I purchased the head unit a few days ago and it was working fine. I attempted to root it after having trouble getting media players to detect the external SD card. The root process failed with a parsing error. Ever since then my bluetooth and WiFi will not work. Bluetooth never connects although my phone sees the device. WiFi sits at "Obtaining IP address" indefinitely. I have tried using the physical reset button on the unit, which reset some settings but did not fix the issue. At this point I think my only option is to factory reset with fresh firmware.
The factory reset under "Extra Settings" doesn't work and just stays at a screen with spinning circle saying its performing the reset and to not turn off the device.
Any help appreciated. I cannot find this firmware version anywhere.
Here is the device info:
Ordered from Amazon
Brand Name: Pupug (arrived in a box labeled Eincar)
Model Number: YH.AN271gn+WFcam3
CPU information: Cortex-A9 dual core
RAM information: DDR3 1GB
Android version: 4.2.2
MCU version: 4.3.11-7-01-690201
System information: 2.9.4_20150316
Device passwords:
Extra Settings: 123456
Developer / User Settings / Factory Reset: 7890
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was able to get this working. I downloaded the firmware here:
PHP:
https://yadi.sk/d/5vWew_Z_fWotd
Extracted 2 files to root of SD card, went to settings and ran system update. The unit rebooted and ran the update and rebooted again. I then was able to run the factory reset with the password 7890.
I now have a message across the screen "UI unauthorized please contact supplier".
Does anyone know how to remove the message? The unit is working fine regardless.
Looks like I have to root it to remove the message according to the wiki.
I installed Baiduroot and then SuperSU, but SuperSU installation fails.
I don't know how to boot the device into recovery mode. I've tried holding the home and volume buttons together on startup but nothing happens.
Any advice?
jchaos said:
Looks like I have to root it to remove the message according to the wiki.
I installed Baiduroot and then SuperSU, but SuperSU installation fails.
I don't know how to boot the device into recovery mode. I've tried holding the home and volume buttons together on startup but nothing happens.
Any advice?
Click to expand...
Click to collapse
Maybe it's the manufacturer's website, try to contact them:
.yhtcc.com/egsjj.asp?id=17[/url]
You are probably better off flashing it to a new rom.
I tried copying them to the sd card but the unit is not updating.. Did you rename the files or what exactly did u do
Try this
http://forum.xda-developers.com/showpost.php?p=61120805&postcount=7068
or this
https://docviewer.yandex.com/view/0...vaWZyYW1lIjpmYWxzZSwidHMiOjE1MDA3NzQ2MzE1Mjd9
Related
Hi,
After bricking my unit with bad firmware supplied by Xtrons to solve an audio issue, I was able to identify the manufacturer and was fortunately successful in obtaining the correct firmware for my unit.
I must say that both Xtrons and the manufacturer were extremely helpful, with HanSong delivering the result following supplying 3 iterations of firmware.
The TD699G was purchased in Dec 2015:
UI and PICs disabled due to 10 post limit -
UI Secure HTTP onedrive.live.com/redir?resid=E0D3E5F304707013%211438
Version/SYSinfo secure HTTP onedrive.live.com/redir?resid=E0D3E5F304707013%211437
DVD Version: C07-08 MCUVER: hanSong150714FA---C
System: Windows CE 6.0
BootVer: M3-265M-150801-08-B-V1.0.0
OSVER: M3-265M-150801-08-CE6-V1.0.0
APPVER: 20150723-Ver1.1.1-HZC_2531_UI23_MT_ZY
Flashsize: 256M
UUID 00EC7472-D9A2-3835-3336-303805050C0E
Notes from my experience:
1. Use the 4GB SDCard supplied with the unit, [FAT] formatted and named [SDCARD]
2. Copy the file [UPD] to the SDCARD first, then the remaining files
3. Insert the SDCARD into the [MAPS] slot and power on. Wait for the flash/app upgrade to complete, approx 3 minutes.
4. If the update completed successfully, you will be presented with the display calibration screen. Calibrate the display
5. Factory settings - configure your unit appropriately in the hidden menu [when in main menu,long press the TIME on left. TD699G then will enter the factory setting interface, click next page, close the selectGPS option,then press the power button to shut down the unit - do not remove power. This last step applies factory settings and configures the unit for GPS. Review other settings.
While I have included all firmware supplied, the firmware that restored my unit is [升级APP-2015.12.12-works.RAR]
Firmware: Secure HTTP onedrive.live.com/redir?resid=E0D3E5F304707013%211429
https://onedrive.live.com/redir?resid=E0D3E5F304707013%211429
I hope this helps someone, as the XDA forum has been extremely helpful to me.
- marchnz
Firmware
Hi I am having similar problems with my td699g , can i ask the firmware you posted seems to be for a toyota vehicle and the background "wheel" is orange, you image of the UI is blue, is there a way to change this back and remove the toyota boot up symbol , its not the standard logo. Your help would be appreciated
Thanks
Michael
michaelg1821 said:
Hi I am having similar problems with my td699g , can i ask the firmware you posted seems to be for a Toyota vehicle and the background "wheel" is orange, you image of the UI is blue, is there a way to change this back and remove the Toyota boot up symbol , its not the standard logo. Your help would be appreciated
Thanks
Michael
Click to expand...
Click to collapse
Hi I don't know if it will help you, but maybe someone else will face the same Problem as we did. I solved the ugly orange color wheel and the inverted colors with these steps:
1. Go to the Menu, press and hold the time for more than 5 seconds.
2. Press the "Next Page" button.
3. Press "ScreenSelect" button.
4. Select "SCREEN_7_INCH".
5. Go back and hold the Power button 3 seconds, the device will turn off, wait a moment and Turn it back on.
After these steps your Device should start with normal colors and the Blue wheel!
PoC:
Before
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After
Can we root our windows phone without pc??? Tell me
Need Help with my TD619G
Hi, That's really help full and I'm gonna try it on my unit.
Problem is my unit is a TD619G not a 699... mine is touch screen but with buttons on the side as well.
I can't find anywhere the firmware for a TD619G...
History... i updated the "iGO Primo" GPS maps via the SD card and after cycling the power, was left with a blue screen requesting a FytAppUpdate.bin flie... this file was not in the update.
I can access the winCE6.0 screen on the unit using the touch screen but it times out before i can get to far.
If anyone can help in anyway... please do
Hello wonderful people, here is my drama:
yesterday I updated my Xiaomi Mi A1 (tissot) with Android ONE to V10.0.24.0.PDHMIXM from the Android system menu. Android downloaded the update, rebooted, installed it and since then I can no longer access my phone, it is stuck at boot time showing the message:
Can't load Android System. Your data may be corrupt.
- Try again
- Factory data reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I no longer care about this phone, but only about all the data that I have inside, photos since more than 2 years (I know I am super stupid for not making backups, I am feeling like trash right now), so factory reset is not an option because will destroy and re-encrypt the /data partition which is what I want to mount in the PC.
What I tried:
- I accessed Android Recovery and launched "Apply update from SD card" for installing again the same version miui_TISSOT_V10.0.24.0.PDHMIXM_bcbbe1fad4_9.0.zip but after launching the install it shows the message: E:Error in /sideload/package.zip (Status 1). Installation aborted. and does not solve anything.
The current status of my phone:
- I can not boot into Android, but I can access the Android Recovery and fastboot screens
- I am a normal user, so I never activated hacker options, so I have:
-> Default bootloader that came with the phone
-> No root access
-> No USB debugging option activated
-> No Developer options activated
I have read a lot of tutorials on the Internet and posts in this forum about recovery with tools like adb and fastboot, but all seem to need one or many of the hacker options activated in order to work.
Is there guys anything that I can do for activating the hacker options and then trying something else to mount /data in my PC or boot Android?
Thanks so so much in advance.
Hello all,
I am not a professional but still ambitious and would like to solve the existing problem
Since my English is not perfect, I use a translator, sorry if some written is not understandable.
Coming to my problem.
I bought 2 years ago from Aliexpress from a reputable seller an Android. 8227L YT9213A
From the beginning, the device was very slow or lost the GPS data.
original firmware was YT9213A_00009_V001_20200408
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
before the failed firmware update
As a result, the seller sent me a firmware "xyauto_ui1_9213A_full_8227L_demo-ota-20200517". I copied it to a USB stick (rar file not unzipped) and successfully performed an update via the radio menu "Android Update".
Over time, however, I noticed that the navigation "google maps " always crashed. also lost the gps data.
about the playstore to update the apps brought no success. the problem was in my opinion on the android system,
it was still slow and not fun at all.
I have now contacted the seller again and informed him about the problem.
he sent me a new firmware "gongban_YT9213A_ui1-hw-ota-v6.5.zip".
after some research i found the XY Auto firmware download page.
XYAUTO
file manager
file.xygala.com
there I found exactly the same firmware what the seller sent me.
I copied the firmware zip file to a USB stick and tried again to update the firmware via the radio menu "Android Update".
Unfortunately, an error occurred, I have repeated the process several times. tried different USB sticks but it always came to the same error.
I think that this firmware what the seller is not compatible with my device at all.
I have on the http://file.xygala.com site then a previous firmware and that is
"xyauto_ui1_9213A_full_8227L_demo-ota-20200523.zip" downloaded and copied the USB stick and again through the device menu" Android update" performed.
This time I noticed that it did not come to an update abort. it came the message 1 of 53 apps are updated, but at "23 of 53" it froze and the system was rebooted, then the installation continued "1 of 9 apps" are updated. Finally the message came, "Update complete".
then the system was rebooted but the startup screen froze, the touch did not work. the image distorted and after a few seconds the system was rebooted again. this phenomenon repeated itself again and again. so to say "boot loop effect"?
then i started to research on youtube saw some videos how the firmware was updated with flashtool. i wanted to copy it. I downloaded the "Scatter-loading file" from the firmware folder the seller sent me "gongban_YT9213A_ui1-hw-ota-v6.5.zip" ( but I downloaded the same firmware for PC update from the http://file.xygala.com site
downloaded) and loaded and thus tried to flash. the " preloader " in the first row was not activated. the hook was missing. manually I could not click either.
Then I tried to load the "scatter-loading file" from the previous firmware "xyauto_ui1_9213A_full_8227L_demo-ota-20200523" and flashed " Format All+ Download" it started to load at the bottom of the bar but then came an error message.
So now I think I have made things worse.
Now the screen stays completely black. Android loading process I do not see. I see short flickering but it remains black
The seller only answers when he feels like it and doesn't really help me.
It would be a shame to throw it away. I don't think it's a hardware problem.
Can anyone really help me from afar and give me a tip.
I would follow any instructions and try to revive the device.
thanks in advance and hope someone will help me.
Do you have a 'Preloader' file?
Dont do formatting without 'preloader' file.
You can only do a downloading without this file. I dont know why flashtool even let you do this step without all files included....
Im using this version: sp-flash-tool-v5-2112
Then get the 'preloader file and use with package 'xyauto_ui1_9213A_full_8227L_demo-ota-20200523' you've got. Do format wit all files included/selected.
hello guys i have this head unit and i really want to change the firmware .interface ugly and aux deosnt work no sound equilizer ....
any suggestions plz
hello, i have a chinese car radio ff-5000 8227L, i installed avg anti-virus, then i activated the screen lock via this antivirus, please how can i deactivate the screen lock ? THANKS
Hi all
I have one of these https://www.ebay.co.uk/itm/384770479698 in my 2006 Merc. its a MTK8667 Android 11 based unit. FF_866X is the device name, i'm sorry I do not know the MCU
I was sent some update files from the seller https://we.tl/t-UeDC40i6Ul XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223
Upgrade steps
1) Unzip after downloading (only unzip once)
2) Copy the file to the U disk
3) Connect the U disk while the power is on
4) The machine will automatically upgrade
5) If the machine cannot be upgraded, you need to press RES and keep touching the display with two fingers
during the update process it copied the superimage ok but then something came up in red but it came up to a kind of recovery and said erasing... it then rebooted it gets to the car logo screen, before android screen then goes to a blank screen with the following in bottom left corner...FASTBOOT MODE and wont go any further
I have pressed RST then two fingers on screen until i get "detected" but all i get is the same fastboot mode again,
I have redownloaded and extracted the firmware and reformatted my usb drive to fat32 and tried the whole process again and tried in both usb slots but no sucess...what can I do?? is it broken??
I have obtained other mtk8667 firmware files 8667.bin and 8667.upd from this topic https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/ on this forum but I have tried many different ones and it just wont read the usb, still just goes straight to fastboot mode....is anyone able to help me I have messaged the seller but no reply
So far I have tried about 7 or 8 different firmware versions, the sellers own, some junsun versions, ossuret versions even xtrons versions(all in correct format of 8667.bin and 8667.upd on root of usb formatted to fat32 but it does not read the usb.
The usb slots are still working as I can plug my phone in and it charges but the unit does not seem to have a full recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have messaged the seller (brogotek) on ebay but no reply as yet which is strange as they have always replied very quickly.
Do you think it is fixable? it was bought in April and ebay advert states it comes with 12 months repair or replace warranty
There just seems no way to get into any kind of recovery mode
Hi
i have a mecool m8s pro i have tried to find a way to re install the latest firmware to update my box which hasnt been up dated since i bought it about 2018
i have googled the firmware but if i try to download it my pc says its infected .
could anyone please point me in the right direction
the box is 3 gig ddr4 ram and 16 gig storage the cpu is the arm cortex A53 S912 gpu MaliT820
many thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why do you think there exist update for this tv box?
What you need is custom ROM like this.
[ROM] Aidan ROM [v9] [Netflix] [Prime Video] [Disney+] [S905X-S905W-S912-S905X2-S905Y2-S905X3-S905W4-S922] [Google Play Certified] [ATV 9]
Home Screen With Apps ^^^NEW Home Screen, Update From Play Store ^^^ Preinstalled Apps Initial Set Up Screen Initial Set Up Screen 2 About New Google Dream X Included Google Play Protect Certified This is My Android 9.0 Firmware, This...
forum.xda-developers.com
Thank you will try this rom
just tried to flash this rom and everything looked ok but when it boots up is says aidens custom rom then just hangs on a black screen with Android tv on tried to re flash but now it wont connect to my pc ?
guess you need to format userdata (aka factory reset) do you have access to fastboot/bootloader mode or recovery mode?
no tried holding the reset button when powering up but nothing happens
it wont even show anything on the screen now the remote control wont turn it on and off
remote only works on booted android. connect usb to PC and check the VID/PID in device manager (or lsusb linux)
the box wont show anything on screen now and wont connect to pc
januaryish said:
the box wont show anything on screen now and wont connect to pc
Click to expand...
Click to collapse
think ive done the door stop mod
what is the output of lsusb for every port?
cant get the box to connect to pc nothing happens no sound to say its connected
started device manager with it plugged in but nothing shows up ?
you should at least get to the previous state splash screen as of post #4. did you power off completely? as last resort there is a method with short-circuiting pins for flashing mode. search for AmLogic bricked boxes recovery.
Yes I have tried all ways to connect but nothing on pc or screen
Will try brick recovery