So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
What is written in download mode? That's your phone model.
jojosilvera said:
So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
Click to expand...
Click to collapse
It seems like you can install i9500 roms and firmwares, because in your bootloader it shows that your phone is this
Lennyz1988 said:
What is written in download mode? That's your phone model.
Click to expand...
Click to collapse
So I booted into download mode or odin mode and it says this:
Product name: SGH-I337
Current Binary: Samsung official
System status: Official
Knox Kernel: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write protection: Enable
eMMC Burst Mode enabled
How can the phone be an I9500 and then in odin mode say it is a SGH-I337. Also of note when I tried updating via OTA it was the AT&T update checker came up and said there was no update. Was it that the phone was flashed with an AT&T rom?
Any updates for this? I suffer from the same problem. Thanks!
comexx said:
Any updates for this? I suffer from the same problem. Thanks!
Click to expand...
Click to collapse
It's not really a problem. My guess is that you are running a custom rom where someone just edited the device info to a i9500. Or you are running stock but someone just changed the model name. No big deal. I can also name my phone anything that I want.
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
comexx said:
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
Click to expand...
Click to collapse
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Lennyz1988 said:
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Click to expand...
Click to collapse
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
comexx said:
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
Click to expand...
Click to collapse
Flash with Odin.
That was something I wanted to avoid. The seller offered me a return. Why would untouched firmware would be like this? Should I return it when I have the chance or just root & flash with another ROM? Thanks btw
Related
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
jason9 said:
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
Click to expand...
Click to collapse
Here's mine from UK
jaythenut said:
Here's mine from UK
Click to expand...
Click to collapse
Hi,
Thanks for the reply, but I'm still unsure which Region firmware I need to flash. (I'm talking about stock firmware here).
If I flash The Hong Kong firmware, will my phone still work here in the UK? Will it change my phone language to Chinese?
I understand flashing the wrong region for your device could result in a brick. Is this correct?
I really would like a definitive answer before I do something stupid.
Thanks all
Update
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
jason9 said:
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
Click to expand...
Click to collapse
Here's mine
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
jason9 said:
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
Click to expand...
Click to collapse
Ok go to www.sammobile.com get firmware and download odin 3.09 and flash but don't know if uk firmware will work, if you're phone is working and you got signal don't worry about it just stay how you are
Samsung Galaxy S4 I9505 Original
I am having the problem of not seeing the option in Network menu to enable 4G/LTE. I am running 4.3 right now. Our service provider Ooredoo in this country (Maldives) has released 4G and several others with the same model phone as mine can switch to 4G. I was wondering if there is any fix for this. I did hear about rooting the phone and deleting a file to fix this problem. I can't find out which file. and I have already downloaded a 4.3 firmware that said would fix the problem and flashed it. But there is no change.
And I am looking for the 4.4 Official Firmware for Galaxy S4 I9505 which can be used in my country.. Maldives.
And also is it possible to Downgrade the phone back to 4.3 after I flash 4.4?? From what I know so far it isnt.
I will post more information about the phone soon. Don't have it atm.
Thanks for any help you guys can provide.
Zephiroth said:
Samsung Galaxy S4 I9505 Original
I am having the problem of not seeing the option in Network menu to enable 4G/LTE. I am running 4.3 right now. Our service provider Ooredoo in this country (Maldives) has released 4G and several others with the same model phone as mine can switch to 4G. I was wondering if there is any fix for this. I did hear about rooting the phone and deleting a file to fix this problem. I can't find out which file. and I have already downloaded a 4.3 firmware that said would fix the problem and flashed it. But there is no change.
And I am looking for the 4.4 Official Firmware for Galaxy S4 I9505 which can be used in my country.. Maldives.
And also is it possible to Downgrade the phone back to 4.3 after I flash 4.4?? From what I know so far it isnt.
I will post more information about the phone soon. Don't have it atm.
Thanks for any help you guys can provide.
Click to expand...
Click to collapse
1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it
Joku1981 said:
1. Install Kies 3. Look for the 3 letters btw parenthesis close CSC. It will give u the code for know what firmware you have to download.
2. Go to Sammobile.com, log and sig in (pic 1)
3. Look for your firmware and download it
4. Flash it through ODIN like in the pic attached 2
5. Enjoy it
Click to expand...
Click to collapse
Alright so I was directed to a firmware on Sammobile
/firmwares/3/?download=27582
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Unknown
Version: Android 4.4.2
Changelist: 481100
Build date: Wed, 19 Mar 2014 10:39:06 +0000
Product Code: OMD
PDA: I9505XXUFNC9
CSC: I9505OMDFNC1
MODEM: I9505XXUFNC9
Does the country being Unknown have any effect on the firmware? The I9505XXUFNC9 firmware is said to be the international one but there is one on Sammobile that has country/carrier of Russia.
Thanks.
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.
vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
Hi,
What model of phone do you have? The LTE SM-N9005? If so (and I hope someone could either second this or correct me if i'm wrong) I believe you could flash via odin (and you do not need to be rooted to do this) the lollipop update that O2 has. 5.0 is available for the UK via the sammobile website, so if the basebands remain the same and the phone is the same model, I believe you could just download the 5.0 update from sammobile and flash it via odin.
Since you would be flashing an official version of sammy's rom, you won't need to be rooted, nor have a custom recovery.
Cheers
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
We need know your model and firmware that you are using. Install this APP and add some screenshots here.
reply
Ok phone model is SM-N9005 And firmware is N9005xxugng1
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
so, you are using the sm-n9005, and the firmware u have is the same one as the firmware that the 02 UK version runs in 4.4.2.
Unless I'm mistaken, and if anyone sees I am please correct me, you could flash the 5.0 version with odin for o2 UK. I don't see why it wouldn't work, since it seems you have the same phone and firmware currently in 4.4.2
cheers
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
Your device is using of UK (with CSC: BTU). It still without Lollipop update. I recommend don't flash via ODIN any firmware and wait for future updates (via OTA) if you aren't rooted.
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
You have
Model SM-N9005 Model name GALAXY Note 3 LTE Country United Kingdom Version Android 4.4.2 Changelist 1955971 Build date Mon, 28 Jul 2014 12:56:29 +0000 Product code BTU PDA N9005XXUGNG1 CSC N9005OXAGNJ3
BTU no current update and likely to skip to the next build of Android .
O2 UK firmware can be used on this phone flashed via Odin .
http://www.sammobile.com/firmwares/download/45137/N9005XXUGBOB6_N9005O2UGBOC1_O2U/
Hi everyone,
I bought a secondhand S8 but I am confused what version is it. Under "About Phone", it says the model is a SM-G950F. When I did a IMEI check online, it says it a SM-G950UZSASPR
So which model do I have exactly? A SM-G950F or a SM-G950U? It only has 1 slot for SIM card and the other for SDCard. I suspect it might have the wrong firmware inside? But the phone doesn't look like it has been rooted.
Should I be changing the firmware to something that I can use in my country (Singapore)? If so, how can I go about doing it and which version of firmware should I use? Will samsung pay not work if I root the phone and change the firmware?
Thanks in advance.
kian79 said:
Hi everyone,
I bought a secondhand S8 but I am confused what version is it. Under "About Phone", it says the model is a SM-G950F. When I did a IMEI check online, it says it a SM-G950UZSASPR
So which model do I have exactly? A SM-G950F or a SM-G950U? It only has 1 slot for SIM card and the other for SDCard. I suspect it might have the wrong firmware inside? But the phone doesn't look like it has been rooted.
Should I be changing the firmware to something that I can use in my country (Singapore)? If so, how can I go about doing it and which version of firmware should I use? Will samsung pay not work if I root the phone and change the firmware?
Thanks in advance.
Click to expand...
Click to collapse
Install Phone Info Samsung from the play store.
Link here:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
From there take a look at your "CSC CODE" tab, should give you the country and what carrier specific model/sw is installed.
I would update it to your country specific sw if possible.
If you root, you will not have Samsung Pay. I am not sure if majisk can hide it enough to use, maybe someone else can chime in on that more thoroughly.
Thanks. I have installed the Phone INFO app. Here is what I see:
Phone Model: SM-G950F
Device Type: greatqltechn
Product Name: greatqltezh
Country of Origin: Made in China
Product Code: SM2G950UZSAXAS
Original CSC Code: (blank)
Firmware's CSC Code: TGY
Active CSC Code: TGY
Available CSC Codes: (blank)
CSC Country: Hong Kong / HK
Bootloader Version: G950USQU5CRG3
PDA Version: G950FSQU4CRE9
CSC Version: G950FOYN3CRF2
Baseband Version: G950USQU5CRG3
Latest Firmware: N/A
Kernel Version: 4.4.78-13889051 64-bit
Java Virtual Machine: ART 2.1.0
kian79 said:
Thanks. I have installed the Phone INFO app. Here is what I see:
Phone Model: SM-G950F
Device Type: greatqltechn
Product Name: greatqltezh
Country of Origin: Made in China
Product Code: SM2G950UZSAXAS
Original CSC Code: (blank)
Firmware's CSC Code: TGY
Active CSC Code: TGY
Available CSC Codes: (blank)
CSC Country: Hong Kong / HK
Bootloader Version: G950USQU5CRG3
PDA Version: G950FSQU4CRE9
CSC Version: G950FOYN3CRF2
Baseband Version: G950USQU5CRG3
Latest Firmware: N/A
Kernel Version: 4.4.78-13889051 64-bit
Java Virtual Machine: ART 2.1.0
Click to expand...
Click to collapse
Looks like you have options if you wish:
Singapore (XSP)
Singapore (MM1)
Singapore (SingTel) (SIN)
Singapore (StarHub) (STH)
I'm not too familiar with how you would need to change it, if it's even required at all. My method, me being located in the US, is much more complicated than what you would need to do. Hopefully someone else can give you more input or send you in the right direction.
kian79 said:
Hi everyone,
I bought a secondhand S8 but I am confused what version is it. Under "About Phone", it says the model is a SM-G950F. When I did a IMEI check online, it says it a SM-G950UZSASPR
So which model do I have exactly? A SM-G950F or a SM-G950U? It only has 1 slot for SIM card and the other for SDCard. I suspect it might have the wrong firmware inside? But the phone doesn't look like it has been rooted.
Should I be changing the firmware to something that I can use in my country (Singapore)? If so, how can I go about doing it and which version of firmware should I use? Will samsung pay not work if I root the phone and change the firmware?
Thanks in advance.
Click to expand...
Click to collapse
Look in download mode, whatever it says is the model there that's what it is. Then flash the firmware you require for that model. Confused as the BL is G950U which is Snapdragon, whereas firmware is from exynos...
callumbr1 said:
Look in download mode, whatever it says is the model there that's what it is. Then flash the firmware you require for that model. Confused as the BL is G950U which is Snapdragon, whereas firmware is from exynos...
Click to expand...
Click to collapse
There was a Hong Kong variant that was Snapdragon for the S8
The only true method would to be remove the back glass and check model of mother board
Exactly! That is what I am confused about.
callumbr1 said:
Look in download mode, whatever it says is the model there that's what it is. Then flash the firmware you require for that model. Confused as the BL is G950U which is Snapdragon, whereas firmware is from exynos...
Click to expand...
Click to collapse
Anyone can guide me? I am still confused. I want to load in the latest official firmware, but I still don't know what is the true model of my phone. The phone doesn't seem to be rooted, but it cannot pass safetynet test. I have a CTS Profile Match Fail error when I used root checker app. What should I do?
I boot into download mode, but I am not getting much information there. This is what I am seeing:
CARRIER: SPR
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B5 (2.1.1.1) KS S5
SECURE DOWNLOAD: ENBABLE
DID: (some numbers)
Thanks in advance!
callumbr1 said:
Look in download mode, whatever it says is the model there that's what it is. Then flash the firmware you require for that model. Confused as the BL is G950U which is Snapdragon, whereas firmware is from exynos...
Click to expand...
Click to collapse
kian79 said:
Exactly! That is what I am confused about.
Click to expand...
Click to collapse
kian79 said:
Anyone can guide me? I am still confused. I want to load in the latest official firmware, but I still don't know what is the true model of my phone. The phone doesn't seem to be rooted, but it cannot pass safetynet test. I have a CTS Profile Match Fail error when I used root checker app. What should I do?
I boot into download mode, but I am not getting much information there. This is what I am seeing:
CARRIER: SPR
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B5 (2.1.1.1) KS S5
SECURE DOWNLOAD: ENBABLE
DID: (some numbers)
Thanks in advance!
Click to expand...
Click to collapse
It doesn't say the model in download mode? At the top in red text I believe?
kian79 said:
Anyone can guide me? I am still confused. I want to load in the latest official firmware, but I still don't know what is the true model of my phone. The phone doesn't seem to be rooted, but it cannot pass safetynet test. I have a CTS Profile Match Fail error when I used root checker app. What should I do?
I boot into download mode, but I am not getting much information there. This is what I am seeing:
CARRIER: SPR
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B5 (2.1.1.1) KS S5
SECURE DOWNLOAD: ENBABLE
DID: (some numbers)
Thanks in advance!
Click to expand...
Click to collapse
It appears to be a Sprint version. But with Odin and csc files and matching sim card you can make it any us carrier
Thanks guys. The phone is indeed a SM-G950U. I managed to used Odin and flash SM-G950U1 firmware onto it. I used the XAA version with a local non-US SIM. Samsung pay seems to be working. However there is no option to enable VOLTE and the FM radio.
U1 firmware are lacking those features...
kian79 said:
Thanks guys. The phone is indeed a SM-G950U. I managed to used Odin and flash SM-G950U1 firmware onto it. I used the XAA version with a local non-US SIM. Samsung pay seems to be working. However there is no option to enable VOLTE and the FM radio.
Click to expand...
Click to collapse
Link rom bro...