Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!
Related
Hi all,
I was running an official ROM (MI8) and I tried to root it, of course it went wrong
Now I'm getting the "Firmware Upgrade encountered an issue" error message while booting. I have tried to facyory reset with kies and it does work (after downloading the firmware it says it doesnt recognize the phone)
I have access Download Mode, I have tried to push offical fw's with oding , no luck I get :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
does anyone have an idea ?
PS : sorry for the topic title, Cant edit anymore, will have to wait for a couple of minutes
Different usb port, different pc, different usb cable, reinstall drivers, make sure Kies is not running in the background.
Thanks it worked
Sorry for another stupid thread like this I was under panic lol
Sent from my GT-I9505 using xda app-developers app
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Honter1 said:
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Click to expand...
Click to collapse
Hi there Follow the tutorial from this thread http://forum.xda-developers.com/showpost.php?p=41072377&postcount=1 Have a nice day.
Hi,
I have a Galaxy S4 I9500 and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the yellow triangle screen with " Firmware upgrade encountered an issue....."
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:2
I have also tried with to ODIN with a PIT file and looked at various forums and tried different things however nothing seems to work. Is there anything else i can do or is my phone busted?
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Lennyz1988 said:
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Click to expand...
Click to collapse
Thanks! That sorted it! Downloaded the latest firmware and it worked! Had taken so long to get it sorted! :laugh::laugh::laugh:
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4
Hello to all,
i am using an S4 GT-I9500 indian variant,
while flashing the phone with the stock firmware i did a mistake and clicked on the wrong button "BL" instead of "AP"
in my ODIN software and the operation failed with the button "BL".
now i tried to installing the firmware by using the "AP" button but i am getting the following message in the ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have tried it using recovery mode with CWM and TWRP boot loaders, and i am not able to wipe the data using the TWRP boot loader.....
and even tried connecting to samsung Kies it gives me an error message as "GT-I9500" does not support initialising....
so can anyone please help me get my phone back to running....
Thanks in advance......
Are you flashing the latest stock ROM with Odin?
STOCK Rom
Are you flashing the latest stock ROM with Odin?
Yes, My phone was stuck in Samsung logo (Boot loop)
So i tried flashing it with the stock ROM with Odin
when i tried it did not complete the flashing, instead it ended up with a Blank screens with the message that "Firmware encountered an issue please select recovery mode in Kies and try Again".
And when i try flashing the Stock ROM with Odin this the following tread that i am getting.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried using Odin 3.07, the original Samsung usb cable, or a different usb 2.0 port?