Ok so I recently got a Unlocked Galaxy S7 edge (SM-G935FSZL) I thought that it was just a SM-G935F but using 'Phone info' I get the extra szl. On to my dilemma, I was attempting root when I soft bricked my phone into a bootloop. I flashed a firmware which I thought was from the U.K waited for a bit then rooted successfully and everything has been fine or so I thought. I noticed it changed from LTE to 4g after flashing the firmware, I didn't pay it any mind. But now my speeds are extremely slow unless Im outdoors which was NOT happening before. I cant seem to connect to a galaxy vr device that was given to me brand new. And I dont have any CSC, Im guessing thats where my problem lies? I would love any help and advice to fix this and get my phone back up and running how it should be. I will give as much info as possible. I'm in the United States and T-Mobile is my carrier.
Bootloader Version:
G935FXXU1APB6
PDA Version:
G935FXXU1APB6
CSC Version:
______________
Baseband Version:
G935FXXU1BPHJ
Latest Firmware:
G935FXXS1BPJB/G935FUUB1BPH1/G935FXXU1BPHJ
Kernel Version:
3.18.14-7162483
http://forum.xda-developers.com/showthread.php?t=3392957
Related
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
jason9 said:
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
Click to expand...
Click to collapse
Here's mine from UK
jaythenut said:
Here's mine from UK
Click to expand...
Click to collapse
Hi,
Thanks for the reply, but I'm still unsure which Region firmware I need to flash. (I'm talking about stock firmware here).
If I flash The Hong Kong firmware, will my phone still work here in the UK? Will it change my phone language to Chinese?
I understand flashing the wrong region for your device could result in a brick. Is this correct?
I really would like a definitive answer before I do something stupid.
Thanks all
Update
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
jason9 said:
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
Click to expand...
Click to collapse
Here's mine
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
jason9 said:
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
Click to expand...
Click to collapse
Ok go to www.sammobile.com get firmware and download odin 3.09 and flash but don't know if uk firmware will work, if you're phone is working and you got signal don't worry about it just stay how you are
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
go to www.sammobile.com download firmware you need flash with odin factory reset should be good to go
MJ7 --> M= 2013 J= October
ML3 --> M=2013 L= December
M= 13ª letter
J= 10ª letter
L= 12ª letter
You can upgrade from MJ7 to ML3 like I made from MJ7 to ML2.
Downgrade from MJ7 for one before not.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
The build number is the firmware that come with. It will not harm your devices as long as the firmware is updated version. If your are updating to KitKat, you will not be able to downgrade to 4.3. Save your EFS file.
Thank you. I managed to find my MJ7 build and used odin and it worked.
but thank you for your comments i have a better undestanding for the future
You can go MJ7 > MK2 and return to MJ7 again also.
So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
What is written in download mode? That's your phone model.
jojosilvera said:
So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
Click to expand...
Click to collapse
It seems like you can install i9500 roms and firmwares, because in your bootloader it shows that your phone is this
Lennyz1988 said:
What is written in download mode? That's your phone model.
Click to expand...
Click to collapse
So I booted into download mode or odin mode and it says this:
Product name: SGH-I337
Current Binary: Samsung official
System status: Official
Knox Kernel: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write protection: Enable
eMMC Burst Mode enabled
How can the phone be an I9500 and then in odin mode say it is a SGH-I337. Also of note when I tried updating via OTA it was the AT&T update checker came up and said there was no update. Was it that the phone was flashed with an AT&T rom?
Any updates for this? I suffer from the same problem. Thanks!
comexx said:
Any updates for this? I suffer from the same problem. Thanks!
Click to expand...
Click to collapse
It's not really a problem. My guess is that you are running a custom rom where someone just edited the device info to a i9500. Or you are running stock but someone just changed the model name. No big deal. I can also name my phone anything that I want.
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
comexx said:
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
Click to expand...
Click to collapse
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Lennyz1988 said:
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Click to expand...
Click to collapse
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
comexx said:
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
Click to expand...
Click to collapse
Flash with Odin.
That was something I wanted to avoid. The seller offered me a return. Why would untouched firmware would be like this? Should I return it when I have the chance or just root & flash with another ROM? Thanks btw
Could someome please help me! I haven't been able to connect to LTE after wrong firmware installation. I was running the 6.0 with great connections but once I installed the 7.0 UK version (Im in the US with ATT) I can't connect to LTE. I'm from Mexico / USA and I didn't find a 7.0 firmware. I already checked my APN settings and everything. It doesnt work. Can someone link me to the correct firmware for me please.
Samsumg S7 Edge
Model Numbe: SM-G935F
Version: 7.0
Baseband: G935FXXU1ZPK1
Product Code: SM-G935FZKLBTU
Mobile Operator: ATT / 310410
Bootloader version: G935FXXU1ZPK4
PDA Version: G935FXXU1ZPK4
CSC Version: G935FOXA1ZPK4
This is the information I currently have.
Vinture said:
Could someome please help me! I haven't been able to connect to LTE after wrong firmware installation. I was running the 6.0 with great connections but once I installed the 7.0 UK version (Im in the US with ATT) I can't connect to LTE. I'm from Mexico / USA and I didn't find a 7.0 firmware. I already checked my APN settings and everything. It doesnt work. Can someone link me to the correct firmware for me please.
Samsumg S7 Edge
Model Numbe: SM-G935F
Version: 7.0
Baseband: G935FXXU1ZPK1
Product Code: SM-G935FZKLBTU
Mobile Operator: ATT / 310410
Bootloader version: G935FXXU1ZPK4
PDA Version: G935FXXU1ZPK4
CSC Version: G935FOXA1ZPK4
This is the information I currently have.
Click to expand...
Click to collapse
You need to flash ATT CSC.
DL CSCSelection_V2.3.5.zip and flash it. Choose ATT CSC in AROMA.
https://forum.xda-developers.com/s7...shable-csc-selection-30-t3392957/post67183861
Hello, guys.
I really need your help on this.
I bought a S7 Edge (G935F) with ATT Mexico in 2016, 2-years contract. The contract ended this march. and i already have the unlock code.
According to the instructions from ATT, all i need to do is do a factory reset, insert the SIM card i want to use, and input the unlock code.
But the problem is, i flashed the official UK ROM (G935FXXS2DRC3_G935FOXA2DRB1_BTU), which i downloaded from SamMobile, onto the device back in 2017 in order to update to Android Nougat.
And now when i insert the new SIM card (non-ATT), the phone just doesn't show the page where i am supposed to input the code. It simply doesn't have service.
I downloaded the official ROM for ATT Mexico from SamMobile, and tried to flash it.
The Nougat ROM for ATT MEXICO (G935FXXU1DQL7_G935FUWE1DQL7_IUS) was installed successfully, but still, no place to input the unlock code, simply no service. Even IMEI, IMEISV and the baseband version are not recognized. Weird.
The Marshmallow ROM for ATT MEXICO (G935FXXU1APER_G935FBUS1APER_IUS) simply couldn't be installed successfully. I got stuck on the start screen after the flash and couldn't even boot into the system.
UK Nougat ROM (G935FXXS2DRC3_G935FOXA2DRB1_BTU):
AP_G935FXXS2DRC3
BL_G935FXXS2DRC3
CP_G935FXXU2DRB6
CSC_OXA_G935FOXA2DRB1
HOME_CSC_OXA_G935FOXA2DRB1
ATT Mexico Nougat ROM (G935FXXU1DQL7_G935FUWE1DQL7_IUS):
AP_G935FXXU1DQL7
BL_G935FXXU1DQL7
CP_G935FXXU1DQL7
CSC_UWE_G935FUWE1DQL7
HOME_CSC_UWE_G935FUWE1DQL7
ATT Mexico Marshmallow ROM (G935FXXU1APER_G935FBUS1APER_IUS):
AP_G935FXXU1APER
BL_G935FXXU1APER
CP_G935FXXU1APEQ
CSC_BUS_G935FBUS1APER
HOME_CSC_BUS_G935FBUS1APER
And here is the phone's info after i flashed the ATT Mexico Nougat ROM:
CSC Code of the firmware: IUS, which means ATT Mexico
Active CSC Code: IUS, which means ATT MG935FXXexico
Product Code: Blank
Original CSC Code: Blank
CSC Country: Mexico
Bootloader: G935FXXS2DRC3
PDA Version: G935FXXU1DQL7
CSC Version: G935FUWE1DQL7
Baseband Version: Blank
(Got these info through the application "Phone Info Samsung")
I noticed the phone's bootloader is still the same as the bootloader of the UK Nougat ROM even after i flash the ATT Nougat ROM, which i think probably is the main cause of the problem.
I also tried to flash the bootloader of the ATT Mexico Nougat ROM, and Odin always gave me "FAIL (error 1892)".
Another thing is, after the flash, when i check the CSC info from the application "Phone Info Samsung", it shows the CSC is IUS, but when i boot into Recovery, on the bottom, it says, "Applied the CSC-code: BTU. Successfully applied multi-CSC."
And FRP Lock is already off.
I really need your help on this issue. Any help or guidance is greatly appreciated.
Love and Peace.
Daniel.
it's my pleasure to help you out