Hi everyone, my problem is that I installed AutoRec on my G2 D802 after rooting it with iOroot, the installation goes normally then it shows the go to recovery button, i clicked on it and now it shows vertical white lines and i don't know what is it, when i plug it to the PC it says no driver was found and it shows as Android with the yellow triangle thing (Sorry for my bad english ^^)
I need a solution on how to get the pc to recognize it as G2 or anything else so i can flash it back to stock ASAP,
Please help me :/
PS: I don't know if download mod is working, but recovery works (I think) because the lines change color when i go into recovery but they're still there so i can't really know if it's working or not
http://forum.xda-developers.com/showthread.php?t=2432476 try this thread using the tot method. It got me unbricked pretty well.
Thank you for the reply but my phone isn't recognized by my pc in device manager it shows as Android with yellow triangle and exclamation mark
Any solution ?
Related
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
gugutm1 said:
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
Click to expand...
Click to collapse
Install LG PC Suite, the LG Mobile Support Tool and the LG L7 USB driver. Then try again. Make sure your phone is set on 3GQCT and EMERGENCY on KDZ.
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
F4uzan said:
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
Click to expand...
Click to collapse
hi there im stuck in lg logo i had 4.4.2 but i had some problems with my gps so i decided to go back on v20d i used kdz emergency 3gqct battery out phone in emergency mode and im stuck in lg logo please can someone help me and sorry if my english is bad im from croatia.
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
hi everyone,
i started this thread to inform something weird happened to me and for some good help from our precious devs here
I have 3 lg g2's , all d802, 2 rooted and enjoying different roms on it, third one was on original stock 80220c-hkg-xx, so i rooted, tried bumped rec 2.8.7.1 directly via flashify, failed, stuck at fastboot mode , no probs till now, hard rebooted using buttons and back to system, than i tried AUTOREC by cloudyfa and when rebooted to recovery, ONLY WHITE LINES, lines moves little, but not anything visisble at all
Tried to go to rec by using hard keys, nothing visible, tried download mode, not detected by computer
Now situation is that mobile is detected as ANDRIOD DEVICE as ALCATEL ADB INTERFACE only and i dont know what to do
i'm sure that my download mode is not intact and no sure about twrp as i cant see anything, please inform if anyone else ever has such issue and what to do with it? have i hard bricked my phone?
not exactly as i know some will surely has the solution? so please help????
Hello i have a ls980 my problem is i installed twrp with autorec for d802 to my ls980 after reboot screen had been black with white lines. No recovery and download mode when i connect to my pc on device manager it is seen as an android adb device no com ports. How can i fix this :crying::crying:
i have the same problem...this autorec app is wrecking the g2....did u find any fix?
Same problem
tuxim said:
i have the same problem...this autorec app is wrecking the g2....did u find any fix?
Click to expand...
Click to collapse
Hello everyone..
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know is there a Hardware problem or it is a software issue??
Kindly help me to fix this issue...
obin.arssy said:
Hello everyone..
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know is there a Hardware problem or it is a software issue??
Kindly help me to fix this issue...
Click to expand...
Click to collapse
i gave the phone to my dad and he went and showed it to some mechanics...they changed the display and flashed a stock rom and seemed to fixed the issue...dont know any details though...all i can say is im never modding this phone again
Hi all i'm new here and this is my first thread hope it's in the right place
well, my problem is that my g2 is bricked afterI installed autorec (for twrp) everything was fine till i hit the go to recovery, now it shows white lines that fades then comeback, i can't get it to download mod and my pc is recognizing the phone as Android with the yellow triangle, and yes i installed lg drivers and adb etc, even adb won't recognize it
hope i can find a solution here
You should browse the great G2 Index by @Art Vandelay. There are all major topics listed at once.
http://forum.xda-developers.com/lg-g2/general/05-10-index-guides-fixes-roots-t3218178
Thank you for the reply but i didn't really find the right case for my phone, because i can't exactly determinate which case is the right one, because of the lines on the screen all i know is that it can't go into download mod and recovery and PC recognize it as android only