Database Users

[Q] Hard Brick D800 - Please Help! At a loss

Any help is appreciated! First some background:
Flashed device to stock using KK 4.4 version d80020c following steps found here http://forum.xda-developers.com/showthread.php?t=2432476. Successfully rooted using directions (and ioroot25) found here https://www.youtube.com/watch?v=HKuedInhdjU&noredirect=1.
Here's where I got into trouble...Downloaded TWRP 2.7 recovery img and flashed via Flashify. Since this step, my D800 has the exact same symptoms found on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
- No download mode (tried many times)
- No recovery (tried many times also)
- Secure booting error
- LG detected as qhsusb_bulk in device manager
- Device is recognized as 15 different drives, one of which contains a folder named image with 79 different files being .B0X files and Microsoft Access Add-in Data files
- Upon restarting, LG logo with secure booting error, then the screen goes black while your phone is still on
I've followed the steps in the thread that matches my G2's symptoms, run ubuntu 13.1 in VM, apply usb filters for my device which is then recognized as either LG Electonics Inc. QHUSB_BULK or Unknown Device 05C6:9006 when running in VM.
Upon running command ls /dev/sd* in VM Ubuntu Terminal, all that is returned is /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 which are the partitions for Ubuntu, no LG.
I've tried to download and update the Qualcomm drivers, device manager tells me that the drivers were recognized, but cannot be installed and do not pass the hash check (Note: PC is running Windows 8.1).
I've spent over 12 hours on this trying to fix this problem, researched and searched everywhere. If I could get ubuntu to recognize the device, I would be able to continue on with the instructions on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
Links for windows 8 qualcomm drivers, suggestions on how to get the device recognized in ubuntu vm, experiences from others in similar situation, or any with experience working with LG to get a repair done if I'm SOL (as in eMMC is fried) would be so helpful right now.
Thank you all!

After flashing recovery did you flash a patched kernel to boot stock kk?
Sent from my LG-D800 using Tapatalk

I had the same, also with a lot of drives etc.
Screen is black but low backlighted?
Then try with pluged USB Cabel in Phone, hold Power button until screen is realy off, then hold the Power Up Button and plug Cabel into PC.
So I got download mode after I tryed many times

I had problems a few weeks ago getting mine to go into Download mode... turned out that the cable I was using was great for charging, but sucked for everything else. Once I switched to a different cable things worked fine and I was able to load D80010c on the device.
I was running D80020c this morning (with the D80010c boot.img to have a custom recovery) and decided to do an update. Since you can't load D80020k if you have the older bootloader I went all the way back to D80010c, updated to D80010o, D80010q, D80020c and finally D80020k. I was able to root that using IOroot and have restored everything back onto my phone.
-Daryel

Thanks so much for the responses! I've tried endlessly to get the device into download mode, and tried a new cable to no avail. Any other suggestions?

The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
d800 partitions are here

Still no luck
bender_007 said:
The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
Click to expand...
Click to collapse
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.

Sneaky Elephant said:
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.
Click to expand...
Click to collapse
As soon as in the background of the white menu (factory reset) the secure boot appear plug it in. I'm not sure how much usb filter helps you(maybe it does) but try installing ubuntu over WUBI installer so your win remains. Or at least try ubuntu from usb stick. So you can know for sure if it's working.

Hi Sneaky E. I have the same issue you have. I'll be following your thread. If I figure anything out I'll let you know. I am also having an issue getting mine to charge now. Have you tried downgrading your TWRP?

VirtualBox Error
VirtualBox recognizes the device is plugged in, but won't allow me to push the device for use in linux. I keep getting this error message:
Failed to attach the USB device LG Electronics Inc. QHSUSB__BULK to the virtual machine Ubuntu.
USB device 'LG Electronics Inc. QHSUSB__BULK' with UUID {d8db3712-b86c-4257-a87b-275cef04e5a3} is busy with a previous request. Please try again later.
Result Code: E_INVALIDARG (0x80070057)
Component: HostUSBDevice
Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a}
Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
Click to expand...
Click to collapse
I've tried all USB ports, 2.0 and 3.0. I feel like if I can get past this there should be no reason linux can't see the partitions in the phone. Please Help!!!

Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!

Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.

ambetdelarosa said:
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.
Click to expand...
Click to collapse
What are the negatives to doing a JTAG fix?

Sneaky Elephant said:
What are the negatives to doing a JTAG fix?
Click to expand...
Click to collapse
Here is your fix.
follow exactly. LINK

ingoljosh said:
Here is your fix.
follow exactly. LINK
Click to expand...
Click to collapse
Followed steps already, still can't boot into recovery.

Sneaky Elephant said:
Followed steps already, still can't boot into recovery.
Click to expand...
Click to collapse
if your device is insured maybe report it lost and pay deductible and get a new one AND NEVER ROOT AGAIN

linux cant recognizy my lg g2 f320L
Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......

dr jam said:
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......
Click to expand...
Click to collapse
The same with me - UP

install ur Ubuntu sing VMware....then partitions will appear.........
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
install ur Ubuntu using VMware......then ur mobile will be recognised and partitions will appear.....

[Q] Stuck in download mode (first screen)

Hey Guys,
I'm stuck in the attached screen.
In this mode my phone is not detected by my computer.
I want to unbrick my phone with the kHz method, but its not working.
Please help me.
Aaron

AaronSchneider said:
Hey Guys,
I'm stuck in the attached screen.
In this mode my phone is not detected by my computer.
I want to unbrick my phone with the kHz method, but its not working.
Please help me.
Aaron
Click to expand...
Click to collapse
Is lg mobile driver installed properly in your computer?

Flow_King said:
Is lg mobile driver installed properly in your computer?
Click to expand...
Click to collapse
Yes sure. Tried it on different PCs. On my device manager its listet at unknown device. When I trie to add the lg drivers manually to the device, Ill get errors. They don't fit.
Edit:
Now its listed as COM6.

AaronSchneider said:
Hey Guys,
I'm stuck in the attached screen.
In this mode my phone is not detected by my computer.
I want to unbrick my phone with the kHz method, but its not working.
Please help me.
Aaron
Click to expand...
Click to collapse
i have the same thing

I have the exact same issue. I was running a custom ROM with TWRP recovery and i tried to do a factory reset from inside the Android settings. After it restarted i got stuck in a boot loop showing the TWRP logo again and again. When i tried to restart the device it was loading the ROM but ended up in a black screen and after few seconds rebooted again. When i try to enter Download mode to flash a new ROM i get stuck on the 1st screen (like on the OP's photo) and the device is not recognized by the Device Manager. I tried many different drivers, cables and USB ports without result. Any suggestion would be appreciated.

[Q] L01F no download mode, no usb reading.

Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 

unkn0wn68 said:
Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 
Click to expand...
Click to collapse
Can someone help me please ?

unkn0wn68 said:
Can someone help me please ?
Click to expand...
Click to collapse
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249

ronen1n said:
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
Click to expand...
Click to collapse
Actually i'm trying to repair it since October 2014. No-one knows the solution. I went to 3 different GSM Services and they don't know what to do...
So...when i'm trying to put it in download mode it stays like this and the PC doesn't recognize it.
The only way to connect the phone to the computer is to put it in recovery mode (Backup & Restore) by holding Volume Up and Power Button at the same time with the phone turned off. It should appear something like this. The PC recognizes the phone but only in ADB. Look.
The third possible screen, which also is useless is this by typing in the CMD the following: "adb reboot recovery" (click). Here, the PC doesn't recognize the phone too.
Fastboot doesn't work.
And that's my problem. I don't know what to do.

unkn0wn68 said:
The PC recognizes the phone but only in ADB. Look.
Click to expand...
Click to collapse
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.

iowabowtech said:
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
Click to expand...
Click to collapse
I have permission problems...

unkn0wn68 said:
I have permission problems...
Click to expand...
Click to collapse
?
Your screenshot above shows the device being recognized via adb in recovery. What permission problems?

[SOLVED][HELP] Hard Brick LG G2! no recovery, no fastboot, no download mode!

Hello!
Good afternoon masters!
My LG G2 was hard bricked after i [very intelligent man (sarcasm)] flashed a ROM and Efficient Kernel without wipe nothing!
My phone can't enter in recovery mode, download or fastboot.. the PC recognize him in PdaNet installed, but in ADB i can't execute any command
because the status of device is "unauthorized" and i don't have access to the screen to confirm the authorization.
Obs:
Red LED light ON while pluged in PC.
Try to ON the device shows blank stripes in LG logo boot and shades of gray.. after this the screens off.
Thanks for all and sorry for my english!
[EDIT]:
Aaaw Yeah! I won, masters!
The problem has solved now!
1: I followed this tutorial
Then: I followed the tutorial that the master dredd2099 passed me. Thank you too man!
Obs: if you don't have Linux to follow the tutorial passed by dredd2009.. try this tutorial on youtube.
Obs 2: if your PC recognize the device like qhsusb_bulk 9008 (don't recognize disk parts in PC.. only COM port in Device Manager) instead of 9006.. try this tutorial
Thanks for all! [very happy]

have you checked here, might help, sounds similar at least

dredd2099 said:
have you checked here, might help, sounds similar at least
Click to expand...
Click to collapse
Thanks for answer my friend!
In the post of your reply.. the PC detects device as qhsusb_bulk with multiple drivers, in my case unfortunately not.
In my case, the PC only detects device in ADB as unauthorized.
Thanks a lot .

LG L Fino (D295 no download )

Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.

Anyone help me (
anhtuan1992s said:
Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.
Click to expand...
Click to collapse
Pls help me

Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.

Ben Flanders said:
Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.
Click to expand...
Click to collapse
would you like to send my the link (

Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47

thks a lot

Ben Flanders said:
Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47
Click to expand...
Click to collapse
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:

atiPL said:
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:
Click to expand...
Click to collapse
Hi guy, in my researches I saw a thread about a problem that when cellphone is connected in the computer, computer recognizes only as qualcomm.
I don't remember exactly how to fix it, but take a look in the forums, i'm sure that you'll find a solution
sorry for don't help you

Help!
phone (lg295) is not included.
connecting see it as qualcomm 9800.
It does not respond to anything. I tried to restore it from the next topic - but there is only a way for the 290 ....
what to do...?

Any help (

anhtuan1992s said:
Any help (
Click to expand...
Click to collapse
See what i wrote above. There is a thread about this issue.