[Q] Can I install a stock rom from T230 in T230NU? - Galaxy Tab 4 Q&A, Help & Troubleshooting

Hi, I have this tablet but came with only english language, it has installed the version T230NUOVU0ANK7
I want to install a rom with spanish language, in samsung-updates site there are not latin america based roms, so I want to know if it is possible to install a T230 stock rom in a T230NU tablet
Thanks!!!

tttony said:
Hi, I have this tablet but came with only english language, it has installed the version T230NUOVU0ANK7
I want to install a rom with spanish language, in samsung-updates site there are not latin america based roms, so I want to know if it is possible to install a T230 stock rom in a T230NU tablet
Thanks!!!
Click to expand...
Click to collapse
Yes it is possible. The only thing you will lose is IR (remote) function. I have the Stock SM-T230NU kernel you can flash after you flash a SM-T230 ROM if you want.
SM-T230NU stock kernel : https://www.androidfilehost.com/?fid=95864024717074738
Check these ROMs all for SM-T230/SM-T230NU :
Stock ROM
http://forum.xda-developers.com/tab-4/development/rom-stockrom-series-v1-0-10-10-2014-t2901172
ACHERON ROM
http://forum.xda-developers.com/tab-4/development/rom-stock-t230-nu-acheron-rom-v1-0-2015-t3000107
Prism
http://forum.xda-developers.com/tab-4/development/rom-prism-barebone-v1-t2991013

Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> loke_1st.bin
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?

tttony said:
Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:14)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
loke_1st.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?
Click to expand...
Click to collapse
Yes I would assume so.
If your going to flash a full tar I'd grab the official one ment for your device
Check out the firmware links from here : http://forum.xda-developers.com/showthread.php?p=58428539

tttony said:
Thanks g_ding84 for the reply!
But I'm having problem...
I've downloaded the CHO-T230XXU0ANJ4-20141128134509 stock rom, it's from Chile
I tried to flash the rom with Odin 3.09, but failed:
Here the Odin screenshot
The log:
Code:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230XXU0ANJ4_T230UVS0ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> loke_1st.bin
<ID:0/014> NAND Write Start!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've flashed many Samsung devices with Odin and never had a problem, this is happening because I'm trying to flash the wrong rom?
Click to expand...
Click to collapse
Yes of course. So anything you do not succeed. It is better to try to add additional languages to this method http://forum.xda-developers.com/tab-4/general/adding-languages-devices-t230nu-t330nu-t2916849
P.S. Only first flashing your native firmware.

Related

HELP !!! Galaxy s5 BRICKED!!!!!!

hi guys , the other day i thought of flashing a stock rom on my g900f using MOBILE Odin (forgot to do some research about it) and flashed it . now my phone isnt booting . i can go to the download mod but i tried flashing 3 different stock firmwares on my phone but odin fails
this is the odin log (i think thats what its called)
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXA1ANG3_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried different PCs but no luck . i was able to flash cwm successfully using odin and tried flashing Alliance rom with cwm but when it reaches half of the installation , the screen goes black and returned to the start menu of the recovery a . i also tried twrp but no luck . plz help me my phone is lying useless for 2 DAYS!!
Any sort of help is appretiated

[Q] Help!! I think my phone got brick

Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!

Help please !!!

Hey guys, I m trying to flash stock rom on my S3 Neo GT-I9301I but i dont work. here is odin code. i tried almost everything please help. it stucks always. even when i try to install a recovery it stucks at recovery.img. again here is the code
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUBNG4_G7102ODDBNG4_G7102DDUBNF4_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
PLEASE HELP ME GUYS :crying::crying:
You have selected the wrong file, that is for another smartphone
Alessandro's said:
You have selected the wrong file, that is for another smartphone
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXXUANL1_I9301IOXAUANL1_I9301IXXUANI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
My device is normaly a GT-I9301I but i suddenly installed GT-I9300I. The only things i can do with phone right now is: entering recovery(twrp) and downlaod mod.
I want now the stock rom of GT-I9301I what can i do now?? :crying::crying:
Flash the right firmware for your phone.
Jhnsn said:
Flash the right firmware for your phone.
Click to expand...
Click to collapse
As you can see the odin code above it stucks at sbl1.mdn or am i doing something wrong?
I tried it with another Firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXXUAOJ1_I9301ITTRAOH2_I9301IXXUAOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
again Stuck
No mather what firmware i try to install everytime it stucks
HELP PLEASE
AnroidLover said:
Hey guys, I m trying to flash stock rom on my S3 Neo GT-I9301I but i dont work. here is odin code. i tried almost everything please help. it stucks always. even when i try to install a recovery it stucks at recovery.img. again here is the code
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUBNG4_G7102ODDBNG4_G7102DDUBNF4_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
PLEASE HELP ME GUYS :crying::crying:
Click to expand...
Click to collapse
or try another version of odin
Alessandro's said:
or try another version of odin
Click to expand...
Click to collapse
already tried. but where should i put the firmware? PDA, CSC, PHONE, AP? i tried already AP and PDA and almost every version of odin
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Alessandro's said:
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Click to expand...
Click to collapse
Thank u A lot, i m gonna try it.
AnroidLover said:
already tried. but where should i put the firmware? PDA, CSC, PHONE, AP? i tried already AP and PDA and almost every version of odin
Click to expand...
Click to collapse
in the newer version of odin AP is the same of PDA
of the older version
Alessandro's said:
http://www.sammobile.com/firmwares/download/64471/I9301IXCUAOL3_I9301IITVAOL1_ITV/
this is one of the latest firmware avaiable on sammobile for gt-i9301i
http://forum.xda-developers.com/attachment.php?attachmentid=1140630
this is odin
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed :crying:
WAY 1 : ------- VERY DANGEROUS, NOT TESTED, I'M NOT REAPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE, I WARNED YOU.
You need to get TWRP recovery, then download the Utility from HERE and then mount everything, so that your computer can access your device and then put your Utility wherever you want. Then go to install and select the utility.zip and after the program opens then go to next > primary > wipe System and cache and data and dalvik cache... MAKE A BACKUP FIRST! and then go to ODIN mode and flash your OS...
WAY 2 ----- BETTER
Go to TWRP, wipe all data including system and go to ODIN mode and flash the OS, NOT TESTED ASWELL BUT TRY WITHOUT DELETING SYSTEM FIRST!!!
WAY 3 -------
Flash a custom ROM like CM... if you need help at it, ASK! I'll reply to you as soon as possible!
Good Luck!
FireGhost1337 said:
WAY 1 : ------- VERY DANGEROUS, NOT TESTED, I'M NOT REAPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE, I WARNED YOU.
You need to get TWRP recovery, then download the Utility from HERE and then mount everything, so that your computer can access your device and then put your Utility wherever you want. Then go to install and select the utility.zip and after the program opens then go to next > primary > wipe System and cache and data and dalvik cache... MAKE A BACKUP FIRST! and then go to ODIN mode and flash your OS...
WAY 2 ----- BETTER
Go to TWRP, wipe all data including system and go to ODIN mode and flash the OS, NOT TESTED ASWELL BUT TRY WITHOUT DELETING SYSTEM FIRST!!!
WAY 3 -------
Flash a custom ROM like CM... if you need help at it, ASK! I'll reply to you as soon as possible!
Good Luck!
Click to expand...
Click to collapse
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
AnroidLover said:
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
Click to expand...
Click to collapse
Hmm... seems to be a very advanced error but don't worry!
WAY 4 ---------- Safest
Install newest odin and don't check anything in ODIN's settings, the rom will do all that stuff
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
AnroidLover said:
WAY 1
---------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9301IXCUAOL3_I9301IITVAOL1_I9301IXXUAOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WAY 2
---------
Tried allready. Non worked for me. Like always Stuck.
WAY 3
---------
Tried. It bring me back to recovery when i m trying to boot it
Click to expand...
Click to collapse
Oh by the way you made way 3? You installed the custom rom? As a zip file? Like Cyanogen? And it took you back to recovery? What recovery do you have? And did you UNCHECK the signature check? IT'S VERY IMPORTANT
FireGhost1337 said:
Hmm... seems to be a very advanced error but don't worry!
WAY 4 ---------- Safest
Install newest odin and don't check anything in ODIN's settings, the rom will do all that stuff
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
Oh by the way you made way 3? You installed the custom rom? As a zip file? Like Cyanogen? And it took you back to recovery? What recovery do you have? And did you UNCHECK the signature check? IT'S VERY IMPORTANT
Click to expand...
Click to collapse
I installed Revolution HD as a zip file and i m using TWRP and yes it took me back. Zip file signature was and is unchecked. When i was installing the custom rom everything went fine with the installation of the custom rom.
And u mean with the settings F. Reset Time and other Stuff like that? And where should i put the stock rom? CSC or AP?
I tried with AP :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
By the way my downlaod settings are:
ODIN MODE
PRODUCT NAME: GT-I9300I (ist falsche rom. muss GT-I9301I)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
AnroidLover said:
I installed Revolution HD as a zip file and i m using TWRP and yes it took me back. Zip file signature was and is unchecked. When i was installing the custom rom everything went fine with the installation of the custom rom.
And u mean with the settings F. Reset Time and other Stuff like that? And where should i put the stock rom? CSC or AP?
I tried with AP :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
By the way my downlaod settings are:
ODIN MODE
PRODUCT NAME: GT-I9300I (ist falsche rom. muss GT-I9301I)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
Click to expand...
Click to collapse
Try to change cable usb
Alessandro's said:
Try to change cable usb
Click to expand...
Click to collapse
I tried. Failed again ! :crying::crying:
HELP ME PLEASE :crying::crying:

			
				
Alessandro's said:
Click to expand...
Click to collapse
That problem is omg. I dont know where the problem is :crying:

			
				
Alessandro's said:
Click to expand...
Click to collapse
Hey Jow, i got another usb cable. Now its says always Unknwon Device (also in Odin no added Message)

			
			
			
			
			
			
			
			



			
			
			

			
		

	
		

			
Samsung Galaxy S4 failed with flashing stock firmware 5.0.1
			
			
			
				
Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile

			
				
Luka765 said:
Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile
Click to expand...
Click to collapse
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.

			
				
Reply
GDReaper said:
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.
Click to expand...
Click to collapse
How to solve this ?

			
				
Luka765 said:
How to solve this ?
Click to expand...
Click to collapse
Obviously flash the same or newer firmware.

			
				
Another way?

			
				
Boot into download mode and confirm the phone's model #.
ROMs for the i9505 are here: http://www.sammobile.com/firmwares/database/GT-I9505/

			
				
How? Where can confirm when you get into Download Mode , my country is Serbia I'm here and downloaded firmware , and what we are now talking about here ?
Sorry for bad English

			
				
Give us all the info displayed in download mode.

			
			
			
			
			
			
			
			
			
			



			

			
		

	
		

			
desperate for some help with a sm-900f
			
			
			
				
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1

			
				
fatfei said:
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Just an update, i have loaded twrp on there but too scared to touch anything else pending help

			
				
Hi try this guide find a g900f pit file or if you have made a backup of your own and flash it via odin then try again to flash stock
Url : forum.xda-developers.com/showthread.php?t=2659635

			
				
Unfortunately I now get this error on Odin
D:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

			
				
force alarm, i was just being impatient. all working. Thank you very much for the help

			
				
No problem mate ?

			
			
			
			
			
			
			
			
			
			

			
		

	
	
	



	
	







			

		



		

			
Categories

			
		


		

			
Resources