Database Users

All sensors stop working

Hi,
After upgrading to KitKat and a custom ROM I have been having multiple issues with sensors. I have factory reset several times and clean flashed a few different ROMs but with the same result. The sensors do initially work but then just suddenly stop for no apparent reason.
I have also restored from my efs backup but this has not helped.
Any other suggestions?
Cheers

Any help, please?

I would suggest going back to pure stock 4.2.2 off samimobile first the full reset from Samsung recovery and wipe. You don't mention which custom roms ? Try that first though... Let me know !!

Full wipe your phone in recovery System, firmware,... Etc then reboot directly from CWM recovery in advance settings to download(odin mod) and flash the stock ROM.
make sure you back up everything.
Hope it helps
Sent from my SM-N9005 using Tapatalk

Dahdoul said:
Full wipe your phone in recovery System, firmware,... Etc then reboot directly from CWM recovery in advance settings to download(odin mod) and flash the stock ROM.
make sure you back up everything.
Hope it helps
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hi,
Did as both of you suggested but the problem still occurs. This is on X-note but also occurred on Omega. At a bit of a loss here as reverting to stock doesn't seem to help. I flashed the UK 02 rom as EE have not released 4.4.2 yet.
Any further suggestions?
Cheers

pinn___________ said:
Hi,
Did as both of you suggested but the problem still occurs. This is on X-note but also occurred on Omega. At a bit of a loss here as reverting to stock doesn't seem to help. I flashed the UK 02 rom as EE have not released 4.4.2 yet.
Any further suggestions?
Cheers
Click to expand...
Click to collapse
For me disabling media scanner did the trick, had the same problems, and I use tasker to disable media scanner when screen turns off, never had a problem since.
Sent from my SM-N9005

dfi2k5 said:
For me disabling media scanner did the trick, had the same problems, and I use tasker to disable media scanner when screen turns off, never had a problem since.
Sent from my SM-N9005
Click to expand...
Click to collapse
Hi,
I can't find the media scanner when I go into Titanium. What's the exact name, please?

pinn___________ said:
Hi,
I can't find the media scanner when I go into Titanium. What's the exact name, please?
Click to expand...
Click to collapse
Enter terminal emulator and get su access, then write:
pm disable com.android.providers.media/com.android.providers.media.MediaScannerReceiver
Sent from my SM-N9005

dfi2k5 said:
Enter terminal emulator and get su access, then write:
pm disable com.android.providers.media/com.android.providers.media.MediaScannerReceiver
Sent from my SM-N9005
Click to expand...
Click to collapse
Thanks . Tried that and for the moment sensors seem okay. Although now my wifi won't toggle on/off. Tearing my hair out here - grrrr!!!:crying:

Can this be done via Titanium backup or no? thx

Tried to downgrade firmware from 511070220 to 510058520. Now a lockscreen appears.

I tried to downgrade my rooted firmware from 511070220 to 510058520. After reboot I get a lockscreen. Anyone know how to fix this?
Only pressing the option key brings me to the regular menu.

yazyazoo said:
I tried to downgrade my rooted firmware from 511070220 to 510058520. After reboot I get a lockscreen. Anyone know how to fix this?
Only pressing the option key brings me to the regular menu.
Click to expand...
Click to collapse
You might need to do a factory reset.

rbox said:
You might need to do a factory reset.
Click to expand...
Click to collapse
I have the two sites blocked and cwm installed. Is a factory reset safe?

yazyazoo said:
I have the two sites blocked and cwm installed. Is a factory reset safe?
Click to expand...
Click to collapse
Yes

nyder said:
Yes
Click to expand...
Click to collapse
Thanks a lot!

[Q] Sudden fingerprint "No match" error? Possible secure storage error.

Hi guys.
I'm really stuck here. My fingerprint sensor suddenly started showing me 'no match' when I try to scan it, but I can unlock my screen with the emergency password.
However, if I try to access private mode, neither my fingerprint nor my backup password works.
Can anyone shed some light on this matter?
Thanks.
EDIT: My phone is an SM-910F.

s18067 said:
Hi guys.
I'm really stuck here. My fingerprint sensor suddenly started showing me 'no match' when I try to scan it, but I can unlock my screen with the emergency password.
However, if I try to access private mode, neither my fingerprint nor my backup password works.
Can anyone shed some light on this matter?
Thanks.
EDIT: My phone is an SM-910F.
Click to expand...
Click to collapse
Try deleting your fingerprints and adding them again, or maybe restarting the phone would help.

Ashatar said:
Try deleting your fingerprints and adding them again, or maybe restarting the phone would help.
Click to expand...
Click to collapse
I can't even access my fingerprint manager. And I've restarted a few times to no avail.
It also seems that the only place my emergency password works is the lock screen. I can't even change my lock type.

s18067 said:
I can't even access my fingerprint manager. And I've restarted a few times to no avail.
It also seems that the only place my emergency password works is the lock screen. I can't even change my lock type.
Click to expand...
Click to collapse
Are you rooted with custom ROM?

Ashatar said:
Are you rooted with custom ROM?
Click to expand...
Click to collapse
Yes, I'm on a custom ROM. I've been on a custom for months now and it's been fine, though..

Check if runtime is Dalvik.my private mode isn't working on art,completely stock no root
Sent from my SM-N910G using XDA Premium 4 mobile app

RISHI RAJ said:
Check if runtime is Dalvik.my private mode isn't working on art,completely stock no root
Sent from my SM-N910G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't even find the option to switch runtimes in my dev options. I'm running a Lollipop custom ROM.

Bump

s18067 said:
Bump
Click to expand...
Click to collapse
Maybe you should try wiping data and starting all over again, but I'd recommend installing an official ROM from Samsung....

Ashatar said:
Maybe you should try wiping data and starting all over again, but I'd recommend installing an official ROM from Samsung....
Click to expand...
Click to collapse
I was hoping it wouldn't come to that... Oh well...

s18067 said:
I was hoping it wouldn't come to that... Oh well...
Click to expand...
Click to collapse
It's a bummer.Good luck.

having same problem on N910T, wondering what finally fixed it.

Unauthorised actions have been detected

Since switching back to stock lollipop firmware from a custom rom, I'm continuously seeing this message "Unauthorised actions have been detected" in my notification bar. When I open it, it takes me to smart manager where I've got an option of reboot. After rebooting it takes me to TWRP, nothing else happens after TWRP opens.
Any fix for that?

munimjaffer said:
Since switching back to stock lollipop firmware from a custom rom, I'm continuously seeing this message "Unauthorised actions have been detected" in my notification bar. When I open it, it takes me to smart manager where I've got an option of reboot. After rebooting it takes me to TWRP, nothing else happens after TWRP opens.
Any fix for that?
Click to expand...
Click to collapse
TWRP may be the cause of this. Or root, if present.

GDReaper said:
TWRP may be the cause of this. Or root, if present.
Click to expand...
Click to collapse
Any fix?

munimjaffer said:
Any fix?
Click to expand...
Click to collapse
Unroot and install stock recovery '-'

io_gh0st said:
Unroot and install stock recovery '-'
Click to expand...
Click to collapse
What about factory reset? Would that solve my problem?

munimjaffer said:
What about factory reset? Would that solve my problem?
Click to expand...
Click to collapse
I don't think so.

Flash a stock ROM?

Remove securitylogagent under /system/app
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
Remove securitylogagent under /system/app
Click to expand...
Click to collapse
But if I delete this system app, would I lose another function too? I mean does this app lead to another system function like SystemUI and other system apps do?
Sorry for bad English.

audit13 said:
Flash a stock ROM?
Click to expand...
Click to collapse
Hmm yes I'm thinking to go for android 4.3 now rather then 5.0.1.

Depending on the model of you phone, I'm not sure if you can downgrade to 4.3 from 5.01. If you can't, Odin should not flash the ROM.

munimjaffer said:
But if I delete this system app, would I lose another function too? I mean does this app lead to another system function like SystemUI and other system apps do?
Sorry for bad English.
Click to expand...
Click to collapse
No this won't affect any other things
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
No this won't affect any other things
Click to expand...
Click to collapse
This is really thankful

Tkkg1994 said:
No this won't affect any other things
Click to expand...
Click to collapse
And it solved my problem

Another way I observe:
Is to delete every entries Knox-related from init.rc on the ramdisk. But it only reported to work on i9500, since I'm doing the same on SM-J200G some of them still report this one.
Sent from my ASUS_Z00A using XDA Labs

[Solved]Freshly unbricked oneplus2 cant detect Sim card, wifi not turning on

I just unbricked my phone with the qualcomm tool which installed Oxygen OS but it wont detect my Sim Card and it wont turn my wifi on.
I tried to clear cache do factory reset but it didnt worked.
Any solutions? MY model is A2003

TheWolfSVK said:
I just unbricked my phone with the qualcomm tool which installed Oxygen OS but it wont detect my Sim Card and it wont turn my wifi on.
I tried to clear cache do factory reset but it didnt worked.
Any solutions? MY model is A2003
Click to expand...
Click to collapse
Follow my guide:
https://forums.oneplus.net/threads/...r-flashing-hydrogen-os-video-included.477463/

nothing solved
ashokmor007 said:
@ashokmor007
i am facing same issue and i am struck at add name setup and next is not working i just cant enable oem unlocking and i am having stock recovery and there is no signal of anything
Click to expand...
Click to collapse

sanyam mehta said:
ashokmor007 said:
@ashokmor007
i am facing same issue and i am struck at add name setup and next is not working i just cant enable oem unlocking and i am having stock recovery and there is no signal of anything
Click to expand...
Click to collapse
If u still not solved this issue u can pm
Click to expand...
Click to collapse