No network - Galaxy S6 Edge+ Q&A, Help & Troubleshooting

Hi everybody,
Here is my problem, suddenly my S6 edge did not want to connect to the SFR network or any other, so I sent in warranty but this diagnostic software problem and I am returning due to oxidation (he never touched the water, can be steam).
After that we returned to me in Binary Factory, with no more firmware on the device. In this mode, which is useful only for testing, it was connecting well SFR network.
Then blocked with my phone so I installed the following ROM: G925FXXU3COI9 France (XEF) - Android 5.1.1 Lollipop - (September 2015).
I can finally refill my phone but no different, he still wants more connect to the network ...
If it helps you Phone Info tells me this:
Manufacturer / Brand: Samsung
Phone Model: SM-G925F
production date: 2015.10.13
Version date: Fri September 25 2015 4:06:47 p.m. KST
CSC original name: TPH
Name of the current CSC: TPH
Product code: SM-G925FZKATPH
bootloader version: G925FXXU3COI9
baseband version: G925FXXU3COI9
PDA version of: G925FXXU3COI9
version of the SCC: G925FOXX3COJ1
android Version: 5.1.1
hardware / installed: samsungexynos7420 / universal7420 [64-bit]
mobile operator: 20801
So I tried the recovery mode:
wipe cache partition
data / factory reset
reboot your device
And finally my IMEI is the same as the original one.
If anyone could help me.
Thank you guys.

naseem00 said:
Hi everybody,
Here is my problem, suddenly my S6 edge ...
...
If anyone could help me.
Thank you guys.
Click to expand...
Click to collapse
If you cant get internet connection, it also could be related with your carrier provider's apn settings and etc. too~ I hope you already set them properly.
BTW this is S6 Edge Plus (G928*) forum fyi

Konsstantine34 said:
If you cant get internet connection, it also could be related with your carrier provider's apn settings and etc. too~ I hope you already set them properly.
BTW this is S6 Edge Plus (G928*) forum fyi
Click to expand...
Click to collapse
Oh sorry for the mistake,
By the way I already set up apn settings properly and it still doesn't work after that.

Related

[Q] Please.. what is this all carrier S4 thing.. I have no carrier!!!

Hello everyone,
Please.. what is this all carrier S4 thing.. I have no carrier.. I bought my device in the Middle east... with no
carrier what so ever... and now I just want to have ad-hoc connection in my gs 4... So please
can one help me how i can connect to ad-hoc from windows!
* My device:
Galaxy S4.. GT-I9500
* unlocked...
* Baseband version: I9500XXUAMDK
* Kernal version: 3.4.5-526212
[email protected] #1
*Build number: JDQ39.I9500XXUAMDK
*SELinux status: permissive
Thanks in advance!
Why did we post this message in the general area and here to? The Mods would have moved the other one here.
Your device is unlocked, no need to worry about different carriers.
salih2002 said:
Hello everyone,
Please.. what is this all carrier S4 thing.. I have no carrier.. I bought my device in the Middle east... with no
carrier what so ever... and now I just want to have ad-hoc connection in my gs 4... So please
can one help me how i can connect to ad-hoc from windows!
* My device:
Galaxy S4.. GT-I9500
* unlocked...
* Baseband version: I9500XXUAMDK
* Kernal version: 3.4.5-526212
[email protected] #1
*Build number: JDQ39.I9500XXUAMDK
*SELinux status: permissive
Thanks in advance!
Click to expand...
Click to collapse
Like Ax said don't worry about carrier, but you should be concerned with your model of phone. You have a GT-i9500 which has different hardware than the GT-i9505 and our SGH-I337(M). So i'd stick to your forum here: http://forum.xda-developers.com/forumdisplay.php?f=2286
After googling for I9500XXUAMDK it looks like your phone's firmware is russian. So, your problem is the radio hardware for mobile networks do NOT match to the network standards the carriers in US and Canada use. Mostly it's a matter of used frequencies and maybe communication protocols which differ from Europe to America.
You CAN try to flash another firmware with different modem which match better to your country but this won't negate any hardware limitations. I suggest to check http://www.sammobile.com for a firmware matching to your country, or your carrier. But this is just a suggestion; I won't give any guarantee it will work.
Good luck.
//Hsishi
Google how to connect an Android phone to WiFi.
Its as simple as connecting a PC to WiFi.

[Q] no LTE in Belgium with csc n9005phnena2 ap n9005xxuena6

Hello there.
I'm sorry if I haven't used the search engine right but I couldn't find a thread similar or answering my question.
I bought my phone, the note 3 in the Netherlands. It is an unbranded phone(phn) as far as I know.
But I am living in belgium. And for some reason I can't get my 4g to work with the Base operator.
Or with any other operators. For some reason there is no LTE option available in the network settings.
Now I have been searching on Google and went to some stores and compared my csc and ap version to the note 3 working on lte on the same network in the stores. And I saw with every note 3 in the stores that the ap version was ap n9005xxuena7 and mine is n9005xxuena6.
How come my unbranded phone with csc n9005phnena2 is not getting the update that let's me use 4g?
At least that is what I think?
After previewing the post, I noticed I have to update my signature. ..
Your carrier probably hasn't enabled it on your line.
Ring them up
Sent from my SM-N9005 using Tapatalk
I doubt that. They informed me about 4g them selves and the Sim they gave me had a small picture of 4g(lte) and 3 dual carrier on it.
Have you tried a factory reset?
I had a similar problem with my btu uk device after flashing the Polish na6 official firmware. Very unreliable mobile data connectity and went to 4g very rarely.
I didn't factory reset but instead flashed a custom rom (also based on na6) which fixed the problem completely.
I'd suggest factory reset first to see if that helps.
Sent from my SM-N9005 using Tapatalk
I don't know about Base, but with Proximus, you really have to call the customer service to ask them to activate the 4g for you. Did you try that?
Sent from my SM-N9005 using XDA Premium 4 mobile app
alexcarterkarsus said:
I don't know about Base, but with Proximus, you really have to call the customer service to ask them to activate the 4g for you. Did you try that?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have a cheap abo with Proximus and have 4G on my note 3.
I don't have to do a thing about it so you don't have to call them its already activated for every abo.
I don't think it is operator related. Because my Sim works on my mother's s4 perfect.
I guess it is the update that is necessary to activate 4g on unbranded phones.
dsm52 said:
Have you tried a factory reset?
I had a similar problem with my btu uk device after flashing the Polish na6 official firmware. Very unreliable mobile data connectity and went to 4g very rarely.
I didn't factory reset but instead flashed a custom rom (also based on na6) which fixed the problem completely.
I'd suggest factory reset first to see if that helps.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I'll probably be losing all my data&apps
mrturq said:
I don't think it is operator related. Because my Sim works on my mother's s4 perfect.
I guess it is the update that is necessary to activate 4g on unbranded phones.
Click to expand...
Click to collapse
I can't say what's wrong with BASE, maybe they haven't enabled 4G towers yet...I'm on XL from Proximus and I get LTE all over Vlaanderen.
Well, try to flash some of the Polish 4.4.2 available all over XDA. My Note was also bought from Belsimpel but never had any issues with 4g--->with the latest NB3 (OTA) there's no more 4G sign...it's LTE.
---------- Post added at 12:07 PM ---------- Previous post was at 11:59 AM ----------
mrturq said:
I'll probably be losing all my data&apps
Click to expand...
Click to collapse
Kies Backup works just fine...
Not every provider has 4G enabled in every CSC version. I get this question about 12 times a day on the T-Mobile NL forums.
I had 4G on DBT with T-Mobile NL two months before the T-Mobile NL Branded and PHN versions had it.
Resetting won't make a difference. This needs to be toggled in the firmware itself by Samsung. On most other devices you can use the *#*#4636#*#* or *#2263# dialer code to manually force the network mode, but they disabled it on the Note 3.
Try https://play.google.com/store/apps/details?id=com.viaero4gtoggle
ShadowLea said:
Not every provider has 4G enabled in every CSC version. I get this question about 12 times a day on the T-Mobile NL forums.
I had 4G on DBT with T-Mobile NL two months before the T-Mobile NL Branded and PHN versions had it.
Resetting won't make a difference. This needs to be toggled in the firmware itself by Samsung. On most other devices you can use the *#*#4636#*#* or *#2263# dialer code to manually force the network mode, but they disabled it on the Note 3.
Try https://play.google.com/store/apps/details?id=com.viaero4gtoggle
Click to expand...
Click to collapse
Thank you. You confirmed what I assumed was the problem.
I already have tried viaero. All I get is a black screen. No selectable option or toggle button. Nothing but a black screen. So I have to wait for an update or put a custom rom on it?
And is it possible to backup app settings? Like I dont have to configure Yatse again and Xbmc?
I am a noob with flashing custom roms and rooting.
Thank you.
call Base , tell them to activate it . Mobile Viking uses the base network and they had to phone base to activate G4 for my number.
up till few weeks a go you neded to make a call for proximus aswell but that changed because of the promoting of 4G action that is running for 6 months
webjunky said:
call Base , tell them to activate it . Mobile Viking uses the base network and they had to phone base to activate G4 for my number.
up till few weeks a go you neded to make a call for proximus aswell but that changed because of the promoting of 4G action that is running for 6 months
Click to expand...
Click to collapse
4g is already activated by base.
mrturq said:
Thank you. You confirmed what I assumed was the problem.
I already have tried viaero. All I get is a black screen. No selectable option or toggle button. Nothing but a black screen. So I have to wait for an update or put a custom rom on it?
And is it possible to backup app settings? Like I dont have to configure Yatse again and Xbmc?
I am a noob with flashing custom roms and rooting.
Thank you.
Click to expand...
Click to collapse
there should be no need to flash a rom for this , i use a romanian Note3 and 4G ( proximus for daily use ) works perfectly.
mrturq said:
Thank you. You confirmed what I assumed was the problem.
I already have tried viaero. All I get is a black screen. No selectable option or toggle button. Nothing but a black screen. So I have to wait for an update or put a custom rom on it?
And is it possible to backup app settings? Like I dont have to configure Yatse again and Xbmc?
I am a noob with flashing custom roms and rooting.
Thank you.
Click to expand...
Click to collapse
No need to flash a customROM. If another official ROM has 4G enabled for our provider, you could flash that over PHN. No rooting, no knox triggering, no warranty issues. The only issue you might run into is that nonsense people have recently been getting flashing over PHN with the filesize.
NA6 is the most recent firmware for PHN. Could you go check in the stores what CSC version the devices are using that do have 4G on your provider? To my knowledge NA7 is a provider-specific version limited to T-Mobile and daughter-companies.
webjunky said:
there should be no need to flash a rom for this , i use a romanian Note3 and 4G ( proximus for daily use ) works perfectly.
Click to expand...
Click to collapse
Did you miss the part where I said every CSC has a different list of 4G activated providers?
ShadowLea said:
No need to flash a customROM. If another official ROM has 4G enabled for our provider, you could flash that over PHN. No rooting, no knox triggering, no warranty issues. The only issue you might run into is that nonsense people have recently been getting flashing over PHN with the filesize.
NA6 is the most recent firmware for PHN. Could you go check in the stores what CSC version the devices are using that do have 4G on your provider? To my knowledge NA7 is a provider-specific version limited to T-Mobile and daughter-companies.
Click to expand...
Click to collapse
Thank you... Again.
I have been searching on Google for people having the same problem. I found someone posting his csc version and for this guy is the 4g working with the Ota update he got.
His csc version was N9005OXXDMJ4.
I'm also going to the store tomorrow to look it up.
mrturq said:
Thank you... Again.
I have been searching on Google for people having the same problem. I found someone posting his csc version and for this guy is the 4g working with the Ota update he got.
His csc version was N9005OXXDMJ4.
I'm also going to the store tomorrow to look it up.
Click to expand...
Click to collapse
thats the same csc version as the romanian rom
webjunky said:
thats the same csc version as the romanian rom
Click to expand...
Click to collapse
What does that mean? Can I flash a romanian official rom without losing my data and app settings??
Actually, that's XEF. France Unbranded. (It could also be romania, but XEF is more common. Also, they tend to sell XEF in most open stores here in the benelux.)
Model: SM-N9005
Model name: Galaxy Note 3
Country: France
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XEF
PDA: N9005XXUDMJ7
CSC: N9005OXXDMJ4
MODEM: N9005XXUDMJ7
Yes, you can easily flash XEF over PHN.
This one: http://www.sammobile.com/firmwares/3/?download=25938
Model: SM-N9005
Model name: Galaxy Note 3
Country: France
Version: Android 4.4.2
Changelist: 636608
Build date: Wed, 12 Feb 2014 08:24:44 +0000
Product Code: XEF
PDA: N9005XXUENB4
CSC: N9005OXXENB1
MODEM: N9005XXUENB1
In theory, you shouldn't loose any data. You can always use Helium to make a backup. (KIES tends to hate the Note 3. Or life in general)
ShadowLea said:
Actually, that's XEF. France Unbranded. (It could also be romania, but XEF is more common. Also, they tend to sell XEF in most open stores here in the benelux.)
Model: SM-N9005
Model name: Galaxy Note 3
Country: France
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XEF
PDA: N9005XXUDMJ7
CSC: N9005OXXDMJ4
MODEM: N9005XXUDMJ7
Yes, you can easily flash XEF over PHN.
This one: http://www.sammobile.com/firmwares/3/?download=25938
Model: SM-N9005
Model name: Galaxy Note 3
Country: France
Version: Android 4.4.2
Changelist: 636608
Build date: Wed, 12 Feb 2014 08:24:44 +0000
Product Code: XEF
PDA: N9005XXUENB4
CSC: N9005OXXENB1
MODEM: N9005XXUENB1
In theory, you shouldn't loose any data. You can always use Helium to make a backup. (KIES tends to hate the Note 3. Or life in general)
Click to expand...
Click to collapse
You got me all excited about this. I am at work right now so I can't do it right now.
How do I flash? With kies? Or do I use something else?
Or should I look that up ?
I am going to look that up no matter what but advise and how to is always welcome.
Thank you for the help everybody.
EDIT: it explains on the website it self how to flash. Thank you.
Gonna let know if it worked.

[Q] Just got S5 and needs help (G900FD)

Hello guys! I just bought a phone (Galaxy S5 G900FD) and its parallel imported as international version. Ofcourse its brand new.
I went to 'about phone' and it clearly says Arab emirates. I bought numerous of phones before and this is kinda look strange since I've never seen like any phone actually says like 'Arab emirates' below 'about phone' section. So I typed things I don't understand as below, please tell me what are those?
It says
1)
United Arab Emirates
TRA ID: 0016333/08
TA: 0000000000/00
2)
Security software version
MDF v1.0 Release 3
VPN v1.4 Release 1
3)
SE for Android Status
Enforcing
SEPF_SM-G900FD_4.4.2_0016
Wed Oct 15 20:34:49 2014
4)
Build Number
KOT49H.G900FDXXU1ANJ2
Is this phone safe to use? Can anyone tells me what those '4' sections meaning?
Thanks guys and sorry for my poor English!!! Thanks in advance!!
goufcustom said:
Hello guys! I just bought a phone (Galaxy S5 G900FD) and its parallel imported as international version. Ofcourse its brand new.
I went to 'about phone' and it clearly says Arab emirates. I bought numerous of phones before and this is kinda look strange since I've never seen like any phone actually says like 'Arab emirates' below 'about phone' section. So I typed things I don't understand as below, please tell me what are those?
It says
1)
United Arab Emirates
TRA ID: 0016333/08
TA: 0000000000/00
2)
Security software version
MDF v1.0 Release 3
VPN v1.4 Release 1
3)
SE for Android Status
Enforcing
SEPF_SM-G900FD_4.4.2_0016
Wed Oct 15 20:34:49 2014
4)
Build Number
KOT49H.G900FDXXU1ANJ2
Is this phone safe to use? Can anyone tells me what those '4' sections meaning?
Thanks guys and sorry for my poor English!!! Thanks in advance!!
Click to expand...
Click to collapse
I'm base in New Zealand then do I need to get NZ rom to use a phone?
Use phone info app from playstore
U can find the CSC country there if u want to flash the most compatible firmeware
Unless n otherwise dont care about those info much bro
N it says your on kitkat 4.4.2
Update your device for lolipop if u want (u must revieve the OTA update)
Those are some buildnumbers from samsung @goufcustom
No u dont wanna flash the NZ rom
But Always flash the rom with original CSC code
For example mine it is BTU (UK n Ireland)
Find your original CSC code from phoneinfo app
It is not recommended but it is the best way
It's safe. Nothing to be afraid of.
I bought my S5 Duos in Dubai few days ago with the same info about UAE in the phone's about section.

Help - I have bricked my Note 3 sm-n9005

I was given a Samsung galaxy note 3 32gb sm-n9005 (Orange France)
Problem is all the default apps are in French and the signal was rather quirky not really working on TNZ network (Telecom New Zealand)
Me being me decided to downgrade to 4.4.2 from 5.0 to put it on the Telecom (now Spark) network with all the correct settings and apps etc
This is what I have tried installing:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country New Zealand
Version Android 4.4.2
Changelist 1955971
Build date Mon, 28 Jul 2014 12:56:29 +0000
Product code TNZ
PDA N9005XXUGNG1
CSC N9005TNZGNI2
It installs to approx 97% and fails on the hidden.img.ext4
I have tried using different pits to no avail just keeps failing
Any suggestions please ? I have read countless threads but can't figure this one out at all....
kaimaikid said:
I was given a Samsung galaxy note 3 32gb sm-n9005 (Orange France)
Problem is all the default apps are in French and the signal was rather quirky not really working on TNZ network (Telecom New Zealand)
Me being me decided to downgrade to 4.4.2 from 5.0 to put it on the Telecom (now Spark) network with all the correct settings and apps etc
This is what I have tried installing:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country New Zealand
Version Android 4.4.2
Changelist 1955971
Build date Mon, 28 Jul 2014 12:56:29 +0000
Product code TNZ
PDA N9005XXUGNG1
CSC N9005TNZGNI2
It installs to approx 97% and fails on the hidden.img.ext4
I have tried using different pits to no avail just keeps failing
Any suggestions please ? I have read countless threads but can't figure this one out at all....
Click to expand...
Click to collapse
You think I'm stupid maybe but.... New Zeland (TNZ) never gonna work if your phone is branded to France (Orange). No? It's normal that ODIN give you error everytime.
*Steps to follow:
1. Download the correct firmware to Orange (FRANCE): HERE.
2. Unzip and flash it via ODIN.
3. Buy a unlock code by IMEI and unlock your device.
4. Every SIM should work now (your device is international).
5. Done.
Joku1981 said:
You think I'm stupid maybe but.... New Zeland (TNZ) never gonna work if your phone is branded to France (Orange). No? It's normal that ODIN give you error everytime.
*Steps to follow:
1. Download the correct firmware to Orange (FRANCE):link removed so I can post
2. Unzip and flash it via ODIN.
3. Buy a unlock code by IMEI and unlock your device.
4. Every SIM should work now (your device is international).
5. Done.
Click to expand...
Click to collapse
Nah all sorted - It was a case of finding the correct pit file to match the firmware, the phone was already on a different provider here in NZ so once I got the right one with the hidden partition all went well....

-Help- Trying to find correct stock Os

Hi and thank you for your time.
I´ve performed an advanced wipe with TWRP without a back up (thought i had) so i´ve got no OS and now i just want my stock firmware back installed.
I found several stock roms in another web site with csc and pda codes and I don't know wich one i should install.
Also i don´t know what info is relevant to answer the questions i have made. What i do have is:
Model SM-J320M
FCC ID
SSN
Country it was made Argentina
CNC ID
IMEI
S/N
And that the phone it self is not related to any comunication company but my service provider is CLARO
ps. I´ve contacted samsung support and the answer was to take it to a support center but i need to learn if im gonna keep messing with my phone..besides i'm broke ha!
The site firmware.gem-flash.com offers downloads known as the 4files.
You don't have to download there, but they do list the 4 needed files, which may help in getting you the versions you need.
See below copy/paste:
EXAMPLE:
Download J320MUBU0AQI2 UUB0AQI1 V5.1.1 Repair Firmware 4Files ( ARO Argentina )
Download Samsung Repair Firmware 4Files
Model: Samsung Galaxy J3 SM-J320M
OS Version: Android Lollipop V5.1.1
PDA/AP Version: J320MUBU0AQI2
CSC Version: J320MUUB0AQI1
MODEM/CP Version: J320MUBU0AQH2
Region: ARO Argentina
Security Patch Level : 2017-08-01
--------------------
Content Of File:
AP_J320MUBU0AQI2_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
BL_J320MUBU0AQI2_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
CP_J320MUBU0AQH2_CL12057946_QB14802852_REV00_user_low_ship.tar.md5
CSC_UUB_J320MUUB0AQI1_CL12303860_QB15030482_REV00_user_low_ship.tar.md5
info.txt
J3XLTE_LTN_OPEN_HIDDEN100M.pit
--------------------
Click to expand...
Click to collapse

Categories

Resources