Database Users

need help i900 problem!!!

hello sir
i have big problem
my i900 power on but no network, always show cross to tower
[i think not detect sim].
and if i want to see imei it show "the phone is currently off.would you like to turn on the phone?"
then option yes/no but if i press yes not happean any thing.
if i try to reset phone by setting>system>hard reset> there is 2 memory
1>main memory ( reset tap is enable)
2>my storage (not enable reset tap)
if i try main memory reset it need password 1234 i enter 1234 then it show this error "when phone is turned off,you cannot hard reset.turn phone on,and try again"
key combined hard reset not work. soft reset work but same.
please ! please !! please !!! need help.
how to revive this phone normolly???

Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!

rtomakov said:
Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!
Click to expand...
Click to collapse
thank you for reply but i am new about this.
can you give me COMPLETE (phone,pda and csc) new ROM, official ???
and how to ???
thanks.

Look here fore official ROMS:
http://www.samsungmobile.com/support/omnia/index.jsp
Manuals about flashing omnia (good ones) you should search on modaco
web site. They have very good omnia support.
Short version: install activesync, all drivers for omnia and run .exe of firmware update from PC.

install active sync 4-5,
install modem driver.
restart pc
but it hang on this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i use on xp[32 bit]
how to solved??

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

[Q] Pattern Lock on 2nd hand Flipout?

Hi all,
I bit the bullet and picked up a 2nd hand OrangeUK Flipout (details available if I need to prove I bought it legally)... but the seller cannot remember the pattern to draw to access the phone.
How might I resolve this issue, please?
I can access the Bootloader, which is on v91.10, but that's all I've found so far.
I have found RSD Lite v5.6 and the USB Drivers from the MotoDev website.
Will flashing RUTEM_U3_01.19.2 (or any other RUTEM) onto the device ie following the Debranding Guide, reset this and allow me to start playing with Android?
What about the FlipOut Recovery?
Thank-you,
Dylan.

Wow. Err, okay, I wasn't expecting it to be that easy.
It only took a simple Hard Reset and it's fine - Back to the start as if seting up a brand new out-the-box phone!
In case any other fellow Noobie-Noobs encounters this issue, here's what I did:
Motorola Flipout (MB511) - Step by step hard reset
1/. Switch the device off - Hold the power button for a couple of seconds and then press Power Off
2/. With the device off, open it up, hold the X key and hold down the Power button until you see the Motorola M.
3/. Shortly after, an image like this will appear:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4/. TAP the power button to enter the Android System Recovery menu.
5/. Use the little D-Pad to select the 4th option - Wipe Data/Factory Reset.
6/. Press Enter to confirm.
7/. Confirm you want to reset the device.
8/. After the reset, go back into the System Recovery menu and select the 1st option - Reboot.
You should now have one factory-fresh phone!
Gratefully translated from Portuguese instructions at the EIL forum!

Fastboot says "flashed" but nothing changes.

Hello. Some time ago I flashed stock rom ALE-L21C22B160 and I got blank page in "Motion control" so I went to Huawei site and I downloaded C432B170. Then I extracted boot, recovery and system, then I flashed it without any problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I simply did "fastboot reboot" and my device rebooted with the old firmware, nothing changed at all.

I think you also need to flash to Cust.img

EpicBas said:
I think you also need to flash to Cust.img
Click to expand...
Click to collapse
Thanks, it worked, but I can't get proper firmware, I'm always getting one of those:
- blank "Motion control" page
- phone getting into rescue mode due to some problem with boot.img
Can you give me a link to firmware that actually works and has motion control? Thanks.

Lotherad said:
Thanks, it worked, but I can't get proper firmware, I'm always getting one of those:
- blank "Motion control" page
- phone getting into rescue mode due to some problem with boot.img
Can you give me a link to firmware that actually works and has motion control? Thanks.
Click to expand...
Click to collapse
@Lotherad Try one of these which matches your phone http://huawei-updates.ru/ALE-L21.html

EpicBas said:
@Lotherad Try one of these which matches your phone http://huawei-updates.ru/ALE-L21.html
Click to expand...
Click to collapse
It says "Attention! Please update system again Error! Func NO : 11 (recovery image) Error NO : 2 (load failed!)". Oh man, is there any hope for me? :crying:

did you unlock the bootloader ? and enabled USB bedugging ? ( sorry if it's stupid question )
any way , here is a thread that you do not need to flash with fastboot via commands ( C432B052 Rom version ) , it will automatically do the job , and i think it would work fine for you , and also if you want to have marshmallow , you can simply follow the reste of the thread
Link : http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html
good luck

SM-A510F : Forgotten lock pattern

Hey guys,
I'm posting here as a last resort before a factory reset.
By the way, let me first say that I'm sorry to post this here, as I know it's SO stupid, what's happening.
I had the same lock pattern for 2 years now, never had a problem.
Last week, it just fell out my mind completely. I've been trying for 4 days straight to remember it.
It's quite a complicated one, with the pattern tracing deactivated so I can't remember the shape and my thumb tried with its motor memory but to no avail :x
The thing is, I extensively use the notepad stock app (Samsung Notes ? Android Notes ?) and I have a **** TON of info I REALLY don't want to lose. And it's not on the SD card, ofc.
I don't care much about the rest, to be honest.
Fun fact, I only synced contacts via the android sync function.
So how can I either remove the lock pattern or access my phone files with an explorer on my computer (I guess I can find a memory file for the notepad somewhere), knowing that :
- Not rooted
- USB debugging not activated
- Not registered with Samsung account
- Android version is the latest available in France for an SM-A510F as I do all updates
I can provide as much as I can to prove my ownership of the phone if needed.
Thank you for reading and maybe for helping.
You have absolutely every right to laugh to my (dumb) face.
EDIT :
Just tried something else. Booted in recovery to try an ADB command.
Since Windows didn't recognize the phone in recovery mode, I selected the option "Load package with ADB" or something like that.
Now the phone was listed in devices on ADB and I tried this : adb shell rm /data/system/gesture.key
Result : error.
Great.
So since the phone was unresponsive to any button, I waited and there was a timeout on the package load.
BUT NOW...
I have a blue screen that says "Error!" and it's completely unresponsive.
GREAT.
I'm off to work, read you soon.
XOXO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<Mod Edit>
Thread closed by OP request.