I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Syed Muneeb said:
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Click to expand...
Click to collapse
Have you tried downloading another firmware and flashing it?
No I jst download only 1 firmware for sm-n910h I didnt try another I downloaded from samt
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Syed Muneeb said:
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Click to expand...
Click to collapse
Can you get into recovery mode on your phone and restore an old kitkat backup?
No I couldn't I flash lolipop it's working but I want to downgrade to kit kat
Does downgrade cause hard brick?
I think you have to stay on lollipop now as the bootloader got updated. If you flash lollipop your phone should be back working
Sent from my SM-N910F using Tapatalk
Same thing happened to me. After the odin fail message, I removed the battery, went to download mode again and flashed twrp 2.8.6.1 (latest one). After flashing, it rebooted and working perfectly fine now.
In my own case, I upgraded to marshmallow but am unable to make calls. Saying "Not Registered to Network"
Related
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
musheercmr said:
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.
when i try to flash a stock room using Odin getting below error:
power + home + volume down > AP > choose tar file(N9005XXUDML2) > start
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help please.... :crying::crying::crying:
Click to expand...
Click to collapse
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
xclub_101 said:
Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader
You can try to write stock 4.4.
Click to expand...
Click to collapse
what if flash N9005XXUEND6 using odin? will it work ?
musheercmr said:
what if flash N9005XXUEND6 using odin? will it work ?
Click to expand...
Click to collapse
If it is for the same model and region as your N9005 it could/should work, otherwise you might still see problems. Be careful not to confuse Hong-Kong 16GB model with EU 32GB models, also there have been some problems with other hardware or CSC combinations.
HEY I CANNOT FLASH FIRMWARE ,WHEN I TRY I GET THIS ERROR IN ODIN
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sbl.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> BcmCP.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLZ HELP ME ASAP
please post question in the questions and answer section in future
edit thread moved to q & a
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
marcussmith2626 said:
please post question in the questions and answer section in future
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
Click to expand...
Click to collapse
sorry i was worried
I followed the instructions here http://forum.xda-developers.com/gal...ng-rooting-t2926642/post56453100#post56453100
model no sghI337
baseband i337ucufnb1
my phone stuck in firmware upgrade encountered an issue please select recovery mode in kies
as previously told to me by others that the phone is not rooted got ahead ask me anything i will tell you more about my device i just want imy device back on stock screw rooting and a custom rom
i am using this phone on a different carrier and different country i got it in a way it could be used on any carrier please help
on oden i see this and even after hours nothing happens <ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> sbl2.mbn
<ID:0/011> sbl3.mbn
<ID:0/011> rpm.mbn
<ID:0/011> tz.mbn
<ID:0/011> boot.img
If you can still get into download mode, it's not bricked. Try different USB ports, cables, computers if possible. Make sure you downloaded the latest version of the Samsung drivers also. And which version of ODIN are you using? You could always try switching to 3.07<>3.09 if you aren't already using one or the other.
Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile
Luka765 said:
Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile
Click to expand...
Click to collapse
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.
Reply
GDReaper said:
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.
Click to expand...
Click to collapse
How to solve this ?
Luka765 said:
How to solve this ?
Click to expand...
Click to collapse
Obviously flash the same or newer firmware.
Another way?
Boot into download mode and confirm the phone's model #.
ROMs for the i9505 are here: http://www.sammobile.com/firmwares/database/GT-I9505/
How? Where can confirm when you get into Download Mode , my country is Serbia I'm here and downloaded firmware , and what we are now talking about here ?
Sorry for bad English
Give us all the info displayed in download mode.
Hello wizards, I am in quite a bind. I attempted to flash a stock recovery by extracting from stock firmware zip to unroot and get OTA, however, it has failed.
Ive attempted to flash 5.1.1 & 6.0.1 to no avail. I did manage to flash stock recovery after several attempts somehow. Here is my Odin log.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1203)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> __XmitData_Write
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
<ID:0/011> Added!!
EDIT: After changing USB ports and flashing 6.0 again, it passed, however it is now in bootloop.
EDIT: After the USB port change and bootloop issue, i was still able to boot into recovery & download mode, although the system was broken, noticeably from the startup being super slow to device information like IMEI being unknown. SO after recovery booting, wipe cache partition, factory reset, reflash stock firmware, the phone should boot up normally. 5.1.1 OTA's here we go :\.
But on the brightside, IMEI is still intact, so if anyone runs into this error, I hope this helps.
A proper UNROOT guide would have been most helpful .....