Database Users

How to cardflash with hareld?

Hi
does anyone know how in need to call the "ARTEIMG.nbh" with the hareld when I am using this manual:?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).(not necessary, do it only if 1st attemt fails)
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
SuperCID devices are able to flash any NBH image using this method.
Click to expand...
Click to collapse

some few more question
witch of these files do I need to give the name???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does nobody has experience with this???
I really need to do this so I can send it to repair...

haha problem solved.
In someway my phone was able to connect with my pc with a broken usb. haha
In bootloader mode it just worked

Why do you want to update your rom this way?
It is much easilier with the HARD-SPL or USPL.
Look a bit around the herald forum and you will find these methods!!!

Yes I know but my usb connection in my phone broke down, so i need to send it to repair.
But i had the touchit rom on it, so with that rom I didnt had any garantee

HELP! Problematic WM6 rom load. Phone inoperative

Hi everybody. I'll try to brief 2 days of an unsucessful rescue operation. I have a XV6700 by Verizon, Tried to flash the WM6 Verizon rom first. My BL version was 2.05, so I had to downgrade to the 2.02. I followed step by step on some guy's post on PPCgeeks. the operation got messed up somewhere in the middle and my nightmare started right there. When flashing the NOID rom to the phone, it gave me an error and now it won't take back the OEM AKU 3.3, it says, WRONG DEVICE, this application is not made for your device. So I forgot about the OEM, tried to COOK a custom rom using kitchen, the only one that the phone will accept is the one with RUU - NO ID and Carrier Generic or Verizon, the ROM flashing process starts at STEP 3! it doesnt do radio upgrade , it starts right on "Upgrading CE..." and at 99% it fails. the phone then, boot ( weird boot screen, pixels, colors, lines ) followed by a blank ( white ) splash screen. and thats it. So i managed to find a GENERIC version of the WM6 already compiled. That one gives me the same error, error 112 ( see picture ) at 99% and boots with the same weird boot screen, blank splash, but this time it does show partial WM6, i can access programs, answer call, messaging etc. but it shows overlapping fonts, and the Dialer is tottaly blank. I tried installing more than 10 different dialers, but the phone screen is blank. Now I need help. I am afraid to make it worst. what could be wrong? My BL shows 2.02 .... but using the mytty software and punching task 28 55a ( as explained on the downgrade procedure ) it doesnt show what it's suppose to show. Heeeeelp!! Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

HTC hero bricked .help.....

I bought my HERO just a few days ago.
Once,the system halted and I took the battery out of the phone.
After that,when I turn on the phone,it show the first picture in the attachments
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then only when I press the DIAL button ,the phone responses,and it shows the second picture in the attachments
I have checked that the buttons of the phone are all OK.
And I have sent it to someone to mend it,he said that the phone can not be connected to the computer,but he succeeded in flashing it with the miniSD memory card. BUT the phone still has the same problem.What's more ,the H-BOOT has been flashed by him from 1.76.005 to 1.76.007. But the problem still
exist....
Can anybody help me?...
And I'm from China,my English is not very good...

This might help...
g0mib0y said:
EDIT: DON'T UPDATE TO 2.1 AGAIN SINCE IT WILL HANG ONE MORE TIME. WAIT FOR HTC TO RESOLVE THIS ISSUE!!!!!!
EDIT 2: BACK UPP ALL YOUR DATA FROM YOUR MEMORY CARD FIRST!!!
EDIT 3: How did I find this out? I talked to a very helpful HTC suport rep (yes they do actually exist in Sweden). He helped me do these steps and so I thought I should share this.
Ok so you got a message that 2.1 was available for your Hero - FINELY! and you installed it using OTA. And then you got a triangle with a ! in it and you rebooted and all it says is "HERO".
This is how to solve it!
Take out your memory card. FORMAT TO <span style="font-weight:bold;">FAT32</span>!!!
Download the RUU 2.73.405.5 from HTC support homepage
Run the installation.
When it fails to find your phone <span style="font-weight:bold;">DON'T EXIT!!!</span>
If you are using Windows 7 go in to c:\Users\<span style="font-style:italic;">yourusername</span>\AppData\Local\Temp
Search for ROM.zip
Move to desktop
Rename to HEROIMG.zip
Transfer to your newly formated memory card now with FAT32 file system
Put memory card into phone
Start phone holding volume down pressed.
It will now check zip fil and then ask if you want to install.
homekey for YES
After installing you have 1.5 again and can safely upgrade to 2.1 OTA
Click to expand...
Click to collapse

Fastboot says "flashed" but nothing changes.

Hello. Some time ago I flashed stock rom ALE-L21C22B160 and I got blank page in "Motion control" so I went to Huawei site and I downloaded C432B170. Then I extracted boot, recovery and system, then I flashed it without any problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I simply did "fastboot reboot" and my device rebooted with the old firmware, nothing changed at all.

I think you also need to flash to Cust.img

EpicBas said:
I think you also need to flash to Cust.img
Click to expand...
Click to collapse
Thanks, it worked, but I can't get proper firmware, I'm always getting one of those:
- blank "Motion control" page
- phone getting into rescue mode due to some problem with boot.img
Can you give me a link to firmware that actually works and has motion control? Thanks.

Lotherad said:
Thanks, it worked, but I can't get proper firmware, I'm always getting one of those:
- blank "Motion control" page
- phone getting into rescue mode due to some problem with boot.img
Can you give me a link to firmware that actually works and has motion control? Thanks.
Click to expand...
Click to collapse
@Lotherad Try one of these which matches your phone http://huawei-updates.ru/ALE-L21.html

EpicBas said:
@Lotherad Try one of these which matches your phone http://huawei-updates.ru/ALE-L21.html
Click to expand...
Click to collapse
It says "Attention! Please update system again Error! Func NO : 11 (recovery image) Error NO : 2 (load failed!)". Oh man, is there any hope for me? :crying:

did you unlock the bootloader ? and enabled USB bedugging ? ( sorry if it's stupid question )
any way , here is a thread that you do not need to flash with fastboot via commands ( C432B052 Rom version ) , it will automatically do the job , and i think it would work fine for you , and also if you want to have marshmallow , you can simply follow the reste of the thread
Link : http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html
good luck

A way to unlock hardbricked Meizu Pro 5 ?

Hi,
I've hard bricked my Pro 5. No recovery access, no boot to rom, locked bootloader. After many search i see this : https://forum.xda-developers.com/meizu-pro-5/how-to/meizu-customer-service-flash-tools-save-t3447678, but this is bull-****.
I test many manipulations to get something on my phone other than "Bootloader, Locked".
So i dicovered this : Press and holp Vol + and Vol - and press one time power button. We get this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After research about this, we get this :
http://forum.gsmhosting.com/vbb/f777/galexy-s6-exynos-7420-dead-1975230/#post12369382
And this :
http://www.mediafire.com/file/9qmezaezy1fyzrr/Galaxy_S6_Boot_recovery.pptx
Possible way to unlock hardbricked Pro 5 ?
Same way exist for Qualcomm Processor : http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/

Subscribed, i do also have a spare "bricked" device

same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx

barbonee said:
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
Click to expand...
Click to collapse
Hey there. Got the same problem. Tried everything. Nothing happens. Have you got your problem solved yet?

The same problem
Sent from my PRO 5 using Tapatalk

Only way to solve this is taking the phone to technical service. Done it myself. Be careful tought, they will try to make you change the entire mother board (280€), but if you insist they will "find a way" to install the correct software in your phone and leave it as if it was new

it is possible to recovery via dongle ... but sn and imei can be lost

Try this thread.
https://forum.xda-developers.com/me...hard-bricked-lost-t3838461/page2#post79752427
Try this thread; it worked perfectly for me.