Database Users

[Q] Hard to unbrick

Hey guys...
I need a little help from professionnals...I wanted to try a Cyanogen rom, the 10.1.3, a stable one, on my S4. So I downloaded it, I rooted my phone with cf-autoroot with Odin, intalled CWM Recovery. Then I did all the wipes and flashed the cyanogenmod.
Guess what, it didn't work The flash worked well but next infinite bootloop on the boot animation of cyanogen...So I tryied to go back to recovery, mount USB and flash an another rom of cyanogen. And the results was worse, the flash did'nt work at all, if I remember "failed to mount /system" or something similar. And when I tried to restard the phone, nothing happened.
So I wanted to go back to the stock rom to repair this mess. => Download mode then under PDA, my tar.md5 files. Didn't work. I also tried with a PIT file, same result.
I changed my usb cable, the version of Odin, the usb port.
Here's what Odin give :
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I don't know what to do, I tried a lot of things beside all of this. Any ideas ?
THX

Try install STOCK ROM with older ODIN (click here), no the newest version

What stock rom are you trying to flash?

Thanks, but no change...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Lennyz1988 said:
What stock rom are you trying to flash?
Click to expand...
Click to collapse
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3

BeamGG said:
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3
Click to expand...
Click to collapse
if you have the secured bootloader (knox warranty void 0x0 in download mode) that means you can not flash old firmware such as MGA. you can flash firmwares MH?, MI? or MJ?.

I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.

Lennyz1988 said:
I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.
Click to expand...
Click to collapse
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !

BeamGG said:
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !
Click to expand...
Click to collapse
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.

need4steer said:
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.
Click to expand...
Click to collapse
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?

BeamGG said:
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?
Click to expand...
Click to collapse
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!

need4steer said:
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!
Click to expand...
Click to collapse
Cool, you are welcome ! :good:

[Q] Soft Bricked i9505 (?)

Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------
Under this you will see the original post/ question and what i did already. Please read.
----------
Dear XDA Guys (and the rest),
I've got a big problem with my i9505 phone. I've been using the Omega Rom V19 (android 4.3). Before, i tried multiple different roms like AOSB, Paranoid Android and other. Lately my phone for no reason would get stuck and would turn black. I thought i'd go off. But it was when i pressed the power button, it would turn off.
I had enough and wanted to flash the official Samsung Based 4.3 firmware. But when i tried to do this, Odin said that
"There is no PIT partition."
I went into Recovery Mode ( what at the moment was accesable), and wanted to do it manually. I wiped data / cache / dalvik.
(i used philz_touch_6.15.4-jfltexx as my recovery)
But i also formatted cash - preload - system - data
i also wanted to format data SD (media e.g. )
When i tried to format data SD, it went stuck. I couldnt get into recovery after that. But i could go into download mode.
I read about it on XDA, and I downloaded the PIT and tried to flash PIT and official firmware at the same time.
It said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How is it that it sais 'no PIT partition' if i put the PIT file in?
I cant start my phone.. i cant get into recovery.. i only can get in download mode...
What can i do guys?
Ive read multiple threads, but it wasnt really exactly my problem, so that why i made this post.
I hereby thank you.
iillkkaayy
EDIT::
I retried to flash the pit file and the official firmware with odin 3.07
Auto Reboot off
Re-Partition check
F. Reset Time check
It also failed, but come across a different error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl2.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl3.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> rpm.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> aboot.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I Fixed this problem myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC

fixed
Thank you all, for... ehm... nothing really..
I Fixed it myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
It worked for me. Hopefully it will help someone else too.
Have a great day.

Well done, and I hope you like kit-kat.

Not solved
theunderling said:
Well done, and I hope you like kit-kat.
Click to expand...
Click to collapse
Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] soft brick i9505 Movinand Checksum Confirmation Fail

Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------
Under this you will see the original post/ question and what i did already. Please read.
----------
Dear XDA Guys (and the rest),
I've got a big problem with my i9505 phone. I've been using the Omega Rom V19 (android 4.3). Before, i tried multiple different roms like AOSB, Paranoid Android and other. Lately my phone for no reason would get stuck and would turn black. I thought i'd go off. But it was when i pressed the power button, it would turn off.
I had enough and wanted to flash the official Samsung Based 4.3 firmware. But when i tried to do this, Odin said that
"There is no PIT partition."
I went into Recovery Mode ( what at the moment was accesable), and wanted to do it manually. I wiped data / cache / dalvik.
(i used philz_touch_6.15.4-jfltexx as my recovery)
But i also formatted cash - preload - system - data
i also wanted to format data SD (media e.g. )
When i tried to format data SD, it went stuck. I couldnt get into recovery after that. But i could go into download mode.
I read about it on XDA, and I downloaded the PIT and tried to flash PIT and official firmware at the same time.
It said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How is it that it sais 'no PIT partition' if i put the PIT file in?
I cant start my phone.. i cant get into recovery.. i only can get in download mode...
What can i do guys?
Ive read multiple threads, but it wasnt really exactly my problem, so that why i made this post.
I hereby thank you.
iillkkaayy
EDIT::
I retried to flash the pit file and the official firmware with odin 3.07
Auto Reboot off
Re-Partition check
F. Reset Time check
It also failed, but come across a different error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl2.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl3.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> rpm.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> aboot.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I Fixed it myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
It worked for me. Hopefully it will help someone else too.
Have a great day.

The Samsung leak
Hi where did you get the Samsung file?
OK found the file. But get this:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] [HELP] Odin can't pass sbl2.mdn file during flash

Hi guys, I'm new here
I'm having problems during the flash of any of these 3 roms:
I9505XXUGNF1_I9505ITVGNF1_I9505XXUGNF1_HOME.tar
I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar
I9505XXUGNJ8_I9505OXXGNK1_I9505XXUGNJ8_HOME.tar
Here is my odin report (I've tried all the odins 1.85, 3.04, 3.07, 3,09)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNJ8_I9505OXXGNK1_I9505XXUGNJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> sbl2.mbn
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
NOTE: The phone was rooted with the I9505XXUGNF1 rom and then flashed a Phoenix ROM using CWM on a SD. I've flashed a modem because I was loosing the carrier often and reading on google that plp have fixed this issue this way, during the flash it stopped and now I'm stuck with odin not flashing any rom and the device stuck with the message that tells you that there was a problem, try with kies (kies is not even recognizing it). I'd like to have the device back with the stock ROM and that bug of the carries fixed if is possible.
Thx, Francesco.

CRY123 said:
Hi guys, I'm new here
I'm having problems during the flash of any of these 3 roms:
I9505XXUGNF1_I9505ITVGNF1_I9505XXUGNF1_HOME.tar
I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar
I9505XXUGNJ8_I9505OXXGNK1_I9505XXUGNJ8_HOME.tar
Here is my odin report (I've tried all the odins 1.85, 3.04, 3.07, 3,09)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNJ8_I9505OXXGNK1_I9505XXUGNJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> sbl2.mbn
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
NOTE: The phone was rooted with the I9505XXUGNF1 rom and then flashed a Phoenix ROM using CWM on a SD. I've flashed a modem because I was loosing the carrier often and reading on google that plp have fixed this issue this way, during the flash it stopped and now I'm stuck with odin not flashing any rom and the device stuck with the message that tells you that there was a problem, try with kies (kies is not even recognizing it). I'd like to have the device back with the stock ROM and that bug of the carries fixed if is possible.
Thx, Francesco.
Click to expand...
Click to collapse
try reading this thread
http://forum.xda-developers.com/showthread.php?p=53275060#post53275060

Zaraee said:
try reading this thread
http://forum.xda-developers.com/showthread.php?p=53275060#post53275060
Click to expand...
Click to collapse
Hi, I've already tried to reinstall the USB drivers, used different usb port, used the laptop... Even tried to flash the right PIT file, which did flashed ok, then it failed onto the same file..
I've succefully flashed on the MODEM, and i've got the Galaxy S4 logo as normal but it was stuck there, so i've tried to flash the last ufficial ROM unj8 something and... failed onto the system image, stuck again...

Anyone?

CRY123 said:
Anyone?
Click to expand...
Click to collapse
the last thing i ever tried when my phone bricked is to use kies..i use that when my download failed and stuck on samsung logo

Errors With Odin

I am trying to flash a stock rom on my Note 4 Exynos Version, with odin I have tried the latest version as well as some older ones. I have tried flashing both kit kat & lollipop but always get the same error. I have usb debugging ticked.
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
why is this happening?
Ta

Any help guys?

@home said:
Any help guys?
Click to expand...
Click to collapse
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )

ArmanFGT said:
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )
Click to expand...
Click to collapse
I followed your instructions and this is what I'm getting. Now what I need to do further? Previously I was using Sixperience ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

sirius_gamer said:
I followed your instructions and this is what I'm getting. Now what I need to do further? Previously I was using Sixperience ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
well , i dont really know what the XmitData_write is , as i havent seen it since my s4 (everything was fine) ..
i think wiping would solve the Prob...
or maybe USB cable or odin version (+drivers)
2. if nothing works around ... try using KIES emergency updating ... its always the sweety

odin3 v 3.12
i have same problem;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

sdstc said:
odin3 v 3.12
i have same problem;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem

sdstc said:
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem
Click to expand...
Click to collapse
@sdstc is right you can fix __XmitData_Write with changing the cable
i used an original sammy cable and it didnt work. than i used another sammy cable and then it just worked
my device was a Tab S btw no note 4 or s4
bu arada cok sagol sdstc kardes

TimurAlaskara_TR said:
@sdstc is right you can fix __XmitData_Write with changing the cable
i used an original sammy cable and it didnt work. than i used another sammy cable and then it just worked
my device was a Tab S btw no note 4 or s4
bu arada cok sagol sdstc kardes
Click to expand...
Click to collapse
i all the time face with that error and i forgot use original cable
(ne için teşekkür?)

sdstc said:
i all the time face with that error and i forgot use original cable
(ne için teşekkür?)
Click to expand...
Click to collapse
Sen olmasan telefon hala bozuktu cunku sjsjsj

help plz
sdstc said:
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem
Click to expand...
Click to collapse
<OSM> Please wait..
<OSM> N910CXXS2DQG1_N910COXA2DPH1_N910CXXU1DPC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)