Database Users

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

[Q] Generic Tablet Problem (Android lying on his chest, doesn't matter what I do)

Hi, I'm not sure if I posted in good thread category, since I couldn't find a thread for my tablet, maybe I should explain why I posted in here:
It's a Generic tablet 703H I suppose, but I'm not sure if that's the model, it is running "Full AOSP on Rk29sdk" I suppose, (at least that's what AnTuTu benchmark told me before) I rooted the device using this and it WORKED, but when I decided to go into a recovery mode (I wanted to install CWM from here) but when I run my tablet with POWER and VOL+ (so I could enter STOCK recovery IF THERE IS ANY) all I got was an android lying on his back with opened chest, since that I can't do anything on it, I turn it off and on but nothing happens, I tried every keys and nothing helped. And when I plug the tablet so it will charge, I do not get battery animation, but yet again the same screen. But later I spotted that before that shows up it flashes with standing android with something blue spinning in his chest (Is it download mode maybe?) So I decided to plug the tablet to my laptop and see what happens. Before it was recignized as "Full" (ADB Drivers which I used to root) but now it showed up for a while as something about Nexus (not sure it google or galaxy) tablet. I am confused because now it again shows as Full. I wanted to flash it because it lags terribly (Android 4.0.4, kernel 3.0.8) and it bugs a lot (like "return" key was staying as "down" key)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it's not the correct thread category please move it, I didn't find correct place for it by myself
I understand this is not Nexus tablet but still this is what USB drivers installed on my Win7 flashed me about
If it helps - I can use Ubuntu (most of things about computer I do through Ubuntu, yet never about any external devise)

Problem Solved
Fixed tablet with a bootable SD card, if it's needed I can post how I managed to fix it.

[HELP] AOSP on RK29SDK FULL BRICK
...

KKMOON FY6303 stuck in boot loop

PHP:
Hi, I have a KKMoon FY6303 Android 6 head unit. The unit worked for a week and now boots to startup screen and I get a red message saying the unit has not started for 3 times and it is going thru internal test for startup. Then screen goes blank, I hear the DVD drive start for a second, then a pattern of nothing followed by the DVD drive start every 15 seconds or so. I have pushed the reset button at various times and no change. There are no more buttons to get into recovery mode just the small remote. Is there a way to reload Android 6 from somewhere and try a new install from USB drive or sd card? My friend has the same unit. Is there anyway to make an Android 6 install USB drive or sd card from his working unit? Any help will be appreciated. Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Any thoughts or suggestions are appreciated!

Had the same issue. The HU (with 2 USB ports) was some unknown brand called Funrover loosely based on Joying firmware. What worked for me was
- Download the suitable Joying firmware : joyingauto.com/blog/post/joying-intel-sofia-android-car-stereo-software-update
- Extract it on the PC and then copy the firmware files on to a freshly (FAT32) formatted USB drive (or SD card if you don't have a secondary USB port)
- Plug in the USB drive to your HU USB port (1?) or SD Card to the SD Card slot (or Map slot?)
- Since your HU is already bootlooping, plug in a keyboard and use the following key combination> Alt + Print Scr + tapping i (or e, both worked for me) to get in to recover
- Ideally the recovery option will detect the plugged in USB and start reflashing the firmware so that you will be able to use the HU again.

Did u found a firmware for this unit?
JakeKelly said:
PHP:
Hi, I have a KKMoon FY6303 Android 6 head unit. The unit worked for a week and now boots to startup screen and I get a red message saying the unit has not started for 3 times and it is going thru internal test for startup. Then screen goes blank, I hear the DVD drive start for a second, then a pattern of nothing followed by the DVD drive start every 15 seconds or so. I have pushed the reset button at various times and no change. There are no more buttons to get into recovery mode just the small remote. Is there a way to reload Android 6 from somewhere and try a new install from USB drive or sd card? My friend has the same unit. Is there anyway to make an Android 6 install USB drive or sd card from his working unit? Any help will be appreciated. Thanks in advance.
Click to expand...
Click to collapse
Did u found a firmware for this unit?

[TOOL] - FYT Backup tool for UIS7862 and SC9863A chip based headunits

Hi fellows, this is a script that help users owning an Android 10 FYT based platform car headunit to take a deep backup of their original APK files before attempt to modify the headunit contents.
1-) Uncompress the contents of the FYTBackup.zip file in an USB pendrive (root folder)
2-) Insert the pendrive in your Headunit us port
3-) Wait until it restarts automatically and end the backup process.
4-) Remove the usb pendrive once you see a green message in the screen.
Note: If you see a red message, it means that you don't have a 360 camera system in your Headunit, don't care about this as the backup will be made anyway.
Cheers.

Hi,
I tested the tool on my Ekiy 7T.
It didn't work there. It came only briefly the Android lying on the side with the exclamation point and then the radio reboots.
Did I miss something?
Greeting Mario

hoffeck01 said:
Hi,
I tested the tool on my Ekiy 7T.
It didn't work there. It came only briefly the Android lying on the side with the exclamation point and then the radio reboots.
Did I miss something?
Greeting Mario
Click to expand...
Click to collapse
Is the Ekiy 7T a FYT based unit ?,
What processor ? UIS7862 ?

Yes it is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I replaced the file with a new version, download it again, uncompress and put in a FAT32 formatted USB pendrive, plug the pen and take a photo when booting

Thank you very much. I'll try it later and report.

It seems to have worked.
On the stick there is now a folder called "FTYBACKUP" (350Mb)

Niiiiice fellow you did your backup !

After finish where ifound backup

Thank you mariodantas for this tool ! I will try it tonight
By the way, how to install the backup in case ?

Hi fellows, I will maybe improve the tool to be able to restore backup but I thinks that you can find a better tool HERE

Bro how.much full versione

I tried to backup my radio and I couldn't!!
I downloaded a new link and it has all these files which one should I use!

Mecool M8s Pro 3GB/16GB how to update

Hi
i have a mecool m8s pro i have tried to find a way to re install the latest firmware to update my box which hasnt been up dated since i bought it about 2018
i have googled the firmware but if i try to download it my pc says its infected .
could anyone please point me in the right direction
the box is 3 gig ddr4 ram and 16 gig storage the cpu is the arm cortex A53 S912 gpu MaliT820
many thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Why do you think there exist update for this tv box?
What you need is custom ROM like this.
[ROM] Aidan ROM [v9] [Netflix] [Prime Video] [Disney+] [S905X-S905W-S912-S905X2-S905Y2-S905X3-S905W4-S922] [Google Play Certified] [ATV 9]
Home Screen With Apps ^^^NEW Home Screen, Update From Play Store ^^^ Preinstalled Apps Initial Set Up Screen Initial Set Up Screen 2 About New Google Dream X Included Google Play Protect Certified This is My Android 9.0 Firmware, This...
forum.xda-developers.com

Thank you will try this rom

just tried to flash this rom and everything looked ok but when it boots up is says aidens custom rom then just hangs on a black screen with Android tv on tried to re flash but now it wont connect to my pc ?

guess you need to format userdata (aka factory reset) do you have access to fastboot/bootloader mode or recovery mode?

no tried holding the reset button when powering up but nothing happens
it wont even show anything on the screen now the remote control wont turn it on and off

remote only works on booted android. connect usb to PC and check the VID/PID in device manager (or lsusb linux)

the box wont show anything on screen now and wont connect to pc

januaryish said:
the box wont show anything on screen now and wont connect to pc
Click to expand...
Click to collapse
think ive done the door stop mod

what is the output of lsusb for every port?

cant get the box to connect to pc nothing happens no sound to say its connected
started device manager with it plugged in but nothing shows up ?

you should at least get to the previous state splash screen as of post #4. did you power off completely? as last resort there is a method with short-circuiting pins for flashing mode. search for AmLogic bricked boxes recovery.

Yes I have tried all ways to connect but nothing on pc or screen
Will try brick recovery