Database Users

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

[Q] Seems like phone is hanging while ROM installation

Hi,
I followed carefully all instructions for ROM installation from this thread:
http://forum.xda-developers.com/showthread.php?t=2059651
All went fine until ROM installation. I have chosen rom (zip) file and pressed install.
You can see what happends here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when I turn on some more logging I get this message:
e: opening /res/keys: no such file
Click to expand...
Click to collapse
I re-dowloaned this rom again and it did not help.
I tried 3 more roms and always there is same situation.
PC says that Phone drivers are upto date.
There were NO errors in the meantime.
I have re-installed CWM but it did not help either.
Someone has any ideas about it?
regards
katwit

Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?

Hi IPlasm
iPlasm said:
Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?
Click to expand...
Click to collapse
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit

katwit said:
Hi IPlasm
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit
Click to expand...
Click to collapse
So you have tried the latest ROMs,
after "opening package" written, you should be able to see "Installing..." with Title "Phonerty" on my ROMs. and at least it just takes 5 minutes.
If not shown, then the Zip must be corrupted while downloading or your SDCard can be unclean or damaged microSD, try to format your SDcard FAT32. or you can even Partition that will format your SDCard in the Recovery on your Phone!, go Advanced and partition, after completing that, you can copy your ROM zip files via USB at recovery Mount options.
after installing, you must Installation completed... then Manually restart your phone.
Have a nice try

Worked!
Dear iPlasm!
Many thanks - it works fine. Many thanks again!
regards
katwit

A way to unlock hardbricked Meizu Pro 5 ?

Hi,
I've hard bricked my Pro 5. No recovery access, no boot to rom, locked bootloader. After many search i see this : https://forum.xda-developers.com/meizu-pro-5/how-to/meizu-customer-service-flash-tools-save-t3447678, but this is bull-****.
I test many manipulations to get something on my phone other than "Bootloader, Locked".
So i dicovered this : Press and holp Vol + and Vol - and press one time power button. We get this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After research about this, we get this :
http://forum.gsmhosting.com/vbb/f777/galexy-s6-exynos-7420-dead-1975230/#post12369382
And this :
http://www.mediafire.com/file/9qmezaezy1fyzrr/Galaxy_S6_Boot_recovery.pptx
Possible way to unlock hardbricked Pro 5 ?
Same way exist for Qualcomm Processor : http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/

Subscribed, i do also have a spare "bricked" device

same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx

barbonee said:
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
Click to expand...
Click to collapse
Hey there. Got the same problem. Tried everything. Nothing happens. Have you got your problem solved yet?

The same problem
Sent from my PRO 5 using Tapatalk

Only way to solve this is taking the phone to technical service. Done it myself. Be careful tought, they will try to make you change the entire mother board (280€), but if you insist they will "find a way" to install the correct software in your phone and leave it as if it was new

it is possible to recovery via dongle ... but sn and imei can be lost

Try this thread.
https://forum.xda-developers.com/me...hard-bricked-lost-t3838461/page2#post79752427
Try this thread; it worked perfectly for me.

[HELP] TWRP One Plus 5 Not working

SOLVED UPDATED TO LAST OTA AND DID THE WHOLE TUTORIAL AGAIN.
Tried different USB ports. ( 3.0 / 2.0 )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Tried in 2 different PCs and 6 usb ports 2.0 and 3.0
Windows 8 and windows 10.

Have you tried using cmd (administrator) istead of PowerShell?

Lamizure said:
Have you tried using cmd (administrator) istead of PowerShell?
Click to expand...
Click to collapse
Yes

It's really strange... Have you unlocked the bootloader?

Yes " Device State - Unlocked "

It's due to the filename being too long. I found a different fastboot which allowed long filenames. Rename it to one letter like r.img or something and see if it works.

Had exact the same problem under Linux
People mention to change to another USB port but that did not help
What helped... if all stuff is correctly installed (adb, root rights, etc.)
1. Reboot into the bootloader (even if you are in already)
adb reboot bootloader
Click to expand...
Click to collapse
2. Then directly (use the arrow up key to really be fast enough) send the command for flashing (my file was called twrp.img)
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
If this doesn't work you could try (under Linux) to write a little script with just the two above commands or try
adb reboot bootloader && fastboot flash recovery twrp.img
Click to expand...
Click to collapse
It seems to be a timing problem... One might need to play around with the time between this two commands. E.g. wait until the bootloader screen is on the phone and directly issue the flash command. Sorry after it worked for me I did not bother to investigate it in more detail.

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?