try to get it into recovery mode I can only get it to go to download mode. Odin flashes to stock fail with this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
the stock flash was linked to by others I found on XDA.
Also, details about the phone:
Jelly Bean 4.2.2
Baseband I337UCAMF3
Clockworkmod 6.0.4.4
Thanks for any and all help!
attbrandon said:
I rooted my s4 just to try it and I'm stuck trying to get it to go back to stock.
I have a note 3 now and I've got everything going well with that but the s4 (I have the I337).
I have it rooted and the phone will start and is a perfectly functional android phone, but whenever I try to get it into recovery mode I can only get it to go to download mode. Odin flashes to stock fail with this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
the stock flash was linked to by others I found on XDA.
Also, details about the phone:
Jelly Bean 4.2.2
Baseband I337UCAMF3
Clockworkmod 6.0.4.4
Thanks for any and all help!
Click to expand...
Click to collapse
You cannot add a custom recovery to MF3 if the phone came with that firmware you will get hard brick
Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3
---------- Post added at 04:55 PM ---------- Previous post was at 04:51 PM ----------
Venom0642 said:
You cannot add a custom recovery to MF3 if the phone came with that firmware you will get hard brick
Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3
Click to expand...
Click to collapse
I wish I could help more but I'm on the road hopefully someone will explain it better then what I mention.
Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3
Because you are on MF3, the bootloader is locked and there is no exploit. Therefore, custom recoveries won't install. The reason ODIN is failing is because you are using the MDB files instead of MF3. It is impossible to downgrade the firmware back to any previous version. If you want a recovery, the most you can get is Safestrap, but make sure you read up plenty on it before you install it, as it is not a normal recovery and is not even installed to the recovery partition.
need help
every time i try to reset my galaxy s4 att to stock it fails heres what it says
<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Added!! <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> aboot.mbn <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! (Auth) <OSM> All threads completed. (succeed 0 / failed 1)
ramiijabedd said:
every time i try to reset my galaxy s4 att to stock it fails heres what it says
<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Added!! <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> aboot.mbn <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! (Auth) <OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Grab the MF3 Odin flashable tars and flash them the same way to get back to complete factory stock. Or you can get the MK2 tars and update to 4.3 and use Saferoot to easily get root since you already have drivers installed. Then look up how to install Safestrap for MK2, (which is really not too difficult), and TWRP v3.71to use as a recovery.

Unroot Galaxy S4

Hi I am very new to this rooting thing, im trying to unroot my galaxy s4 AT&T. I have used oden and the stock firmware I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar I get an fail right when odin starts it says this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is this the wrong firmware? im sorry for such a boot questions but I have no idea what to do. Thank you for all your help. I am on android 4.3
Wrong firmware you need the MK2 Odin . Use the full odin in the pda slot http://forum.xda-developers.com/showthread.php?t=2621279
Sent from my SAMSUNG-SGH-I337 using Tapatalk

note 3 stuck afer odin error , please help ?

Hi,
Update : Thanks for your suggestions , the issue was fixed i was just tinkering around trying again and it worked on the same firmware !
I have a note 3 sm 9005 , i was recently trying to update to this lollipop firmware N9005XXUGBOE9 , mine was originally some uae version kitkat.
When i tired odin it failed , saying write operation failed. Now it is stuck at this and asks to recover via kies,
Please help how to fix this , searched a lot but no help,
tried changing ports , usb cable , tried to use pit file (later) ,
but none of them fixed my issue !
odin errorlog
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOE9_N9005DBTGBOF1_N9005XXUGBOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Download a different ROM, and retry.

[HELP][HELP] SM-A510FD Unable to flash stock

I'm unable to restore stock rom in SM-A510FD.
Earlier i was able to restore stock using the same file but suddenly what happened. Please Help!!
When tried using odin this error come up ->
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
HELP!!HELP!!HELP!!HELP!!
@TheMadScientist Can yo please close this thread. Since no one helped me. lol
Although the problem is solved.
bunnyy95 said:
@TheMadScientist Can yo please close this thread. Since no one helped me. lol
Although the problem is solved.
Click to expand...
Click to collapse
Thread closed per OPs request:good:

Categories

Resources