I followed the instructions here http://forum.xda-developers.com/gal...ng-rooting-t2926642/post56453100#post56453100
model no sghI337
baseband i337ucufnb1
my phone stuck in firmware upgrade encountered an issue please select recovery mode in kies
as previously told to me by others that the phone is not rooted got ahead ask me anything i will tell you more about my device i just want imy device back on stock screw rooting and a custom rom
i am using this phone on a different carrier and different country i got it in a way it could be used on any carrier please help
on oden i see this and even after hours nothing happens <ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> sbl2.mbn
<ID:0/011> sbl3.mbn
<ID:0/011> rpm.mbn
<ID:0/011> tz.mbn
<ID:0/011> boot.img
If you can still get into download mode, it's not bricked. Try different USB ports, cables, computers if possible. Make sure you downloaded the latest version of the Samsung drivers also. And which version of ODIN are you using? You could always try switching to 3.07<>3.09 if you aren't already using one or the other.
Related
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
When flashing modem you have to choose phone.
jluiz2 said:
When flashing modem you have to choose phone.
Click to expand...
Click to collapse
Tried flashing the modem file as a Phone, got the same message as above.
Try to download the file again. Maybe it can be corruped. If you unziped, don´t do it when you try again. Flash the file as you get with odin 3.04. Hope to help you.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUAMDE_MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> modem.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
Check if there is kies running in the background kies should be closed completly then try
I dont have kies installed and Odin worked to install ttwr.
I dont have kies installed and Odin worked to install ttwr.
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
rebel1735 said:
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
Click to expand...
Click to collapse
nope
I have the same problem , tried everything on internet and end up brick my phone. +1 to this problem.
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Carl Blance said:
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Click to expand...
Click to collapse
The issue is , since modem is included in all odin flashable firmwares etc, there is no way to do it. I tried mobile odin, same issue, stucked at "clearing" , tried flash pit file along with stock firmware, tried flash back to original firmware that come with phone, same issue odin stucked at modem.bin. Tried untick "auto-reset" in odin, manual restart, enter download mode , flash again, does not work. Tried switching usb port, switch cable, nothing works.
Error message below :
<ID:2/006> Firmware update start..
<ID:2/006> modem.bin
<ID:2/006> NAND Write Start!!
<ID:2/006> Transmission Complete..
<ID:2/006> Now Writing.. Please wait about 2 minutes
<ID:2/006>
<ID:2/006> Receive Response from boot-loader
<ID:2/006> Complete(Write) operation failed.
Click to expand...
Click to collapse
vega312 said:
Tried flashing the modem file as a Phone, got the same message as above.
Click to expand...
Click to collapse
THANK THANKS!! i did it as you write in my SPH/L720 sprint s4. THANKS AGAIN BRO!!
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
Thanks thanks!!!!
I cannot get a network connection as my sim card is no longer found, even replaced reader but no better. Have tried flashing modem radio firmware but no better, what can I do to get the sim card working again.
The baseband is not available as it is linked to the sim card.
thanks
couldn't flash modem but got it all backworking with my recovery. I still can't GPS. that's my only issue. can't flash back to stock so I guess GPS just won't work for me. Any chance we can get a fix for this with a cm12 rom release to make things easier? This sucks, but I do appreciate all the work that goes into it. It's my fault I can't remember directions. lol
which option u tried pnone or pda
SAME HERE!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pichoD said:
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
may be wrong modem for right frimware or vice versa
Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------
Under this you will see the original post/ question and what i did already. Please read.
----------
Dear XDA Guys (and the rest),
I've got a big problem with my i9505 phone. I've been using the Omega Rom V19 (android 4.3). Before, i tried multiple different roms like AOSB, Paranoid Android and other. Lately my phone for no reason would get stuck and would turn black. I thought i'd go off. But it was when i pressed the power button, it would turn off.
I had enough and wanted to flash the official Samsung Based 4.3 firmware. But when i tried to do this, Odin said that
"There is no PIT partition."
I went into Recovery Mode ( what at the moment was accesable), and wanted to do it manually. I wiped data / cache / dalvik.
(i used philz_touch_6.15.4-jfltexx as my recovery)
But i also formatted cash - preload - system - data
i also wanted to format data SD (media e.g. )
When i tried to format data SD, it went stuck. I couldnt get into recovery after that. But i could go into download mode.
I read about it on XDA, and I downloaded the PIT and tried to flash PIT and official firmware at the same time.
It said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How is it that it sais 'no PIT partition' if i put the PIT file in?
I cant start my phone.. i cant get into recovery.. i only can get in download mode...
What can i do guys?
Ive read multiple threads, but it wasnt really exactly my problem, so that why i made this post.
I hereby thank you.
iillkkaayy
EDIT::
I retried to flash the pit file and the official firmware with odin 3.07
Auto Reboot off
Re-Partition check
F. Reset Time check
It also failed, but come across a different error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl2.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl3.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> rpm.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> aboot.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I Fixed this problem myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
fixed
Thank you all, for... ehm... nothing really..
I Fixed it myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
It worked for me. Hopefully it will help someone else too.
Have a great day.
Well done, and I hope you like kit-kat.
Not solved
theunderling said:
Well done, and I hope you like kit-kat.
Click to expand...
Click to collapse
Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------
Under this you will see the original post/ question and what i did already. Please read.
----------
Dear XDA Guys (and the rest),
I've got a big problem with my i9505 phone. I've been using the Omega Rom V19 (android 4.3). Before, i tried multiple different roms like AOSB, Paranoid Android and other. Lately my phone for no reason would get stuck and would turn black. I thought i'd go off. But it was when i pressed the power button, it would turn off.
I had enough and wanted to flash the official Samsung Based 4.3 firmware. But when i tried to do this, Odin said that
"There is no PIT partition."
I went into Recovery Mode ( what at the moment was accesable), and wanted to do it manually. I wiped data / cache / dalvik.
(i used philz_touch_6.15.4-jfltexx as my recovery)
But i also formatted cash - preload - system - data
i also wanted to format data SD (media e.g. )
When i tried to format data SD, it went stuck. I couldnt get into recovery after that. But i could go into download mode.
I read about it on XDA, and I downloaded the PIT and tried to flash PIT and official firmware at the same time.
It said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How is it that it sais 'no PIT partition' if i put the PIT file in?
I cant start my phone.. i cant get into recovery.. i only can get in download mode...
What can i do guys?
Ive read multiple threads, but it wasnt really exactly my problem, so that why i made this post.
I hereby thank you.
iillkkaayy
EDIT::
I retried to flash the pit file and the official firmware with odin 3.07
Auto Reboot off
Re-Partition check
F. Reset Time check
It also failed, but come across a different error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl2.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl3.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> rpm.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> aboot.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I Fixed it myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
It worked for me. Hopefully it will help someone else too.
Have a great day.
The Samsung leak
Hi where did you get the Samsung file?
OK found the file. But get this:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello, i tried to upgrade my note 3 n9005 from 4.3 to 4.4.2 and it failed in odin and it's keep failing any time I try what can I do ?
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB7_N9005DBTENB2_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> aboot.mbn
<ID:0/011> rpm.mbn
<ID:0/011> tz.mbn
<ID:0/011> sdi.mbn
<ID:0/011> NON-HLOS.bin
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img.ext4
<ID:0/011> modem.bin
<ID:0/011> cache.img.ext4
<ID:0/011> hidden.img.ext4
<ID:0/011> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Removed!!
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Syed Muneeb said:
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Click to expand...
Click to collapse
Have you tried downloading another firmware and flashing it?
No I jst download only 1 firmware for sm-n910h I didnt try another I downloaded from samt
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Syed Muneeb said:
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Click to expand...
Click to collapse
Can you get into recovery mode on your phone and restore an old kitkat backup?
No I couldn't I flash lolipop it's working but I want to downgrade to kit kat
Does downgrade cause hard brick?
I think you have to stay on lollipop now as the bootloader got updated. If you flash lollipop your phone should be back working
Sent from my SM-N910F using Tapatalk
Same thing happened to me. After the odin fail message, I removed the battery, went to download mode again and flashed twrp 2.8.6.1 (latest one). After flashing, it rebooted and working perfectly fine now.
In my own case, I upgraded to marshmallow but am unable to make calls. Saying "Not Registered to Network"