Any help is appreciated! First some background:
Flashed device to stock using KK 4.4 version d80020c following steps found here http://forum.xda-developers.com/showthread.php?t=2432476. Successfully rooted using directions (and ioroot25) found here https://www.youtube.com/watch?v=HKuedInhdjU&noredirect=1.
Here's where I got into trouble...Downloaded TWRP 2.7 recovery img and flashed via Flashify. Since this step, my D800 has the exact same symptoms found on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
- No download mode (tried many times)
- No recovery (tried many times also)
- Secure booting error
- LG detected as qhsusb_bulk in device manager
- Device is recognized as 15 different drives, one of which contains a folder named image with 79 different files being .B0X files and Microsoft Access Add-in Data files
- Upon restarting, LG logo with secure booting error, then the screen goes black while your phone is still on
I've followed the steps in the thread that matches my G2's symptoms, run ubuntu 13.1 in VM, apply usb filters for my device which is then recognized as either LG Electonics Inc. QHUSB_BULK or Unknown Device 05C6:9006 when running in VM.
Upon running command ls /dev/sd* in VM Ubuntu Terminal, all that is returned is /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 which are the partitions for Ubuntu, no LG.
I've tried to download and update the Qualcomm drivers, device manager tells me that the drivers were recognized, but cannot be installed and do not pass the hash check (Note: PC is running Windows 8.1).
I've spent over 12 hours on this trying to fix this problem, researched and searched everywhere. If I could get ubuntu to recognize the device, I would be able to continue on with the instructions on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
Links for windows 8 qualcomm drivers, suggestions on how to get the device recognized in ubuntu vm, experiences from others in similar situation, or any with experience working with LG to get a repair done if I'm SOL (as in eMMC is fried) would be so helpful right now.
Thank you all!
After flashing recovery did you flash a patched kernel to boot stock kk?
Sent from my LG-D800 using Tapatalk
I had the same, also with a lot of drives etc.
Screen is black but low backlighted?
Then try with pluged USB Cabel in Phone, hold Power button until screen is realy off, then hold the Power Up Button and plug Cabel into PC.
So I got download mode after I tryed many times
I had problems a few weeks ago getting mine to go into Download mode... turned out that the cable I was using was great for charging, but sucked for everything else. Once I switched to a different cable things worked fine and I was able to load D80010c on the device.
I was running D80020c this morning (with the D80010c boot.img to have a custom recovery) and decided to do an update. Since you can't load D80020k if you have the older bootloader I went all the way back to D80010c, updated to D80010o, D80010q, D80020c and finally D80020k. I was able to root that using IOroot and have restored everything back onto my phone.
-Daryel
Thanks so much for the responses! I've tried endlessly to get the device into download mode, and tried a new cable to no avail. Any other suggestions?
The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
d800 partitions are here
Still no luck
bender_007 said:
The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
Click to expand...
Click to collapse
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.
Sneaky Elephant said:
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.
Click to expand...
Click to collapse
As soon as in the background of the white menu (factory reset) the secure boot appear plug it in. I'm not sure how much usb filter helps you(maybe it does) but try installing ubuntu over WUBI installer so your win remains. Or at least try ubuntu from usb stick. So you can know for sure if it's working.
Hi Sneaky E. I have the same issue you have. I'll be following your thread. If I figure anything out I'll let you know. I am also having an issue getting mine to charge now. Have you tried downgrading your TWRP?
VirtualBox Error
VirtualBox recognizes the device is plugged in, but won't allow me to push the device for use in linux. I keep getting this error message:
Failed to attach the USB device LG Electronics Inc. QHSUSB__BULK to the virtual machine Ubuntu.
USB device 'LG Electronics Inc. QHSUSB__BULK' with UUID {d8db3712-b86c-4257-a87b-275cef04e5a3} is busy with a previous request. Please try again later.
Result Code: E_INVALIDARG (0x80070057)
Component: HostUSBDevice
Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a}
Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
Click to expand...
Click to collapse
I've tried all USB ports, 2.0 and 3.0. I feel like if I can get past this there should be no reason linux can't see the partitions in the phone. Please Help!!!
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.
ambetdelarosa said:
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.
Click to expand...
Click to collapse
What are the negatives to doing a JTAG fix?
Sneaky Elephant said:
What are the negatives to doing a JTAG fix?
Click to expand...
Click to collapse
Here is your fix.
follow exactly. LINK
ingoljosh said:
Here is your fix.
follow exactly. LINK
Click to expand...
Click to collapse
Followed steps already, still can't boot into recovery.
Sneaky Elephant said:
Followed steps already, still can't boot into recovery.
Click to expand...
Click to collapse
if your device is insured maybe report it lost and pay deductible and get a new one AND NEVER ROOT AGAIN
linux cant recognizy my lg g2 f320L
Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......
dr jam said:
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......
Click to expand...
Click to collapse
The same with me - UP
install ur Ubuntu sing VMware....then partitions will appear.........
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
install ur Ubuntu using VMware......then ur mobile will be recognised and partitions will appear.....
Hello i have a ls980 my problem is i installed twrp with autorec for d802 to my ls980 after reboot screen had been black with white lines. No recovery and download mode when i connect to my pc on device manager it is seen as an android adb device no com ports. How can i fix this :crying::crying:
i have the same problem...this autorec app is wrecking the g2....did u find any fix?
Same problem
tuxim said:
i have the same problem...this autorec app is wrecking the g2....did u find any fix?
Click to expand...
Click to collapse
Hello everyone..
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know is there a Hardware problem or it is a software issue??
Kindly help me to fix this issue...
obin.arssy said:
Hello everyone..
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know is there a Hardware problem or it is a software issue??
Kindly help me to fix this issue...
Click to expand...
Click to collapse
i gave the phone to my dad and he went and showed it to some mechanics...they changed the display and flashed a stock rom and seemed to fixed the issue...dont know any details though...all i can say is im never modding this phone again
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
prnv said:
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
Click to expand...
Click to collapse
i would suggest just to be sure before you can do more harm.. to post and ask in the goign back to stock thread.. you will get help there
Same issue
I have the same story with my LG G2 D802 any luck?
I have the same issue... Please give updates on your progress
I have Got The Same Issue.....no COM port so as to flash tot, i cant also flash using flash tools. Somebody Help
Same here, you guys burn your G2?
Looks like I'm a bit late for the party. Well i ended up my lg g2 ls980 (sold as d802) in the same condition. I fixed it by booting into qhsusb_bulk mode by shorting the capacitors and using srktool. Now my phone can boot into download mode!
(Note: this method only works if your phone shows up as qhsusb_bulk and not qdloader or something like that)
Hi everyone, my problem is that I installed AutoRec on my G2 D802 after rooting it with iOroot, the installation goes normally then it shows the go to recovery button, i clicked on it and now it shows vertical white lines and i don't know what is it, when i plug it to the PC it says no driver was found and it shows as Android with the yellow triangle thing (Sorry for my bad english ^^)
I need a solution on how to get the pc to recognize it as G2 or anything else so i can flash it back to stock ASAP,
Please help me :/
PS: I don't know if download mod is working, but recovery works (I think) because the lines change color when i go into recovery but they're still there so i can't really know if it's working or not
http://forum.xda-developers.com/showthread.php?t=2432476 try this thread using the tot method. It got me unbricked pretty well.
Thank you for the reply but my phone isn't recognized by my pc in device manager it shows as Android with yellow triangle and exclamation mark
Any solution ?
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Kicha0 said:
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Click to expand...
Click to collapse
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Jan Philipp said:
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
I forgot to add this:
For D800:
Master archive of 5 files needed to do this:
https://www.androidfilehost.com/?fid=95747613655047114
Just had the same issue and answered in another thread but I'll quote myself again.
https://forum.xda-developers.com/sho....php?t=2663369
https://www.youtube.com/watch?v=Lg693AYgoTo
ATT 4.4.2 KitKat:
https://mega.nz/#!n0RTUYZD!MVntiPxuyW...
ATT 4.2.2 JellyBean:
https://mega.nz/#!e5RERS4L!FjZyopcvwM...
T-Mobile 4.2.2 JellyBean:
https://mega.nz/#!qsRSBDwD!KKCETp41O1...
Modified DLL file if nothing else works:
https://mega.nz/#!f5xTGKrC!ifBCOAnK4j...
I had a very similar problem with it getting stuck at the logo after pushing supersu to the phone. I followed Supersport every single step of the way in his video. I think his links are the only valid ones online now, so just download them and reflash your phone. If your G2 is anything like mine, drivers will never appear to be installed correctly and it never restarts, only shuts down.
His method is:
1) Download and install LG drivers on PC
2) Download and install the flash tool and patch it
3) Download and load the .tot and .dll files into the flash tool
4) Enter download mode on G2 by holding volume up while connecting USB
5) Switch G2 Com port to 41 in device manager
6) Once Flash tool shows that all ports are ready, power down G2 and disconnect
7) Hold volume up and reconnect to get back into download mode
8) LG Flash tool starts flashing
9) Complete
Note: If your G2 was screwed up as bad as mine, it'll say failed but all the main system files will load to the device before it restarts and it'll even shut itself off while doing it's installation on first reboot. Mine somehow was still revived from this state with his method.