Database Users

white screen with small colored lines

hi every one. I have a qtek s200 and I have a white screen problem. I don't know why one shiny morning my qtek appear with a white screen. First I think that was the screen and buy a new one. after replaced I turn it one with the new screen the screen seams equal :s After that I made a lot of search and did some thinks like install Active Sync. The active Sync does not detect my phone.. I install the last versions but nothing appear.. when I plug the phone on computer with USB cable nothing is detected by computer but if I press photo+on button it detect a "windows Ce usb device" and nothing appear on active Sync.
I already try reset using style and nothing. I try to update using PDAMobiz_Prophet_WM6_V1.00_Step1 (ROMUpdateUtility_NV_G4.exe). It finish and I get the message that was successful updated. And if I try to update it again appear the same screen saying that don't have a version (see the printscreen). I never see the 3-colour menu :s it just don't appear.
Any one one what I have to do to play again with my phone?
Thank you very much. Best regards.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
printscreen http://img217.imageshack.us/my.php?image=73046337ny4.jpg

Recovery
http://forum.xda-developers.com/showthread.php?t=401326
If at any stage your Prophet fails to start properly or can only enter bootloader follow this:
* Download and install the latest version of ActiveSync (Google for it)
* Download and unzip an AKU2.2 (No Vendor) ROM for the Prophet-any AKU 2.2 will do-from [here | ftp://xda:[email protected]p.xda-developers.com...4721_NVID.exe] or [here | http://wiki.xda-developers.com/index...=Prophet_ROMs]
* Within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB)
* Put the Prophet into bootloader mode (hold the camera button and insert the stylus into the larger hole next to the power socket)
* Plug the Prophet in via USB
* Run the RUU specific to your device (G3 or G4) from the AKU2.2 folder. If there is only one RUU, use that.
* When it has finished: disconnect the Prophet, and then re-enable the connect through USB in actyivesync before reconnecting the device.
==> if success, will going back into WM5 and then u can use the Lazzy Tool, look at http://forum.xda-developers.com/showthread.php?t=353547
choose WM 6.1 ROM, after u doing that step, u already done with the WM 6.1
SEMOGA SUKSES!

[Q] Help! Screen broke with PIN lock, need help mounting file system with CWM.

So I had the magical luck of having my S4 fall out of my pocket while closing my car door, shattered to pieces, no touch response from the glass.
The problem is, I had the device locked with a pattern & pin, so I can't just plug in and backup all my photos and stuff that were saved with local device storage. I also can't get adb to connect to the device (with developer options enabled), I always get a "device offline" error (I've updated ADB to the current 4.2.2 version, but I cant whitelist it because I can't allow it from the phone without touch)
Now, I still have root, and I was able to blindly install CWM (the OUDHS-Recovery-jfltespr-1.0.3.3.tar) version with Odin. I'm assuming it went well because I heard the sprint chime on restart.
WHAT I NEED: Is someone to either give me some screenshots (or number of button presses) to enable internal storage to be accessible by usb in cwm (also how to get into it too). I figure if I'm able to use volume presses and the home button I can get to my internal files. Other than this option I'm at a loss before I return it. If anyone can help I would be so damn grateful.
I'll draw you a picture too.
EDIT 1: I have a picture of the main CWM screen from a youtube video here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now all i need is the mount and storage menu

So nobody can help? I didn't think a cwm menu was that hard to come by with an S4.

alexcu said:
So nobody can help? I didn't think a cwm menu was that hard to come by with an S4.
Click to expand...
Click to collapse
Were you able to connect with adb before? Was usb debugging checked in settings before the drop?
If you could get adb to connect, you could use a program like android screencast to view your phones screen on your computer.

fgr said:
Were you able to connect with adb before? Was usb debugging checked in settings before the drop?
If you could get adb to connect, you could use a program like android screencast to view your phones screen on your computer.
Click to expand...
Click to collapse
That was my first move actually.
Problem is, even though debugging was enabled, I can't whitelist my PC from my phone. This is a new 4.2.2 feature to prevent data theft ironically.
All of these options will just return an "adb: device offline" error when it's connected. Trust me, I wish it was that easy.

You can't connect while in recovery either?
It would be kind of a pain, but you could pull multiple files that way.
Look HERE

[Q] Generic Tablet Problem (Android lying on his chest, doesn't matter what I do)

Hi, I'm not sure if I posted in good thread category, since I couldn't find a thread for my tablet, maybe I should explain why I posted in here:
It's a Generic tablet 703H I suppose, but I'm not sure if that's the model, it is running "Full AOSP on Rk29sdk" I suppose, (at least that's what AnTuTu benchmark told me before) I rooted the device using this and it WORKED, but when I decided to go into a recovery mode (I wanted to install CWM from here) but when I run my tablet with POWER and VOL+ (so I could enter STOCK recovery IF THERE IS ANY) all I got was an android lying on his back with opened chest, since that I can't do anything on it, I turn it off and on but nothing happens, I tried every keys and nothing helped. And when I plug the tablet so it will charge, I do not get battery animation, but yet again the same screen. But later I spotted that before that shows up it flashes with standing android with something blue spinning in his chest (Is it download mode maybe?) So I decided to plug the tablet to my laptop and see what happens. Before it was recignized as "Full" (ADB Drivers which I used to root) but now it showed up for a while as something about Nexus (not sure it google or galaxy) tablet. I am confused because now it again shows as Full. I wanted to flash it because it lags terribly (Android 4.0.4, kernel 3.0.8) and it bugs a lot (like "return" key was staying as "down" key)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it's not the correct thread category please move it, I didn't find correct place for it by myself
I understand this is not Nexus tablet but still this is what USB drivers installed on my Win7 flashed me about
If it helps - I can use Ubuntu (most of things about computer I do through Ubuntu, yet never about any external devise)

Problem Solved
Fixed tablet with a bootable SD card, if it's needed I can post how I managed to fix it.

[HELP] AOSP on RK29SDK FULL BRICK
...

May I know how to remove the eye shaped like icon (Smart stay) on my OP2 phone ??

Hello there
May I know how to remove the eye shaped like icon (Smart stay) on my OP2 phone ??
The icon is like below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please kindly help me out.

I am having a oneplus2 phone and I updated it from 3.5.5 oxygen os to 3.5.6 it was rooted and having TWRP installed and the bootloader was unlocked but after the update the root was removed and twrp(hybrid) was also removed and when I tried to return Again by connecting it to PC then I noted that my phone was not able to connect to the PC the issue was that the notification bar was not showing any USB option and in the developer option also when I click on MTP storage for the USB option there was no sign of connection to pc the drivers are installed other oneplus 2 is connecting on same pc with same cable before the update my phone was connecting to pc and my phone not connecting to pc in fastboot mode also im not able to do any thing and I noticed one strange thing that in developer option when I change the file transfer to charging it certainly changed in one touch but when i wanted it back to file transfer it took 3 or 4 click every time i think its just showing or phone is pretending its on file tranfer mode but i think it remains on charging im just able to do all with offical recovery and phone with wifi to download and flash with official recovery nothing else plz help me i think its the issue with new update and i was having hybrid recovery and root and i installed offical update with hybrid twrp recovery plz help only offical recovery and wifi with phone flashing with offical recovery only i tried factory reset also no download mode /fastboot not responding
Sent from my ONE A2003 using Tapatalk
Sent from my ONE A2003 using Tapatalk

Brogotek MTK8667 Head Unit wont recover

Hi all
I have one of these https://www.ebay.co.uk/itm/384770479698 in my 2006 Merc. its a MTK8667 Android 11 based unit. FF_866X is the device name, i'm sorry I do not know the MCU
I was sent some update files from the seller https://we.tl/t-UeDC40i6Ul XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223
Upgrade steps
1) Unzip after downloading (only unzip once)
2) Copy the file to the U disk
3) Connect the U disk while the power is on
4) The machine will automatically upgrade
5) If the machine cannot be upgraded, you need to press RES and keep touching the display with two fingers
during the update process it copied the superimage ok but then something came up in red but it came up to a kind of recovery and said erasing... it then rebooted it gets to the car logo screen, before android screen then goes to a blank screen with the following in bottom left corner...FASTBOOT MODE and wont go any further
I have pressed RST then two fingers on screen until i get "detected" but all i get is the same fastboot mode again,
I have redownloaded and extracted the firmware and reformatted my usb drive to fat32 and tried the whole process again and tried in both usb slots but no sucess...what can I do?? is it broken??
I have obtained other mtk8667 firmware files 8667.bin and 8667.upd from this topic https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/ on this forum but I have tried many different ones and it just wont read the usb, still just goes straight to fastboot mode....is anyone able to help me I have messaged the seller but no reply
So far I have tried about 7 or 8 different firmware versions, the sellers own, some junsun versions, ossuret versions even xtrons versions(all in correct format of 8667.bin and 8667.upd on root of usb formatted to fat32 but it does not read the usb.
The usb slots are still working as I can plug my phone in and it charges but the unit does not seem to have a full recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have messaged the seller (brogotek) on ebay but no reply as yet which is strange as they have always replied very quickly.
Do you think it is fixable? it was bought in April and ebay advert states it comes with 12 months repair or replace warranty
There just seems no way to get into any kind of recovery mode