Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
Can someone please post a link to download qhsusb dload drivers and tell how to install theme please.
Is your phone working? Because if you're plugging your phone to the computer and getting this error and your device is not working... it means your eMMC is fried.
Sent from my Nexus 10 using Tapatalk
My phone is dead 15 days ago!!! it is stuck on frozen lg logo splash screen, no recovery mode, only hard reset mode, when tempting download mode, it goes only to the first screen where it's writtend download mode with blue dots, another thing when on lg logo splash screen, my phone shows in device manager under modem and port com, i wanted theses drivers to try linux methode!!! any help would be much appreciated. thank you
Do you know how to use adb and fastboot?
<<Turc şi Mândru>>
yeah, the problem is, adb can't read my phone while it shows normally in device manager
devdassi said:
yeah, the problem is, adb can't read my phone while it shows normally in device manager
Click to expand...
Click to collapse
Did you solve your issue? I am in your same situation
Hallo XDA Communuity,
first of all....Excuse my worse english
I have a big problem. I use my LG g2 a few days with the last FW (android 4.4.2) - rooted and custom recovery.
With this FW my Whatsapp voice records are terrible. Also i want back to the older Android
4.2.2 (records are crystal clear)
I start my phone in download mode, and the phone stays in the screen with the white box and
the sign download modus. The PC dont recognize the phone.
Suddenly the Phone goes in bootloop.the only thing whats works is the recovery
Is it possible to repair the download mode ? i found a command (internet) for the terminal
in the recovery but it dont works...
I also found a script "to unbrick" the device under adb. but it seems that adb dont works...
the pc recognize a adb device (i start the recovery) but adb does nothing...
What can i do ?
Greeting wächti
solved the problem - i had to format the internal memory....
hi everyone,
i started this thread to inform something weird happened to me and for some good help from our precious devs here
I have 3 lg g2's , all d802, 2 rooted and enjoying different roms on it, third one was on original stock 80220c-hkg-xx, so i rooted, tried bumped rec 2.8.7.1 directly via flashify, failed, stuck at fastboot mode , no probs till now, hard rebooted using buttons and back to system, than i tried AUTOREC by cloudyfa and when rebooted to recovery, ONLY WHITE LINES, lines moves little, but not anything visisble at all
Tried to go to rec by using hard keys, nothing visible, tried download mode, not detected by computer
Now situation is that mobile is detected as ANDRIOD DEVICE as ALCATEL ADB INTERFACE only and i dont know what to do
i'm sure that my download mode is not intact and no sure about twrp as i cant see anything, please inform if anyone else ever has such issue and what to do with it? have i hard bricked my phone?
not exactly as i know some will surely has the solution? so please help????
Hi everyone, my problem is that I installed AutoRec on my G2 D802 after rooting it with iOroot, the installation goes normally then it shows the go to recovery button, i clicked on it and now it shows vertical white lines and i don't know what is it, when i plug it to the PC it says no driver was found and it shows as Android with the yellow triangle thing (Sorry for my bad english ^^)
I need a solution on how to get the pc to recognize it as G2 or anything else so i can flash it back to stock ASAP,
Please help me :/
PS: I don't know if download mod is working, but recovery works (I think) because the lines change color when i go into recovery but they're still there so i can't really know if it's working or not
http://forum.xda-developers.com/showthread.php?t=2432476 try this thread using the tot method. It got me unbricked pretty well.
Thank you for the reply but my phone isn't recognized by my pc in device manager it shows as Android with yellow triangle and exclamation mark
Any solution ?