Database Users

[Q] No network coverage.

Hi guys,
I got my Samsung Galaxy Y about a month ago, after looking at custom roms and such, without really reading into it (Like an absolute moron) I just went ahead and flashed, PDA, Phone And CSC and my network has stopped working.
The phone was locked to telstra, but I have rooted and unlocked it from the network (After losing network operator connection)
I've searched high and low for a fix to my problem in hope that I have not completely stuffed my phone.
Code:
Firmware versions:
PDA: S5360DXKL2
PHONE: S53650XXLA4
CSC: S5360OLBKL2
From the knowledge I gained over the last 2-3 days trying to fix this problem. This doesn't look correct at all. (And I hope someone here has this phone in Australia with the original rom, I believe that the original ROM for my phone was: DXLA1 or something along those lines.
Code:
About Phone:
Android Version: 4.1.1
Baseband: S5360XXLA4 (WHY?)
Build Name: NXT2ICSv2
IMEI and operator settings stayed as normal and didn't corrupt.
After wondering about this for days, I thought I'd get some help. Does anyone have any suggestion on how I should, if i can fix it?
Thanks.
EDIT:
I have S5830TDVKQ3_S5830TTELKQ3_S5830TDVKQ3_HOME.tar.md5,

Troubleshooting Instructions:
1.Restart your phone if you lost your signal(hold power button until your phone turns black and then release power button).
2.If the method 1 doesn't works, Try turning off your phone and remove for 5 minutes your SIM card and then blow the SIM card slot then after 5 minutes, Re-insert the SIM and turn on phone and see if this method works.
3.Try re-flashing your firmware using ODIN.
4.try checking your CSC , maybe you selected the wrong CSC.
5.Do a hard reset by dialing *2767*3855# in your dialer
if all the method that i've listed doesn't works , re-lock your phone to your carrier , unroot , factory reset and then bring your phone to your carrier's store where you got your network-locked galaxy y.

Sean De Jesus said:
Troubleshooting Instructions:
1.Restart your phone if you lost your signal(hold power button until your phone turns black and then release power button).
2.If the method 1 doesn't works, Try turning off your phone and remove for 5 minutes your SIM card and then blow the SIM card slot then after 5 minutes, Re-insert the SIM and turn on phone and see if this method works.
3.Try re-flashing your firmware using ODIN.
4.try checking your CSC , maybe you selected the wrong CSC.
5.Do a hard reset by dialing *2767*3855# in your dialer
if all the method that i've listed doesn't works , re-lock your phone to your carrier , unroot , factory reset and then bring your phone to your carrier's store where you got your network-locked galaxy y.
Click to expand...
Click to collapse
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?

Haluka said:
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?
Click to expand...
Click to collapse
I Don't know but try upgrading to the latest firmware provided by your carrirer .

Actually your original rom is xxla4 the latest is xxle1 or 2
Just flash the latest software for ur region
Sent from my GT-S5360 using xda app-developers app

s5360 hard to repair imei
Count supported models - 319
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: Unknown
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... FALSE
Rooting Phones, Please Wait...
Canceled By User
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Phone Not Found
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Unlocking... OK
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7

Haluka said:
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?
Click to expand...
Click to collapse
you just saved my phone + 1 THANKS

i have a similar problem where can i download the software tajkk3 and put it on my phone thank you very much
oh and also did it work for you?

[Q][i9505][Official Firmware] - United Kingdom (BTU)

Hi everyone,
first of all i hope it`s not a double thread, I could not find any BTU discussion of 4.3.
I`m getting really lost in this OTA / Kies compatibility over here..
My S4 was rooted now I`m trying to restore it to official state to make it OTA update compatible again.
The phone was bought in UK, GSM phone.
There was a matching firmware, which should be compatible for updates here, but i keep getting the same "Your firmware is not supported..." error message again and again.
Details:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ7
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
Later on 2nd try:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ8
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
So far after trying to help my problem with Google all I got, that I9505XXUEMJ7+I9505XXUEMJ7+I9505BTUEMJ8 is the latest official state and BTU is for the UK.
If someone could explain what is wrong here, I would be very happy.
Thanks.

Thread says the same, that I`m using the correct version
http://forum.xda-developers.com/showthread.php?t=2265477
Is my question so stupid or is it an unique problem that I have so no one will reply?

Maybe I'm missing something here but have you reverted to stock, stock recovery and Triangle Away first. You cannot receive OTA updates or Kies if your device is rooted or has a custom recovery etc...

Yes, Triangle away done, stock rom, stock recovery.

Cool, is BTU the correct firmware for you? Are you on a different carrier there? Can you flash the stock ROM you want through ODIN? (gotta run for lunch but I'm sure someone better than I will help)

restock
put phone into download mode
open kies select firmware upgrade initialisation
enter model number and serial number in capitals
make sure both are correct you can find it on the box or under the battery.

Thanks everyone, I`m gonna do it all over again this evening. BTU is correct for me, its unbranded gsm unlocked phone from UK.
Edit: Boring day in job here.. redone the whole thing and it works now.
Thank you everyone, again.

[Q] Issues updating firmware to 4.4.2

So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?

What is written in download mode? That's your phone model.

jojosilvera said:
So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
Click to expand...
Click to collapse
It seems like you can install i9500 roms and firmwares, because in your bootloader it shows that your phone is this

Lennyz1988 said:
What is written in download mode? That's your phone model.
Click to expand...
Click to collapse
So I booted into download mode or odin mode and it says this:
Product name: SGH-I337
Current Binary: Samsung official
System status: Official
Knox Kernel: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write protection: Enable
eMMC Burst Mode enabled
How can the phone be an I9500 and then in odin mode say it is a SGH-I337. Also of note when I tried updating via OTA it was the AT&T update checker came up and said there was no update. Was it that the phone was flashed with an AT&T rom?

Any updates for this? I suffer from the same problem. Thanks!

comexx said:
Any updates for this? I suffer from the same problem. Thanks!
Click to expand...
Click to collapse
It's not really a problem. My guess is that you are running a custom rom where someone just edited the device info to a i9500. Or you are running stock but someone just changed the model name. No big deal. I can also name my phone anything that I want.

I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.

comexx said:
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
Click to expand...
Click to collapse
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.

Lennyz1988 said:
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Click to expand...
Click to collapse
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!

comexx said:
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
Click to expand...
Click to collapse
Flash with Odin.

That was something I wanted to avoid. The seller offered me a return. Why would untouched firmware would be like this? Should I return it when I have the chance or just root & flash with another ROM? Thanks btw

[Q] IMEI Baseband Null

i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me

asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').

IMEI / Baseband null
vndnguyen said:
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').
Click to expand...
Click to collapse
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,

asif.malick said:
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,
Click to expand...
Click to collapse
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.

IMEI / Baseband null
vndnguyen said:
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.
Click to expand...
Click to collapse
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null

asif.malick said:
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null
Click to expand...
Click to collapse
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.

IMEI / Baseband null
vndnguyen said:
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.
Click to expand...
Click to collapse
uploaded. please check

asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Hello, had same problem, as well and managed to fix it. Did you solve this?

To solve IMEI NULL (assume using stock ROM):
1. Download the modem from here: http://forum.xda-developers.com/showthread.php?t=2475714
2. Go to download mode
3. Open ODIN and flash the modem only.

asif.malick said:
uploaded. please check
Click to expand...
Click to collapse
OK, your device is international Note 3 and you have flashed firmware for Note 3 Hong Kong. These firmwares are not compatible to each other, so it did brick your device.
Your original CSC is XSI (United Arab Emirates)
Try to download stock firmware for XSI and reflash it using Odin or Kies.
To obtain download link, open 'Phone INFO ★Samsung★' app > Menu > 'Firmware Browser', enter XSI in the CSC textbox, press Go button to search and select the firmware to download.
Gud luck.

I went on this link
http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
and downloaded NG1 modem, that did the trick for me.

[Q] Update Problem (Still 4.3)

Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.

mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.

mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.

vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?

mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.