Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
flash by Odin this kernel SpaceX-Kernel-v0.2_N910C(Dev).tar.md5 and after that flash any rom you whant also by Odin
if you have an backup ....restore your backup , flash the kernel and after that flash by Odin the rom you want
Good Luck
Vytkaz said:
Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
Click to expand...
Click to collapse
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Styrke said:
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Click to expand...
Click to collapse
Haha!
Related
HEY I CANNOT FLASH FIRMWARE ,WHEN I TRY I GET THIS ERROR IN ODIN
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sbl.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> BcmCP.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLZ HELP ME ASAP
please post question in the questions and answer section in future
edit thread moved to q & a
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
marcussmith2626 said:
please post question in the questions and answer section in future
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
Click to expand...
Click to collapse
sorry i was worried
hi guys , the other day i thought of flashing a stock rom on my g900f using MOBILE Odin (forgot to do some research about it) and flashed it . now my phone isnt booting . i can go to the download mod but i tried flashing 3 different stock firmwares on my phone but odin fails
this is the odin log (i think thats what its called)
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXA1ANG3_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried different PCs but no luck . i was able to flash cwm successfully using odin and tried flashing Alliance rom with cwm but when it reaches half of the installation , the screen goes black and returned to the start menu of the recovery a . i also tried twrp but no luck . plz help me my phone is lying useless for 2 DAYS!!
Any sort of help is appretiated
Hi, I have this tablet but came with only english language, it has installed the version T230NUOVU0ANK7
I want to install a rom with spanish language, in samsung-updates site there are not latin america based roms, so I want to know if it is possible to install a T230 stock rom in a T230NU tablet
Thanks!!!
tttony said:
Hi, I have this tablet but came with only english language, it has installed the version T230NUOVU0ANK7
I want to install a rom with spanish language, in samsung-updates site there are not latin america based roms, so I want to know if it is possible to install a T230 stock rom in a T230NU tablet
Thanks!!!
Click to expand...
Click to collapse
Yes it is possible. The only thing you will lose is IR (remote) function. I have the Stock SM-T230NU kernel you can flash after you flash a SM-T230 ROM if you want.
SM-T230NU stock kernel : https://www.androidfilehost.com/?fid=95864024717074738
Check these ROMs all for SM-T230/SM-T230NU :
Stock ROM
http://forum.xda-developers.com/tab-4/development/rom-stockrom-series-v1-0-10-10-2014-t2901172
ACHERON ROM
http://forum.xda-developers.com/tab-4/development/rom-stock-t230-nu-acheron-rom-v1-0-2015-t3000107
Prism
http://forum.xda-developers.com/tab-4/development/rom-prism-barebone-v1-t2991013
Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> loke_1st.bin
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?
tttony said:
Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:14)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
loke_1st.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?
Click to expand...
Click to collapse
Yes I would assume so.
If your going to flash a full tar I'd grab the official one ment for your device
Check out the firmware links from here : http://forum.xda-developers.com/showthread.php?p=58428539
tttony said:
Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> loke_1st.bin
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?
Click to expand...
Click to collapse
Yes of course. So anything you do not succeed. It is better to try to add additional languages to this method http://forum.xda-developers.com/tab-4/general/adding-languages-devices-t230nu-t330nu-t2916849
P.S. Only first flashing your native firmware.
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Syed Muneeb said:
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Click to expand...
Click to collapse
Have you tried downloading another firmware and flashing it?
No I jst download only 1 firmware for sm-n910h I didnt try another I downloaded from samt
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Syed Muneeb said:
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Click to expand...
Click to collapse
Can you get into recovery mode on your phone and restore an old kitkat backup?
No I couldn't I flash lolipop it's working but I want to downgrade to kit kat
Does downgrade cause hard brick?
I think you have to stay on lollipop now as the bootloader got updated. If you flash lollipop your phone should be back working
Sent from my SM-N910F using Tapatalk
Same thing happened to me. After the odin fail message, I removed the battery, went to download mode again and flashed twrp 2.8.6.1 (latest one). After flashing, it rebooted and working perfectly fine now.
In my own case, I upgraded to marshmallow but am unable to make calls. Saying "Not Registered to Network"
I have a note 4 sm-n910c, I want to downgrade from android 6 to 5.1.1, I download the 5.1.1 rom from sammobile.
And I also downloaded Odin.
What do I need to select in odin in order to downgrade to 5.1.1?is there any guide to it?
Thanks!!
just try it and got error, please help how to fix it!!
i searched alot at xda forum and google and didnt find an answer
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> XXXX.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)