Errors With Odin - Galaxy Note 4 Q&A, Help & Troubleshooting

I am trying to flash a stock rom on my Note 4 Exynos Version, with odin I have tried the latest version as well as some older ones. I have tried flashing both kit kat & lollipop but always get the same error. I have usb debugging ticked.
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
why is this happening?
Ta

Any help guys?

@home said:
Any help guys?
Click to expand...
Click to collapse
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )

ArmanFGT said:
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )
Click to expand...
Click to collapse
I followed your instructions and this is what I'm getting. Now what I need to do further? Previously I was using Sixperience ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

sirius_gamer said:
I followed your instructions and this is what I'm getting. Now what I need to do further? Previously I was using Sixperience ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
well , i dont really know what the XmitData_write is , as i havent seen it since my s4 (everything was fine) ..
i think wiping would solve the Prob...
or maybe USB cable or odin version (+drivers)
2. if nothing works around ... try using KIES emergency updating ... its always the sweety

odin3 v 3.12
i have same problem;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

sdstc said:
odin3 v 3.12
i have same problem;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem

sdstc said:
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem
Click to expand...
Click to collapse
@sdstc is right you can fix __XmitData_Write with changing the cable
i used an original sammy cable and it didnt work. than i used another sammy cable and then it just worked
my device was a Tab S btw no note 4 or s4
bu arada cok sagol sdstc kardes

TimurAlaskara_TR said:
@sdstc is right you can fix __XmitData_Write with changing the cable
i used an original sammy cable and it didnt work. than i used another sammy cable and then it just worked
my device was a Tab S btw no note 4 or s4
bu arada cok sagol sdstc kardes
Click to expand...
Click to collapse
i all the time face with that error and i forgot use original cable
(ne için teşekkür?)

sdstc said:
i all the time face with that error and i forgot use original cable
(ne için teşekkür?)
Click to expand...
Click to collapse
Sen olmasan telefon hala bozuktu cunku sjsjsj

help plz
sdstc said:
problem is using UN-OFFICIAL USB CABLE
use FACTORY CABLE FIXes problem
Click to expand...
Click to collapse
<OSM> Please wait..
<OSM> N910CXXS2DQG1_N910COXA2DPH1_N910CXXU1DPC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Related

need help asap. cant reflash stock FW

i need help. i tried to flash a custom rom. it didnt work. so i thought go bad to stock. i have a i747 on rogers . odin3 keeps failing and im stumped. been googling all day and i cant figure it out can some help me please
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLALE8_I747MOYAALE8_20120523.225040 _REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Read ..
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is what i got
i got it finally. for some reason i had to take the .md5 off and just leave it .tar

[Q] Hard to unbrick

Hey guys...
I need a little help from professionnals...I wanted to try a Cyanogen rom, the 10.1.3, a stable one, on my S4. So I downloaded it, I rooted my phone with cf-autoroot with Odin, intalled CWM Recovery. Then I did all the wipes and flashed the cyanogenmod.
Guess what, it didn't work The flash worked well but next infinite bootloop on the boot animation of cyanogen...So I tryied to go back to recovery, mount USB and flash an another rom of cyanogen. And the results was worse, the flash did'nt work at all, if I remember "failed to mount /system" or something similar. And when I tried to restard the phone, nothing happened.
So I wanted to go back to the stock rom to repair this mess. => Download mode then under PDA, my tar.md5 files. Didn't work. I also tried with a PIT file, same result.
I changed my usb cable, the version of Odin, the usb port.
Here's what Odin give :
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I don't know what to do, I tried a lot of things beside all of this. Any ideas ?
THX
Try install STOCK ROM with older ODIN (click here), no the newest version
What stock rom are you trying to flash?
Thanks, but no change...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Lennyz1988 said:
What stock rom are you trying to flash?
Click to expand...
Click to collapse
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3
BeamGG said:
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3
Click to expand...
Click to collapse
if you have the secured bootloader (knox warranty void 0x0 in download mode) that means you can not flash old firmware such as MGA. you can flash firmwares MH?, MI? or MJ?.
I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.
Lennyz1988 said:
I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.
Click to expand...
Click to collapse
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !
BeamGG said:
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !
Click to expand...
Click to collapse
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.
need4steer said:
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.
Click to expand...
Click to collapse
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?
BeamGG said:
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?
Click to expand...
Click to collapse
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!
need4steer said:
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!
Click to expand...
Click to collapse
Cool, you are welcome ! :good:

[Q] Galaxy s4 GT-i9505

Hi Guys Hope you can rescue me. I had an automatic firmware update pending on my phone this morning so I ran it. It all seemed to go fine and it rebooted but I initially noticed that some desktop icons were missing. Then I noticed that you could not turn on wifi. I tried both from drop down and in settings but it would revert back to off each time. I googled it and found a few others had the problem and it was suggested that a hard reset may fix it. I did that but no joy.
Next step was to download odin 3.09 and a stock rom. This I did, the stock rom was a uko2 rom from here...hxxp://samsung-updates.com/latest-firmware/ I followed the tutorial to flash the rom and I get this (auth) Fail. here is a copy of the odin log...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched on here and found some hits one was to load a pit file as well but it fails the same way the file I am loading is an MD5 file and I read somewhere it may have to be a ME7 file but I cant find that anywhere.Can some guru please help this frustrated user out as its doing my head in. Many thanks guys
If the OTA update received was android 4.4.2, maybe u updated your bootloader and you cant come back to android 4.3. You will have to flash through ODIN this firmware: HERE
Joku1981 said:
If the OTA update received was android 4.4.2, maybe u updated your bootloader and you cant come back to android 4.3. You will have to flash through ODIN this firmware: hxxp://rapidgator.net/file/e4df24422154b8c1320925eceb5d4f1f"]HERE
Click to expand...
Click to collapse
Thanks for this Joku1981. I am downloading it now and will update thread when I have tried it.
steve67474 said:
Thanks for this Joku1981. I am downloading it now and will update thread when I have tried it.
Click to expand...
Click to collapse
OK have downloaded and run the odin program it seemed to go fine but right at the endjust after the system load it failed again:crying: Here is the odin log...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505O2UFNA2_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Thought we cracked it
steve67474 said:
OK have downloaded and run the odin program it seemed to go fine but right at the endjust after the system load it failed again:crying: Here is the odin log...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505O2UFNA2_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Thought we cracked it
Click to expand...
Click to collapse
OK an update. I removed the battery for 5 mins and rerun and hey presto it worked. Great forum and thanks again for the support

[Q] Flash Stock Rom on Odin Fail

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi guys my phone having some boot loop issue after a OTA update, I downloaded the latest stock rom from sammobile and tried to flash via odin but keep getting fail after the modem.bin part, did I did something wrong?
kktan said:
Hi guys my phone having some boot loop issue after a OTA update, I downloaded the latest stock rom from sammobile and tried to flash via odin but keep getting fail after the modem.bin part, did I did something wrong?
Click to expand...
Click to collapse
Guys bad news, i went to service centre and they said my phone motherboard spoilt, need to pay RM870 to change to new motherboard as my warranty just finished last week! bad luck. I declined the offer and gonna try to flash the stock firmware myself.
Currently i still able to boot into my phone, but it will keep restarting suddenly, all sorts of goodleapps not working, samsung keyboard not working or go into infinite bootloop, is this hardware issue or software related more?
When the samsung keyboard failed, i cant key in anything at all, but im able to make call but i have no contact coz cant signin to google to retrieve my contacts.
I downloaded the latest rom from sammobile and tried to use odin to flash the stock firmware but it will fail with the this error after modem.bin
QUOTE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
looks like i might need to root the phone and try my luck on custom rom but i cant sign in to playstore to download certain app
any recommendation guys?
did you check the MD5 of the rom you dl???change ODIN version you use
for rooting your phone you don't need to dl files from market.. Use cf auto-root

Help cant install rom

hell guys i want install stock rom i was on phoenix rom i download a rom to put via odin.
always stuck on this
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUGNI2_I9505ZTOGNI2_I9505VJUGNI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
i need help fast as posible please
Different usb cable
Different usb port
Or maybe a stock 4.4.2 rom if you were on 4.4.2 kitkat.
Or a stock 4.4.2 or stock 4.3 if you were on 4.3 jellybean.
In short
Latest Kitkat over kitkat
Kitkat/Jellybean over jellybean.
Sent from my GT-I9500 using XDA Free mobile app

Categories

Resources