Hi guys,
I got my Samsung Galaxy Y about a month ago, after looking at custom roms and such, without really reading into it (Like an absolute moron) I just went ahead and flashed, PDA, Phone And CSC and my network has stopped working.
The phone was locked to telstra, but I have rooted and unlocked it from the network (After losing network operator connection)
I've searched high and low for a fix to my problem in hope that I have not completely stuffed my phone.
Code:
Firmware versions:
PDA: S5360DXKL2
PHONE: S53650XXLA4
CSC: S5360OLBKL2
From the knowledge I gained over the last 2-3 days trying to fix this problem. This doesn't look correct at all. (And I hope someone here has this phone in Australia with the original rom, I believe that the original ROM for my phone was: DXLA1 or something along those lines.
Code:
About Phone:
Android Version: 4.1.1
Baseband: S5360XXLA4 (WHY?)
Build Name: NXT2ICSv2
IMEI and operator settings stayed as normal and didn't corrupt.
After wondering about this for days, I thought I'd get some help. Does anyone have any suggestion on how I should, if i can fix it?
Thanks.
EDIT:
I have S5830TDVKQ3_S5830TTELKQ3_S5830TDVKQ3_HOME.tar.md5,
Troubleshooting Instructions:
1.Restart your phone if you lost your signal(hold power button until your phone turns black and then release power button).
2.If the method 1 doesn't works, Try turning off your phone and remove for 5 minutes your SIM card and then blow the SIM card slot then after 5 minutes, Re-insert the SIM and turn on phone and see if this method works.
3.Try re-flashing your firmware using ODIN.
4.try checking your CSC , maybe you selected the wrong CSC.
5.Do a hard reset by dialing *2767*3855# in your dialer
if all the method that i've listed doesn't works , re-lock your phone to your carrier , unroot , factory reset and then bring your phone to your carrier's store where you got your network-locked galaxy y.
Sean De Jesus said:
Troubleshooting Instructions:
1.Restart your phone if you lost your signal(hold power button until your phone turns black and then release power button).
2.If the method 1 doesn't works, Try turning off your phone and remove for 5 minutes your SIM card and then blow the SIM card slot then after 5 minutes, Re-insert the SIM and turn on phone and see if this method works.
3.Try re-flashing your firmware using ODIN.
4.try checking your CSC , maybe you selected the wrong CSC.
5.Do a hard reset by dialing *2767*3855# in your dialer
if all the method that i've listed doesn't works , re-lock your phone to your carrier , unroot , factory reset and then bring your phone to your carrier's store where you got your network-locked galaxy y.
Click to expand...
Click to collapse
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?
Haluka said:
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?
Click to expand...
Click to collapse
I Don't know but try upgrading to the latest firmware provided by your carrirer .
Actually your original rom is xxla4 the latest is xxle1 or 2
Just flash the latest software for ur region
Sent from my GT-S5360 using xda app-developers app
s5360 hard to repair imei
Count supported models - 319
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: Unknown
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... FALSE
Rooting Phones, Please Wait...
Canceled By User
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Phone Not Found
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Searching Samsung USB Modem... Detected (COM135)
Model: GT-S5360
SW: BCM21553_Modem_SI1220.2_V2.4
IMEI: 001060000012347
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Unlocking... OK
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Done with Samsung Tool ver 12.7
Android Version: 2.3.5
Model: GT-S5360
Product Code: Unknown
Phone Version: S5360ZCKK1
PDA Version: S5360ZCKI4
CSC Version: Unknown
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Repairing IMEI... OK
New IMEI: 358894047151760
Rebooting Phone... OK
Done with Samsung Tool ver 12.7
Haluka said:
Hi Sean,
Thanks for your help. It was as easy as calling the telstra shop and asking what firmware was needed, getting it from sammobile and splitting it then reflashing the original firmware.
Turns out that the firmware Telstra is using for their 5360 is TAJKK3. (Austria) Does anyone know why this is?
Click to expand...
Click to collapse
you just saved my phone + 1 THANKS
i have a similar problem where can i download the software tajkk3 and put it on my phone thank you very much
oh and also did it work for you?
Related
Hello experts,
I am facing horrible issue on my Galaxy S4 (i9500).
Currently the phone can detect SIM card but won't register on network.
IMEI: normal
Baseband : normal
ROM : just flashed samsung official rom
EFS : already back up
Have tried several baseband to revive, but cannot
Screenshots attached, any one can help me? thanks
Your issue is most likely hardware related. I would take it to the service center and see if they can fix it.
soliujing said:
Hello experts,
I am facing horrible issue on my Galaxy S4 (i9500).
Currently the phone can detect SIM card but won't register on network.
IMEI: normal
Baseband : normal
ROM : just flashed samsung official rom
EFS : already back up
Have tried several baseband to revive, but cannot
Screenshots attached, any one can help me? thanks
Click to expand...
Click to collapse
It's possible a hardware problem but you can try this:
1. Download and flash the latest firmware for your device: HERE. via ODIN. Dial *#1234# when the process finish and your phone boot normally. Have to appear this (reflash the same firmware if not):
AP: I9500ZSUDNK1
CP: I9500XXUGNF6
CSC: I9500OZSDNK1
2. Good luck :highfive:
Hi everybody,
Here is my problem, suddenly my S6 edge did not want to connect to the SFR network or any other, so I sent in warranty but this diagnostic software problem and I am returning due to oxidation (he never touched the water, can be steam).
After that we returned to me in Binary Factory, with no more firmware on the device. In this mode, which is useful only for testing, it was connecting well SFR network.
Then blocked with my phone so I installed the following ROM: G925FXXU3COI9 France (XEF) - Android 5.1.1 Lollipop - (September 2015).
I can finally refill my phone but no different, he still wants more connect to the network ...
If it helps you Phone Info tells me this:
Manufacturer / Brand: Samsung
Phone Model: SM-G925F
production date: 2015.10.13
Version date: Fri September 25 2015 4:06:47 p.m. KST
CSC original name: TPH
Name of the current CSC: TPH
Product code: SM-G925FZKATPH
bootloader version: G925FXXU3COI9
baseband version: G925FXXU3COI9
PDA version of: G925FXXU3COI9
version of the SCC: G925FOXX3COJ1
android Version: 5.1.1
hardware / installed: samsungexynos7420 / universal7420 [64-bit]
mobile operator: 20801
So I tried the recovery mode:
wipe cache partition
data / factory reset
reboot your device
And finally my IMEI is the same as the original one.
If anyone could help me.
Thank you guys.
naseem00 said:
Hi everybody,
Here is my problem, suddenly my S6 edge ...
...
If anyone could help me.
Thank you guys.
Click to expand...
Click to collapse
If you cant get internet connection, it also could be related with your carrier provider's apn settings and etc. too~ I hope you already set them properly.
BTW this is S6 Edge Plus (G928*) forum fyi
Konsstantine34 said:
If you cant get internet connection, it also could be related with your carrier provider's apn settings and etc. too~ I hope you already set them properly.
BTW this is S6 Edge Plus (G928*) forum fyi
Click to expand...
Click to collapse
Oh sorry for the mistake,
By the way I already set up apn settings properly and it still doesn't work after that.
Recently my phone battery started dying on me very fast, i would leave it over night and in the morning the phone would be empty although it was fully charged. This started happening after installing an app which i think might had malware. I did a factory reset but nothing changed. The phone is rooted. So if anyone can help me find the right firmware i'd really appreciate it. I found one which matches with my phone's baseband and build number, but i'm not sure if it's still the right one.
Baseband version:
I9301IXXUAOD2
Build number:
KOTH49H.I930IXXUAOF1
Download the appropriate firmware from sammobile
And while flashing in Odin tick that nand erase all choice
It will erase the phone's nand and rewrite all the firmware again.
ziad311 said:
Download the appropriate firmware from sammobile
And while flashing in Odin tick that nand erase all choice
It will erase the phone's nand and rewrite all the firmware again.
Click to expand...
Click to collapse
I found one on sammobile but not for my carrier and then i found a firmware on samsung-firmware.org and all the codes match with mine.
the csc version matches with my baseband version and the pda matches my build number
Phone: Samsung Galaxy S3 Neo+
Model: GT-I9301I
PDA Version: I9301IXXUAOF1
CSC Version: I9301IXXUAOD2
Region: VVT
Build Date: 02.06.2015
OS: KitKat
OS Version: 4.4.2
Good luck and happy flashing
Just make sure to tick the function i mentioned. But backup all your stuffs before since it will erase everything
Ok so I recently got a Unlocked Galaxy S7 edge (SM-G935FSZL) I thought that it was just a SM-G935F but using 'Phone info' I get the extra szl. On to my dilemma, I was attempting root when I soft bricked my phone into a bootloop. I flashed a firmware which I thought was from the U.K waited for a bit then rooted successfully and everything has been fine or so I thought. I noticed it changed from LTE to 4g after flashing the firmware, I didn't pay it any mind. But now my speeds are extremely slow unless Im outdoors which was NOT happening before. I cant seem to connect to a galaxy vr device that was given to me brand new. And I dont have any CSC, Im guessing thats where my problem lies? I would love any help and advice to fix this and get my phone back up and running how it should be. I will give as much info as possible. I'm in the United States and T-Mobile is my carrier.
Bootloader Version:
G935FXXU1APB6
PDA Version:
G935FXXU1APB6
CSC Version:
______________
Baseband Version:
G935FXXU1BPHJ
Latest Firmware:
G935FXXS1BPJB/G935FUUB1BPH1/G935FXXU1BPHJ
Kernel Version:
3.18.14-7162483
http://forum.xda-developers.com/showthread.php?t=3392957
Hi and thank you for your time.
I´ve performed an advanced wipe with TWRP without a back up (thought i had) so i´ve got no OS and now i just want my stock firmware back installed.
I found several stock roms in another web site with csc and pda codes and I don't know wich one i should install.
Also i don´t know what info is relevant to answer the questions i have made. What i do have is:
Model SM-J320M
FCC ID
SSN
Country it was made Argentina
CNC ID
IMEI
S/N
And that the phone it self is not related to any comunication company but my service provider is CLARO
ps. I´ve contacted samsung support and the answer was to take it to a support center but i need to learn if im gonna keep messing with my phone..besides i'm broke ha!
The site firmware.gem-flash.com offers downloads known as the 4files.
You don't have to download there, but they do list the 4 needed files, which may help in getting you the versions you need.
See below copy/paste:
EXAMPLE:
Download J320MUBU0AQI2 UUB0AQI1 V5.1.1 Repair Firmware 4Files ( ARO Argentina )
Download Samsung Repair Firmware 4Files
Model: Samsung Galaxy J3 SM-J320M
OS Version: Android Lollipop V5.1.1
PDA/AP Version: J320MUBU0AQI2
CSC Version: J320MUUB0AQI1
MODEM/CP Version: J320MUBU0AQH2
Region: ARO Argentina
Security Patch Level : 2017-08-01
--------------------
Content Of File:
AP_J320MUBU0AQI2_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
BL_J320MUBU0AQI2_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
CP_J320MUBU0AQH2_CL12057946_QB14802852_REV00_user_low_ship.tar.md5
CSC_UUB_J320MUUB0AQI1_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
info.txt
J3XLTE_LTN_OPEN_HIDDEN100M.pit
--------------------
Click to expand...
Click to collapse